3M MP8020 Manual

93ME Multimedia Projector MP8020
W 1996
Projector to Viewing Screen Alignment
The size of the projection screen and the distance of the projector to the screen are important considerations for
determining the best placement of the projector.  After the best projector to screen distance has been
determined,  the position of the projection screen in relation to the center of the projection lens must be
considered.
905
Figure 3-14. Top View
b
aa = Distance to viewing screen
b = Center of lens to bottom of...

103ME Multimedia Projector MP8020
W 1996
Adjusting the Projector Elevation
The elevation can be adjusted by turning the foot adjuster to raise or lower the angle of the projector.
75
Figure 3-16. Side View
Note
Both adjusting feet must be raised or lowered the same amount to project a level image on the
viewing screen.    The elevation can be adjusted up to seven degrees.
3-3. Now What?
Your MP8020 is now connected and ready to power on. Turn to Section 4 for details on operating the
projector....

... + FOCUS + ...
113ME Multimedia Projector MP8020
W 1996
Section 4: Operating the Projector
4-1. Turning On the Projector
Read the Important Safeguards before operating the MP8020 projector.
Refer to Section 3 to make all cable connections.  When the input cables and power cords are connected, turn
on the power, adjust the size and focus of the projected image and begin your presentation.
Power On: Turn on the projector power, then turn on the power to your input sources.  The projector power
switch is...

Video 1
VIDEO
Bright |........................|
Tint |........................|
Color |........................|
Contr |........................|
Sharp |........................|
Language English
Image H Normal
V Normal
System
    
AUTO   NTSC   PAL    SECAM
RGB
Bright |........................|
Contr |........................|
     HPhase :
     HSize :
Image H Normal
V Normal
Language English
Figure 4-1. Video/RGB On-screen Menus
123ME Multimedia Projector MP8020
W 1996
Select Input: Press the...

133ME Multimedia Projector MP8020
W 1996
4-3. Memory Function
The MP8020 will retain all picture adjustment settings you make until you either change them again or return
all settings to the factory default. To return picture adjustments back to the factory settings, press the MENU
 button to display the on-screen menu and then press the RESET button
4-4. Inverting the Image
The image can be inverted for ceiling mounted applications.  Press the MENUbutton on the remote
control to display the on-screen...

143ME Multimedia Projector MP8020
W 1996
4-7. Video System
The MP8020 has an automatic video selection function that will choose the correct video system or you can
manually select the video system.
On the remote control, press the MENU 
 button to display the on-screen menu (Figure 4.1) and press the
VIDEO 
 button to display the Video 1 or Video 2 menu.  Use the TRACKBALL to move down the menu
to the System line (AUTO, NTSC, PAL, SECAM).  Use the TRACKBALL or press 
 or  to select either
AUTO (for...

Figure 5-1. Remote Buttons
153ME Multimedia Projector MP8020
W 1996
Section 5: Remote Control
5-1. How to Operate the Remote Control
The remote control keypad (Figure 5-1) has the same buttons as the projector control panel, plus additional
buttons to control different projector and mouse functions (mouse receiver must be connected).  To use the
remote control, aim the remote toward the projection screen and press the desired button.  The remote signal
will bounce off of the projection screen (Figure...

163ME Multimedia Projector MP8020
W 1996
When the projector is displaying a video or computer image, press the H/V button to switch to the
MENU mode and the LED will begin flashing.  Move the trackball left/right to adjust the image
horizontally or up/down to adjust the image vertically.  When changes are complete, press the H/V
button to return to the NORMAL mode.
Note
The LED will stop flashing and return the remote control transmitter to the NORMAL mode
after five seconds of inactivity.
Sizes the...

Figure 5-3. Mouse Buttons
Figure 5-4. Using the Remote Control
173ME Multimedia Projector MP8020
W 1996
Using the Mouse Buttons
The mouse receiver must be connected before the remote control buttons will operate the mouse functions.
See Mouse Receiver Connection.
Note
Remember to reboot the computer after the mouse receiver has been connected.
There are three mouse buttons L-Left, R-Right and DRAG and a TRACKBALL for controlling mouse
functions.  See Figure 5-3.  When the MENU button is in the normal...

183ME Multimedia Projector MP8020
W 1996
Section 6: Lamp Replacement
6-1. Metal Halide Projector Lamp
If the projected image appears dark or the LAMP indicator light comes on, the lamp may be getting old and in
need of replacement.
Under normal operating conditions, the lamp should last approximately 700 hours. However, after time the
lamp will slowly grow dimmer. For best results, replace the lamp after 700 hours of usage.
Note
The LAMP indicator will come on when the lamp becomes too hot. If this...