3M Micro Professional Projector Mpro110 Operators Manual

							3M
™
 Micro Professional Projector 
MPro110
Operator’s Guide
Guide de l’utilisateur
Bedienungsanleitung
Guía para el operador Guida utente
Gebruiksaanwijzing Användarmanual 用户指南
使用手冊
Projection Systems
3M Austin Center
6801 River Place Blvd.
Austin, T X 78726-9000
866-631-1656
www.3M.com/meetings
e-mail: meetings @ mmm.com Please recycle. Printed in Taiwan.
© 3M 2008. All rights reserved.
August 2008 78-6971-1437-5-B
3M is a trademark of 3M Company.
3M est une marque commerciale de 3M Company. 3M es una marca registrada de la Compañía 3M. 3M è un marchio commerciale 3M Company. 3M ist ein Warenzeichen der Firma 3M.
3M is een handelsmerk van 3M Company.
3M är ett varumärke tillhörande 3M Company.
3M
™ Micro Professional Projector  MPro110 
						

							3M™ Micro Professional Projector MPro110
 2 © 2008 3M. All Rights Reserved.
Operator’s 
GuideContents
Intended Use Statement  ........................................................................\
................. 3
Trademarks and Copyrights  ........................................................................\
............ 3
Safety Information  ........................................................................\
.......................... 3
Safety Labels  ........................................................................\
................................. 5
Package Contents  ........................................................................\
.......................... 7
Parts  ........................................................................\
............................................. 7
Getting Started  ........................................................................\
.............................. 8
Operating Instructions  ........................................................................\
.................. 10
Troubleshooting  ........................................................................\
........................... 13
Specifications  ........................................................................\
.............................. 14
Limited Warranty  ........................................................................\
.......................... 16
12044-PSD_78-6971-1437-5_MPro_Projector_Book.indb   28/21/08   4:48:24 PM 
						

							3M™ Micro Professional Projector MPro110
© 2008 3M. All Rights Reserved.
  3
Operator’s 
Guide
Intended Use Statement
The 3M™ Micro Professional Projector MPro110 is designed to operate with the 3M-specified 
battery and 3M battery charger and in a normal office and home environment.
10˚–30˚C ( 50˚–86˚F )
•	
10 –80% RH (without condensation)
•	
0 –1,829 m ( 0 – 6000' ) above sea level
•	
The ambient operating environment should be free of airborne smoke, grease, oil and other 
contaminants that can affect the operation or performance of the projector.
Use of this product in adverse conditions will void the product warranty.
Trademarks and Copyrights
3M is a trademark of 3M Company. 
VGA and XGA are trademarks of International Business Machines Corporation.
S-VGA is a registered trademark of the Video Electronics Standards Association.
No publication or commercial use may be made of this material without the express written 
permission of 3M.
Safety Information
Please read, understand, and follow all safety information contained in these instructions prior 
to the use of this projector. Retain these instructions for future reference.
Explanation of Signal Word Consequences
m Warning:Indicates a potentially hazardous situation, which, if not avoided, could result in 
death or serious injury and/or property damage.
m Caution:Indicates a potentially hazardous situation, which, if not avoided, may result in minor 
or moderate injury and/or property damage.
12044-PSD_78-6971-1437-5_MPro_Projector_Book.indb   38/21/08   4:48:24 PM 
						

							3M™ Micro Professional Projector MPro110
 4 © 2008 3M. All Rights Reserved.
Operator’s 
Guidem Warning
To reduce the risk associated with hazardous voltage :
Do not modify this product in any way. Use only 3M approved replacement 
•	
components.
Do not attempt to service this projector other than battery replacement. There are 
•	
no user serviceable parts other than the battery. Service to be performed only by a 
3M-authorized service provider using 3M-approved system components.
Do not use the wall power supply in a wet environment.
•	
Do not use with a damaged wall power supply. Replace damaged part prior to use.
•	
To reduce the risk associated with fire and explosion :
* Do not immerse the projector or battery in any liquid or allow either to get wet.
•	
Use only wall power supply and Li-Ion battery provided. 
•	
Do not disassemble, short or expose the battery to high temperature.
•	
Do not overcharge or rapidly discharge the battery.
•	
Do not dispose of the battery by incineration or fire.
•	
Do not operate this projector in any environment above 100°F ( 38°C ).
•	
Do not expose the projector or battery to direct sunlight in a closed space such as 
•	
a vehicle.
To reduce the risks associated with driver distraction in a moving motor vehicle : Do not use this projector in a moving motor vehicle.
•	
m Caution
To reduce the risk associated with environmental contamination :
Dispose of all system components in accordance with applicable government 
•	
regulations.
To reduce the risks associated with LED visible bright light : Do not stare directly into the LED light beam.
•	
To reduce the risks associated with tripping and falling :
Position the charging cord and data cables so that they can not be tripped over.
•	
SAVE THESE INSTRUCTIONS
12044-PSD_78-6971-1437-5_MPro_Projector_Book.indb   48/21/08   4:48:25 PM 
						

							3M™ Micro Professional Projector MPro110
© 2008 3M. All Rights Reserved.
  5
Operator’s 
Guide
Safety Labels
CLASS 1 LED PRODUCT
FCC STATEMENT - CLASS B
This equipment generates, uses and can radiate radio frequency energy, and if not installed 
and used in accordance with the instruction manual may cause interference to radio 
communications. It has been tested and found to comply with the limits for a Class “B” 
computing device pursuant to Subpart B of Part 15 of the FCC Rules, which are designed 
to provide reasonable protection against such interference when operated in a residential 
installation. However, there is no guarantee that interference will not occur in a particular 
installation. If this equipment does cause harmful interference to radio or television reception, 
which can be determined by turning the equipment off and on, the user is encouraged to try to 
correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
•	
Increase the separation between the equipment and receiver.
•	
Connect the equipment into an outlet on a circuit different from that to which the receiver 
•	
is connected.
Consult the dealer or an experienced radio / T V technician for help.
•	
NOTICE:  This Class B digital apparatus meets all requirements of the Canadian Interference-
Causing Equipment Regulations.
Cet appareil numérique de la classe B respecte toutes les exigences du Règlement sur le 
matériel brouilleur du Canada.
12044-PSD_78-6971-1437-5_MPro_Projector_Book.indb   58/21/08   4:48:26 PM 
						

							3M™ Micro Professional Projector MPro110
 6 © 2008 3M. All Rights Reserved.
Operator’s 
GuideINSTRUCTIONS TO USERS: This equipment complies with the requirements of FCC 
equipment provided that the following conditions are met. The cables may have to be used 
with the core set to the projector side. Use the cables which are included with the projector 
or specified.
Note : Changes or modifications not expressly approved by the party responsible for 
compliance could void the user’s authority to operate the equipment.
CE Statement
ElectroMagnectic Compatibility Statement : Meets 2004/108/ EC Directive
Low Voltage Directive : Meets 2006-95-EC Directive.
WEEE Statement
The following information is only for EU-members States:
The mark shown to the right is in compliance with Waste Electrical 
and Electronic Equipment Directive 2002/96/ EC ( WEEE). The 
mark indicates the requirement NOT to dispose the equipment as 
unsorted municipal waste, but use the return and collection systems 
according to local law.
RoHS Statement
3M Projection Systems can provide RoHS certification for products meeting the RoHS 
directive.
1 
European ( EU ) Restriction of Hazardous Substances ( RoHS ) Directive, 2002/95/ EC,
1 RoHS compliant means that the product or part does not contain any of the substances in excess of the 
following maximum concentration values in any homogeneous material, unless the substance is in an 
application that is exempt under RoHS, as amended:(a) 0.1% (by weight) for lead, mercury, hexavalent 
chromium, polybrominated biphenyls or polybrominated diphenyl ethers; or (b) 0.01% (by weight) for 
cadmium. This information represents 3M’s knowledge and belief, which may be based on information 
provided by third party suppliers to 3M.
12044-PSD_78-6971-1437-5_MPro_Projector_Book.indb   68/21/08   4:48:26 PM 
						

							3M™ Micro Professional Projector MPro110
© 2008 3M. All Rights Reserved.
  7
Operator’s 
Guide
Package Contents
Projector
1 
Battery Charger/AC Adapter
2 
Video Cable
3 
VGA Cable
4 
Battery
5 
RCA Adapter
6 
Note: In some regions, the battery 
charger/AC adapter will come with 
an outlet adapter. 
1 2
3 4
5 6
Parts
Focus Wheel
1 
Lens
2 
Power On /Off
3 
Video IN
4 
VGA IN
5 
Power and Charge LEDs
6 
DC Power IN 
7 
457
6
1
3
2
12044-PSD_78-6971-1437-5_MPro_Projector_Book.indb   78/21/08   4:48:27 PM 
						

							3M™ Micro Professional Projector MPro110
 8 © 2008 3M. All Rights Reserved.
Operator’s 
GuideGetting Started
Install Battery
The 3M MPro110 comes with a rechargeable Lithium-Ion ( Li-Ion) battery. The battery should 
be charged before using the projector with the battery.
Important Note: Switch projector OFF and disconnect all cables before installing the battery. 
Use only the 3M-specified battery:  78-6969-9974-3.
To install the battery: slide the back cover off, insert the battery, and reinstall the cover.
12044-PSD_78-6971-1437-5_MPro_Projector_Book.indb   88/21/08   4:48:27 PM 
						

							3M™ Micro Professional Projector MPro110
© 2008 3M. All Rights Reserved.
  9
Operator’s 
Guide
Charge the Battery
The 3M MPro110 comes with a battery charger/AC adapter. Use the battery charger/AC 
adapter to power the projector when the battery is not charged or installed and to charge the 
battery. When the battery needs charging, the image will turn black and the Power LED will 
flash red. 
To charge the battery: (1) Turn the power switch OFF. (2) Connect the battery charger/AC 
adapter to the projector’s DC in. ( 3 ) Plug the battery charger/AC adapter into an electrical 
outlet. (4) The charge LED lights orange while the battery is charging. The battery will be fully 
charged in about 2 hours. ( 5) Once charging is complete, the charge LED will turn off.
Note: The battery will not charge when the power switch is in the ON position. Turn the 
power switch OFF to charge battery.
12044-PSD_78-6971-1437-5_MPro_Projector_Book.indb   98/21/08   4:48:27 PM 
						

							3M™ Micro Professional Projector MPro110
 10 © 2008 3M. All Rights Reserved.
Operator’s 
GuideOperating Instructions
Connecting to a Video Source
There are many devices that output video signals: digital cameras, video phones, and portable 
video players. The 3M MPro110 can project the video from these devices using its video port. 
(1) Connect the included video cable to the projector (2) Connect the video cable to the video 
source’s cable or the video output port.
NOTE: If the two cables have the same connector on the end, use the RCA adapter to 
connect the two cables.
12044-PSD_78-6971-1437-5_MPro_Projector_Book.indb   108/21/08   4:48:28 PM