Home > 3M > Projector > 3M Multimedia Projector Mp8760 Operators Manual

3M Multimedia Projector Mp8760 Operators Manual

    Download as PDF Print this page Share this page

    Have a look at the manual 3M Multimedia Projector Mp8760 Operators Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 307 3M manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    							26 3M Multimedia Projector MP8760 3M IPC 2000
    ENGLISH
    A-2. Power Cord Sets
    A standard power cord set (U.S., UK, or European) will be included with each MP8760. If you need a special power
    cord set, contact your local 3M authorized dealer. The power cords must be in accordance with the regional and
    corresponding national safety regulations and be properly approved. Examples of these power cords are shown below.
    North America
    UL Listed  CSA Certified
    15A 125VAC
    Germany, Netherlands,
    Spain, France, Greece
    VDE Certified
    10A 250VAC
    Great Britain
    AUSTA Certified
    13A 250VAC
    Italy
    IMQ or BASEC
    Certified
    10A 250VAC
    Switzerland
    SEV Certified
    10A 250VAC
    Australian
    SAA Certified
    10A 250VAC
    Denmark
    Complies with Danish
    Standard
    6/10A 250VAC 
    						
    							 3M IPC 2000 3M Multimedia Projector MP8760 27
    ENGLISH
    A-3. Changing Of The IR-Remote-Control Address
    Changing of the IR-Remote-Control address:
    You can choose one out of  four different IR-RC addresses for the projector, so you can control four projectors
    separately without any interferencies to another projector.
    To change an address from the standard address #1, go to the Advanced Setup menu and choose an address of your
    choice under the menu item RC Address (1...4). Confirm your selection with the Enter button.
    After this point you cant control the projector with the IR-RC transmitter anymore until you change the transmitter
    address to the same address. (Of course, you still can enter the menu system and change back the address with the
    Control Panel of the projector!)
    To change the address of the IR-RC transmitter, please press the Mode button and an address number (buttons 1,2,3
    or 4) simultaneously for 4 seconds on the IR-RC transmitter.
    After this you should be able to control the projector by IR-RC again if youve choosen the same address for the
    projector and the IR-RC transmitter.
    A-4. Resetting The Projector To Factory Default Settings
    The factory default settings of the projector can be restored by pressing Enter and Mute simultaneously on the
    control panel when switching on the main power switch of the projector and pressing the Standby button afterwards.
    The projector will start immediately and the message “Parameter factory settings restored” displayed in the starting
    screen will indicate the default settings are reset.
    If youve had selected another menu language as english, which is the default language, youll have to select your
    menu language again. 
    						
    							28 3M Multimedia Projector MP8760 3M IPC 2000
    ENGLISH
    A-5. Supported Data Modes and Resolutions
    Table of the predefined Data modes:
    Data Mode Name Resolution
    Hor. x Vert.Horizontal
    Frequency
    kHzVertical
    Frequency
    HzPixel-
    Clock
    MHz
    VGA 640 x 350 640 x   350 30,000 70,000 25
    VESA 640 x 350 85Hz 640 x   350 37,861 85,081 32
    VGA Text 720 x 350 720 x   350 31,469 70,087 28
    VGA 640 x 400 640 x   400 25,560 60,000 25
    VESA 640 x 400 85Hz 640 x   400 37,861 85,081 32
    VGA Text 720 x 400 720 x   400 31,469 70,087 28
    VGA 640 x 480 640 x   480 31,469 59,941 25
    VESA 640 x 480 72Hz 640 x   480 37,861 72,810 32
    VESA 640 x 480 75Hz 640 x   480 37,500 75,000 32
    VESA 640 x 480 85Hz 640 x   480 43,269 85,008 36
    VESA 800 x 600 56Hz 800 x   600 35,156 56,250 36
    VESA 800 x 600 60Hz 800 x   600 37,879 60,317 40
    VESA 800 x 600 72Hz 800 x   600 48,077 72,188 50
    VESA 800 x 600 75Hz 800 x   600 46,875 75,000 50
    VESA 800 x 600 85Hz 800 x   600 53,674 85,062 56
    VESA 1024 x 768 43Hz 1024 x   768 35,522 86,957 45
    VESA 1024 x 768 60Hz 1024 x   768 48,363 60,004 65
    VESA 1024 x 768 70Hz 1024 x   768 56,476 70,069 75
    VESA 1024 x 768 75Hz 1024 x   768 60,023 75,029 79
    VESA 1024 x 768 85Hz 1024 x   768 68,677 84,996 95
    VESA 1152 x 864 75Hz 1152 x   864 67,500 75,000 108
    VESA 1280 x 960 60Hz 1280 x   960 60,000 60,000 108
    VESA 1280 x 1024 60Hz 1280 x 1024 63,981 60,020 108
    VESA 1280 x 1024 75Hz 1280 x 1024 79,975 75,024 136
    Mac 640 x 480 640 x   480 35,000 66,667 30
    Mac LC 640 x 480 640 x   480 34,975 66,619 31
    Quadra 832 x 624 832 x   624 49,107 75,087 57
    Mac 1024 x 768 1024 x   768 60,241 74,927 80
    Mac 1152 x 870 1152 x   870 68,681 75,062 100
    Mac 1280 x 960 1280 x   960 85,938 85,003 139
    Sun 1152 x 900 66Hz 1152 x   900 61,846 66,004 95
    Sun 1152 x 900 76Hz 1152 x   900 71,713 76,047 105
    Table of predefined Resolutions for User-Mode 1...3:
    Predefined Resolutions
      640 x   350
      720 x   350
      640 x   400
      720 x   400
      640 x   480
      800 x   600
      832 x   624
    1024 x   768
    1152 x   864
    1152 x   870
    1152 x   900
    1280 x   960
    1280 x 1024
     
      
    						
    							 3M IPC 2000 3M Multimedia Projector MP8760 29
    ENGLISH
     
      
    						
    							 
    ENGLISH
    lamps are considered consumable items and are warrantied for 90 days or \
    180 hours of operation, whichever occurs first. 3M MAKES NO OTHER WARRANTIES, 
    						
    All 3M manuals Comments (0)

    Related Manuals for 3M Multimedia Projector Mp8760 Operators Manual