3M Multimedia Projector Mp8780 Operators Manual
Have a look at the manual 3M Multimedia Projector Mp8780 Operators Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 307 3M manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
MP8780 Projecteur multimŽdia Guide de lopŽrateur MP8780 Multimedia-Projektor Benutzerhandbuch Proyector de Multimedia MP8780 Manual del Usuario MP8780 Proiettore Multimediale Manuale delloperatore MP8780 Bruksanvisning for multimediaprojektor MP8780 Multimedia Projector Gebruiksaanwijzing MP8780 Multimedia Projector Operators Guide EPS-57A
© 3M 1999 3Mª Multimedia Projector MP8780
ENGLISH
3
Safeguards
INTENDED USE
Before operating the machine, please read the entire manual thoroughly. The 3Mª Multimedia Projector 8780 was
designed, built and tested for use indoors, using 3Mª brand lamps, 3Mª brand ceiling mount hardware and nominal local
voltages. This projector is not intended for household use. The use of other replacement lamps, outdoor operation or
different voltages has not been tested and could damage the projector or peripheral equipment and/or create a potentially
unsafe operating condition.
IMPORTANT SAFEGUARDS
1. Read and understand all instructions before using.
Pay particular attention to areas where this symbol is shown.
WARNING - Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury.
Caution - Indicates a potentially hazardous situation which, if not avoided, could result in minor or moderate injury.
It may also be used to alert against unsafe practices.
4 Note - Used to emphasize important conditions or details.
2. Close supervision is necessary when any appliance is used by or near children. Do not leave appliance unattended
while in use.
3. Never look directly into the projector lens when the lamp is on. The high pressure mercury lamp produces a strong
light which could damage your eyesight.
4. Care must be taken as burns can occur from touching hot parts.
5. Do not operate appliance with a damaged cord or if the appliance has been dropped or damaged Ð until it has been
examined by a qualified service technician.
6. Position the cord so that it will not be tripped over, pulled, or contact hot surfaces.
7. If any extension cord is necessary, a cord with a current rating at least equal to that of the appliance should be used.
Cords rated for less amperage than the appliance may overheat.
8. Always unplug appliance from electrical outlet before cleaning and servicing and when not in use. Grasp plug and
pull to disconnect.
9. To reduce the risk of electric shock, do not immerse this appliance in water or other liquids.
10. To reduce the risk of electric shock, do not disassemble this appliance, but take it to a qualified technician when
service or repair work is required. Incorrect assembly can cause electric shock when the appliance is subsequently
used.
11. Connect this appliance to a grounded outlet.
12. Do not expose this projector to direct sunlight, or use it outside.
13. Keep all ventilation openings free of any obstructions.
14. Always open the lens shutter or remove lens cap when the projection lamp is on.
15. Do not look directly into light beam of laser pointer. The pointer produces a strong light which could damage your
eyesight.
16. The projection lamp contains mercury. Always dispose of it in a proper manner according to local regulations.
17. To avoid premature lamp failure, do not change the mounting position of the projector
(desktop
î ceiling mount or ceiling î desktop mount) and continue to use the same lamp.
18. Always operate machine on a flat, sturdy surface.
3Mª Multimedia Projector MP8780© 3M 1999 ENGLISH 4 SAVE THESE INSTRUCTIONS The information contained in this manual will help you operate and maintain your 3M MP8780 Multimedia Projector. LOCATION OF PRODUCT SAFETY LABELS Safety labels are used on or within the 8780 projector to alert you to items or areas requiring your attention. HIGH TEMPERATUREMAY CAUSE BURNS. REPLACE THE LAMP UNIT ONLY AFTER IT HAS COOLED. EXPLOSIONTHE LAMP MAY EXPLODE WHILE IT IS LIT. HANDLE THE LAMP CAREFULLY SO AS NOT TO DAMAGE IT. CAUTION ATTENTION! Important This projection lamp contains mercury. Consult your local hazardous waste regulations and dispose of this lamp in a proper manner. DO NOT REMOVE SCREWS EXCEPT USER SERVICE SCREWS HIGH TEMPERATUREMAY CAUSE BURNS.REPLACE THE LAMP UNIT ONLY AFTER IT HAS COOLED. REPLACE WITH THE SAME LAMP UNIT. HIGH VOLTAGEMAY CAUSE AN ELECTRIC SHOCK AND ULTRAVIOLET. REPLACE THE LAMP AFTER FIRST REMOVING THE POWER PLUG FROM THE OUTLET. THIS COVER IS PROVIDED WITH AN INTERLOCK. DONT DEFEAT THIS INTERLOCK. DO NOT BLOCK THE VENTILATION HOLES (SIDE AND UNDERNEATH) OF THE UNIT. THIS MAY CAUSE A FAILURE. LISTED UL 1950 685Z E73930 Visual Systems Division Austin, TX 78726-9000AC100-240V 6.5A-2.7A 50/60HZ MADE IN JAPAN This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. LCD PROJECTORMOD NO. MP8780 DO NOT STARE DIRECTLY INTO THE PROJECTION LENS. WARNING
© 3M 1999 3Mª Multimedia Projector MP8780 ENGLISH 5 Warranty LIMITED WARRANTY 3M warrants this product against any defects in material and workmanship, under normal usage and storage, for a period of two years from date of purchase. Proof of purchase date will be required with any warranty claim. In the event this product is found to be defective within the warranty period, 3Ms only obligation and your exclusive remedy shall be replacement of any defective parts (labor included). To obtain warranty service, immediately notify the dealer from which you purchased the product of any defects. In the USA call 1-800-328-1371 for warranty or repair service. LIMITATION OF LIABILITY THE FOREGOING WARRANTY IS MADE IN LIEU OF ALL OTHER WARRANTIES, EXPRESSED OR IMPLIED, AND 3M SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTY OF MERCHANTIBILITY AND FITNESS. 3M SHALL NOT BE LIABLE FOR ANY DAMAGES, DIRECT, CONSEQUENTIAL, OR INCIDENTAL, ARISING OUT OF THE USE OR INABILITY TO USE THIS PRODUCT. Important: The above warranty shall be void if the customer fails to operate product in accordance with 3Ms written instruction.This warranty gives you specific legal rights and you may have other rights which vary from state to state. FCC STATEMENT - CLASS A: This equipment generates, uses and can radiate radio frequency energy, and if not installed and used in accordance with the instruction manual may cause interference to radio communications. It has been tested and found to comply with the limits for a Class A computing device pursuant to Subpart B of Part 15 of the FCC Rules, which are designed to provide reasonable protection against such interference when operated in a commercial environment. Operation of this equipment in a residential area is likely to cause interference in which case the user at his/ her own expense will be required to take whatever measures may be required to correct the interference. EEC STATEMENT: This machine was tested against the 89/336/EEC (European Economic Community) for EMC (Electro Magnetic Compatibility) and fulfills these requirements. Video Signal Cables: Double shielded coaxial cables (FCC shield cable) must be used and the outer shield must be connected to the ground. If normal coaxial cables are used, the cable must be enclosed in metal pipes or in a similar way to reduce the interference noise radiation. Video Inputs: The input signal amplitude must not exceed the specified level. PATENTS, TRADEMARKS & COPY RIGHTS IBM is a registered trademark of International Business Machines Corporation. Apple Macintosh and Apple Powerbook are registered trademarks of Apple Computer, Inc. Microsoft and Windows 95 & Windows 98 are registered trademarks, and Windows and Windows for Workgroups are trademarks of the Microsoft Corporation. Toshiba is a registered trademark of Toshiba Corporation. All other products are trademarks or registered trademarks of their respective companies.
3Mª Multimedia Projector MP8780© 3M 1999 ENGLISH 6 Section 1: Unpack 1.1 Contents of Shipping Box The 3Mª MP8780 Multimedia Projector is shipped with the necessary cables required for standard VCR, PC, MACª II or laptop computer connections. Carefully unpack and verify that you have all of the items shown below in Figure 1.1. If any of these items are missing, please contact your place of purchase. Figure 1.1 Inventory of Shipping Box 1.2 Optional Accessories ¥ RS-232 control cable.................................................... (1) ¥ Gender Change SVGA MAC Monitor Adaptor........... (1) ¥ USB mouse cable.......................................................... (1) 1.3 Keep Your Packing Materials 4 Important Save the shipping box and packing materials in the event the MP8780 should require shipping to a 3M Service Center for repair. 1.4 Whats Next? After you have unpacked the MP8780 system and identified all the parts, you are ready to set up the projector. We hope you will enjoy using this high performance product in your meetings, presentations and training sessions. This product has been produced in accordance with 3Ms highest quality and safety standards to ensure smooth and trouble free use in the years to come. Power Cord US, UK, Europe PS/2 Adapter Cable 3-Conductor Video/Audio CableMP8780 Multimedia ProjectorRemote Control TransmitterLens CapMAC Adaptor VGA Cable (15-15 pin M/M)Serial Mouse Cable Video Cable (S-Video mini DIN4-pin) STANDBY/ON MUTE MENUBACK LIGHT SELECTRESET VOLUME FOCUS VIDEO RGB ZOOM L RDRAG BLANK RCA to Stereo Mini Jack R L ADB Adapter Cable 1 OFFON 6 5 4 3 2
© 3M 1999 3Mª Multimedia Projector MP8780 ENGLISH 7 Section 2: Product Description 2.1 Machine Characteristics The MP8780 Multimedia Projector integrates ultra-high bright lamp and polysilicon LCD display technology into a single unit. It accepts input from three different computer sources and three video/audio sources and projects a bright, super crisp image. Switching your presentation from a computer input to a video input, and then back to a computer input simply requires the push of a button on the remote control keypad or control panel keypad. The MP8780 Multimedia Projector offers the following features: ¥ Ultra-high brightness projection lamp ¥ Real XGA (1.8 inch XGA HTPS LCD panels with high aperture ratio) ¥ Intelligent scaling for UXGA, SXGA,XGA, SVGA, VGA ¥ Automatic optimum source selection display ¥ USB, Serial, PS/2 and Apple Desktop Bus (ADB) mouse emulation ¥ Manual lens shift without keystone correction ¥ Power zoom and focus ¥ Freeze and Magnify Functions ¥ Picture-in-picture (PIP) ¥ Timer function ¥ Two internal stereo speakers (3W x 2) ¥ Three computer inputs: RGB1, RGB2, RGB3 (BNC)¥ Three video inputs: Video1, Video2, Video3 ¥ Easy to set up and use ¥ Ability to display 16.7 million colors ¥ Digital Gamma Correction ¥ High resolution and component video compatible ¥ Higher resolution for video by de-interlacing ¥ Full function remote control ¥ Volume control for external speakers ¥ RS-232 control capability ¥ Horizontal and vertical image inverting ¥ Horizontal and vertical image position control ¥ Automatic keystone correction ¥ On screen menus in seven languages ¥ IR remote control sensor in front/rear ¥ Color balance control for data/video ¥ Optional ceiling mount kit 4 Note The MP8780 is one of the brightest projectors in the marketplace. The brightness of your machine will vary depending on the ambient room conditions and contrast/brightness settings.
3Mª Multimedia Projector MP8780© 3M 1999 ENGLISH 8 8 9 2 7 STANDBY/ON MUTE MENUBACK LIGHT SELECT RESETVOLUME FOCUS VIDEO RGB ZOOM LRDRAG BLANK 1 13 OI 12 11 102 3 4 5 6 EPS-59A 2.2 Part Identification List Figure 2.2 Identifying MP8780 Parts 1. Operation Panel a) STANDBY/ON button b) Input Source: RGB/Video c) Mute, Blank, Volume, Zoom, Focus d) Display Menu (On/Off) e) Select button (select displayed value) f) Arrow Direction buttons (left/right or up/down) 2. Remote Control Sensors (front/back) 3. Stereo Speakers 4. Terminal Connection Panels a) S-Video, Video, Audio inputs b) RGB1, RGB2 and RGB3 inputs c) RGB output d) Audio L/R input, Audio output (RCA jack) e) RS-232 Control f) UBS Port g) Mouse control port (serial/PS/2/ADB) h) RGB3 or component video (BNC)5. Image Shift Control 6. Height Adjustment Feet 7. Projection lens 8. Carry Handle 9. LED Indicators a) Lamp b) Temperature c) Fan d) Cover open e) Change lamp f) Power On 10. AC Power Cord Input 11. Main Power Switch (On/Off) 12. Lamp Access Door 13. Remote Control Transmitter
© 3M 1999 3Mª Multimedia Projector MP8780 ENGLISH 9 2.3 System Setup - Connecting Various Equipment It only takes a few minutes to connect the 3Mª Multimadia Projector MP8780 to your computer, VCR, or other device. Always disconnect the projector power before connecting any cables. Connection Terminals Video Connections OI RGB1 L VIDEO1R L R VIDEO2 SERIAL MOUSEL R USB RGB2 RGBOUT PUTIN PUTRGB3/VIDEO3R/Y(CV) G/U B/V LR LRLR HS VS EPS-142A VIDEO1 L R VCR RED WHT YEL Audio L/R Video OUT OUT OUTIN IN IN VIDEO2 L R OUT Laser Disc S-VHS RED WHT OUTOUT INININ Audio Left Audio Right Turn power off to all devices before making connections. Never plug anything into the projector or computer while any device is in operation. The MP8780 must be powered down when making connections. The mouse emulation (except USB) may not work if the unit is not powered down before the mouse cable connections are made. Caution Computer Connections CRT DisplayRGB OUTININ Audio LeftAudio Right RGBOUT PUT LR IN OUT OUTOUT OUT PS/2 or SERIAL PORT SERIAL MOUSE USB ININ PCOUT OUT MONITOR PORTPC RGB1 LRRGB2IN PUT LR ININ Audio Left Audio Right ININ Audio Right Audio Left ININ MAC OUTOUT MONITOR PORT MAC AdaptorOUT 1 OFFON 6 5 4 3 2 EPS-143A RGB3/VIDEO3R/Y(CV) G/U B/V LR HS VS BNC Connections