3D Perception CompactViewn Sx25+i User Manual
Have a look at the manual 3D Perception CompactViewn Sx25+i User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 21 3D Perception manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
2005 3D perception AS All rights reserved.
The copyright of this document is the property of 3 D perception AS. The document is supplied on the
express terms that it is to be treated as confident ial. No part of this document may be reproduced or
transmitted in any form or by any means, electronic or mechanical for any purpose, without the
express written permission of 3D perception AS. The information in this document is subject to
change without notice and is provided ‘AS IS’.
COMPACTVIEW SX25+
USER MANUAL
3D perception COMPACTVIEW SX25+
Revision 3 User Manual
ii
DOCUMENT STATUS
Revision Month Year Paragraph(s) Prepared by Description of
Change
1 October 2004 All A F Rotheram Initial release
2 November 2004 16 A F Rotheram Reset
3 September 2005 22 & 24 A F Rotheram Parts list
USA address
3D perception COMPACTVIEW SX25+ Revision 3 User Manual iii T ABLE OF CONTENTS 1. B EFORE YOU START................................................... .............................................................. 1 1.1 Accessories .................................... ............................................................................... 1 1.2 Cables ......................................... .................................................................................. 1 1.3 Other accessories .............................. ............................................................................ 1 2. A CCESSORIES................................................... ....................................................................... 2 3. I NTRODUCTION................................................... ..................................................................... 3 4. S AFETY & WARNINGS................................................... .......................................................... 4 4.1 Safety ......................................... ................................................................................... 4 4.2 Warnings ....................................... ................................................................................ 4 4.3 Mercury Vapour ................................. .......................................................................... 5 4.4 Remote Control Warning......................... ..................................................................... 6 5. B EFORE SET-UP AND USE................................................... ................................................... .. 7 6. O VERVIEW................................................... ................................................... ......................... 8 7. K EYPAD................................................... ................................................................................ 9 8. S TATUS................................................... ............................................................................... 10 9. R EMOTE CONTROL................................................... ............................................................. 11 10. C ONNECTOR PANEL................................................... ............................................................ 13 11. S ET-UP................................................... ................................................................................ 14 11.1 Set-up computer ............................... ........................................................................... 14 11.2 Set-up Video .................................. ............................................................................. 15 12. GCM - G EOMETRY CORRECTION MODULE................................................... ........................ 16 12.1 Connecting the CompactView SX25+I ............. ......................................................... 16
3D perception COMPACTVIEW SX25+ Revision 3 User Manual iv 12.2 Connecting the CompactView SX25+E ............. ........................................................ 17 13. F OCUS AND ZOOM................................................... .............................................................. 18 13.1 Focus......................................... .................................................................................. 18 13.2 Zoom.......................................... ................................................................................. 18 14. M OUNTING THE PROJECTOR................................................... ............................................... 19 14.1 To a Ceiling Mount............................ ......................................................................... 19 14.2 To a Tabletop ................................. ............................................................................. 20 15. U SING THE PROJECTOR................................................... ....................................................... 21 16. M ENU SYSTEM................................................... ................................................................... 22 16.1 Picture Sub-menu .............................. ......................................................................... 23 16.2 Dynamic Sub-menu .............................. ...................................................................... 24 16.3 Advanced Sub-menu............................. ...................................................................... 25 16.4 Set Up Sub-menu ............................... ......................................................................... 26 16.5 Utilities Sub-menu ............................ .......................................................................... 27 16.6 Control Sub-menu.............................. ......................................................................... 28 17. M AINTENANCE................................................... ................................................................... 29 18. L AMP REPLACEMENT................................................... ......................................................... 30 18.1 Remove old lamp ............................... ......................................................................... 30 18.2 Insert New Lamp ............................... ......................................................................... 31 19. S ERVICE INFORMATION................................................... ...................................................... 33 20. T ECHNICAL DATA................................................... ............................................................... 34 20.1 Projector Specifications ...................... ........................................................................ 34 20.2 GCM Specifications ............................ ....................................................................... 35 21. C OVERS................................................... .............................................................................. 36 21.1 Cable cover ................................... .............................................................................. 36 21.2 Airflow cover ................................. ............................................................................. 36
3D perception COMPACTVIEW SX25+
Revision 3 User Manual
v
22. PARTS LIST...................................................
......................................................................... 37
22.1 Main products ................................. ............................................................................ 37
22.2 Spare parts ................................... ............................................................................... 37
23. L
IMITED WARRANTY, ‘FCC STATEMENT’ AND ‘TRADEMARKS COPYRIGHT’ ....................... 38
24. C
ONTACT US................................................... ....................................................................... 40
3D perception COMPACTVIEW SX25+ Revision 3 User Manual 1 1. BEFORE YOU START Thank you for choosing a 3D perception COMPACTVIEW SX25+ projector 1.1 Accessories Please take a few minutes to ensure that your COMPACTVIEW SX25+ projector pack contains all the necessary parts as listed on the Accessories Pa ge. 1.2 Cables Please take a few minutes to make sure that your COMPACTVIEW SX25+ projector pack contains all the necessary cables, as listed on the Accessor ies Page. 1.3 Other accessories Please refer to our website at www.3d-perception.com
3D perception COMPACTVIEW SX25+
Revision 3 User Manual
2
2. ACCESSORIES
COMPACTVIEW SX25+ PROJECTOR REMOTE CONTROL AND BATTERIES
M
ODELS: SX25+I
SX25+E
CABLE COVER
AIRFLOW COVER
User Manual
Cables
VGA male Blue - VGA male Blue, 2m
DVI-I male White - DVI–I male White, 2m
A/V Cable 3 x Phono – Phono + 3,3mm stereo jack, 2m
S-Video Mini DIN 4 pin male - Mini DIN 4 pin male, 2m
Sound Cable 3,5mm stereo jack - 3,5mm stereo jack, 2m
USB A – USB B, 2m
Communication Cable 6’ spiral with RJ12 connectors
Power cord, 3m (European)
Power cord, 3m (US)
3D perception COMPACTVIEW SX25+ Revision 3 User Manual 3 3. INTRODUCTION The COMPACTVIEW SX25+ projector is the ultimate in high-resolution projec tors when projection on to flat, curved or double curved screens with mu ltiple projectors is the requirement. The C OMPACTVIEW SX25+ projector is compatible with most data and video so urces, both analogue and digital, and provides the user with ou tstanding features such as: · 1400x1050 pixel SX25GA DLP™ technology. Single chip DMD™ with DarkChip2™ technology by Texas Instruments® · High resolution · High brightness · High contrast · Geometry correction functionality · Edge blending functionality · Faroudja DCDi™ · Lamp ECO mode · Variable lamp power · Multiple lens options · Six video and graphics inputs · Compact, low weight · Low noise · Desktop and ceiling-mountable This user guide contains important information abou t safety precautions and the set-up and use of the projector. Please read the manual carefully before you operate the projector. The specifications and functionality of the product may change without prior notice.
3D perception COMPACTVIEW SX25+ Revision 3 User Manual 4 4. SAFETY & WARNINGS This user manual contains important information reg arding safety precautions and the set-up and use of the projector. Please read the manual ca refully before you operate the projector. 4.1 Safety This device complies with relevant safety regulations for data processing equipment for use in an office environment. Before using the projector f or the first time, please read the safety and warning instructions thoroughly. 4.2 Warnings Always use 3-prong power cord to ensure proper grou nding of the unit. Never use 2-prong power cords, this is dangerous and could lead to el ectrical shock. Never open the unit. The projector contains no user serviceable parts. Refer all repairs to qualified personnel only. Make sure that no objects enter into the vents and openings of the unit. Do not spill any liquids on the projector or into t he vents or openings of the unit. Always remove the lens cap before switching on the projector. If the lens cap is not removed, it may melt due to the high energy light emitted throu gh the lens. Melting the lens cap may permanently damage the surface of the projection le ns. Do not look into the projection lens when the proje ctor is switched on. The strong light may permanently damage your eyesight. Do not look into the laser beam when activated on t he remote control. Laser light may permanently damage your eyesight. Do not point the laser beam at people. Only place the projector on a stable surface, or mo unt it securely using an approved ceiling- mount. Do not drop the projector. Always allow sufficient airflow through the project or. Never block any of the air vents. Never cover the unit in any way while it is operation. Al low sufficient distance to walls and ceilings in order to avoid overheating. Minimum safety distance to any side of the unit is 50 cm (20) in any direction. CAUTION ! Hot air is exhausted from the side vent. Do not p lace objects that are sensitive to heat nearer than 50cm (20) to the exhaust vent.
3D perception COMPACTVIEW SX25+ Revision 3 User Manual 5 The projector is designed for indoor use only. Neve r operate the unit outdoors. Do not operate the projector outside its temperatur e and humidity specifications, as this may result in overheating and malfunctioning. Only connect the projector to signal sources and vo ltages as described in the technical specification chapter. Connecting to unspecified si gnal sources or voltages may lead to malfunction and permanent damage of the unit. Allow the unit to cool down for 60 minutes before l amp change. 4.3 Mercury Vapour The following information and warnings about potent ial health issues relate to mercury vapour. This projector is using an extremely bright UHP™ la mp for illumination to attain the desired high brightness image. This technology is similar to other high-pressure d ischarge lamps that are extensively used in cars, street lights and other lighting appliances t oday. These lamps, like fluorescent lighting, contain small amounts of mercury. The amount of mer cury present in a lamp is far below the limits of danger set by the authorities. It is very important that lamps containing mercury are treated properly to minimize potential health hazards. The UHP™ lamp, like any other high brightness proje ctor lamp, is under high-pressure when operating. While the lamp and the projector are car efully designed to minimize the probability of lamp rupture, the lamp may break while operating an d small amounts of mercury vapor may be emitted from the projector. The probability of ruptu re increases when the lamp reaches its nominal life. It is therefore highly recommended th at the lamp is replaced when the rated lifetime is reached. As a general precaution, secure good ventilation in the room when operating the projector. If lamp rupture occurs, evacuate the room and secure g ood ventilation. Children and pregnant women in particular should leave the room. When replacing a worn lamp, dispose of the used lam p carefully by proper recycling. Mercury is a naturally occurring, stable metallic e lement that may pose a safety risk to people under certain conditions. According to the Public H ealth Statement for Mercury published by the Agency for Toxic Substances and Disease Registry (A TSDR, part of the United States Public Health Service), the brain, central nervous system and kidneys are sensitive to the effects of mercury, and permanent damage can occur at sufficiently high levels of exposure.