3D Perception CompactViewn Sx25+i User Manual

3D perception             COMPACTVIEW SX25+ 
Revision 3                    User Manual   
 
  6 
 
 
Acute exposure to high concentrations of mercury va
por can cause conditions such as lung and 
airway irritation, tightness in the chest, a burnin g sensation in the lungs, coughing, nausea, 
vomiting and diarrhea. Children and fetuses are par ticularly sensitive to the harmful effects of 
metallic mercury to the nervous system.     
Seek medical attention if any of the above symptoms  are experienced or...

3D perception             COMPACTVIEW SX25+ 
Revision 3                    User Manual   
 
  7 
 
 
5.  BEFORE SET-UP AND USE 
Be sure you have read the Safety and Warnings chapt
er in this manual before proceeding with 
the set-up and use of the  C
OMPACTVIEW SX25+ projector. 
  
Unpack the supplied parts and familiarize yourself  with the various components. 
  
Remove the lens cap from the projection lens. If yo u switch the projector on with the lens cap in 
place, the lens cap may melt, damaging...

3D perception             COMPACTVIEW SX25+ 
Revision 3                    User Manual   
 
  8 
 
 
6.  OVERVIEW  
A.  Focus ring 
H. Lamp house 
B.  Zoom ring (optional lens) 
I. Adjustable foot 
C.  IR sensor  J. Foot release 
D.  Ventilation K. Security lock 
E. Keypad 
L. Ceiling Mount 
F. Connector panel 
M. Control Chain In 
G.
 Power connector N. Control Chain Out 
   
  
 
 
 
                

3D perception             COMPACTVIEW SX25+ 
Revision 3                    User Manual   
 
  9 
 
 
7.  KEYPAD 
POWER   
Switch the projector on and off.   
AUTO  
Automatically detect and synchronize to the signal 
source selected. 
  
MENU  
Activate the menu system. Use the four arrow keys t o navigate and 
 to activate. 
  
SELECT/KEYSTONE
  
Select menu option when the menu system is activate d. When the menu system is not in use 
the menu button will activate the keystone correcti on. Use the four...

3D perception             COMPACTVIEW SX25+ 
Revision 3                    User Manual   
 
  10 
 
 
8.  STATUS 
GREEN LIGHT  
A permanent GREEN light indicates the  
projector is turned on
 
  
 
YELLOW LIGHT  
A permanent YELLOW light indicates the  
projector is either switched off or is in stand-by  
mode.
 
 
 
YELLOW LIGHT FLASHING   
A flashing yellow light indicates wait. The  
yellow light will flash for a period of 10 -15  
seconds after the power cord is connected and  
for a period of 45...

3D perception             COMPACTVIEW SX25+ 
Revision 3                    User Manual   
 
  11 
 
 
9.  REMOTE CONTROL 
The remote control allows flexible access to the pr
ojector settings, either through direct keys, or 
through the menu system. The remote control can be u sed to emulate the computer mouse 
through the USB interface. 
 
POWER  
Switches the projector between on and standby modes .
 
  
AUTO  
Adjusting the projector to display a correct image, 
including position, width, height,...

3D perception             COMPACTVIEW SX25+ 
Revision 3                    User Manual   
 
  12 
 
 
 
BRIGHT  
Adjusts image brightness from dark to bright    
CONTRAST  
Adjusts the image contrast from soft to hard    
COLOR 
Adjusts the color of the image from pale to saturat
ed 
  
VOLUME  
Adjusts the sound volume   
ASPECT  
Cycles through the aspect ratios available with the  
current source    
MENU  
Toggles the menu system on and off    
TRACKBALL  
When USB cable is connected between PC and...

3D perception             COMPACTVIEW SX25+ 
Revision 3                    User Manual   
 
  13 
 
 
10.  CONNECTOR PANEL 
 
 
 
A . Component video In (YPbPr). Used for 
high quality video reproduction.   
B . Super video In. Used for improved 
quality video.   
C . Composite video In. Used for standard 
video quality.   
D . DVI - Digital RGB. For a low noise 
computer and video image.   
E . Monitor VGA out: Allows for connection 
to local VGA monitor or daisy-chaining of  
several projectors using...

3D perception             COMPACTVIEW SX25+ 
Revision 3                    User Manual   
 
  14 
 
 
11.  SET-UP  
Before any set-up, switch off all equipment.   
11.1  Set-up computer 
The projector may be connected to up to three compu
ter sources simultaneously, using the 
VGA and DVI inputs.    
The VGA interface is analog and may cause some nois e in the projected image, depending on 
the signal quality from the VGA graphics card in th e computer and cabling. 
  
The DVI (Digital Visual Interface)...

3D perception             COMPACTVIEW SX25+ 
Revision 3                    User Manual   
 
  15 
 
 
11.2  Set-up Video 
Three video sources may be connected, using the YPb
Pr (component), S-VIDEO (super video) 
and VIDEO (composite video) inputs.    
Component video will display more detailed images.  Composite video yields images with less 
detail.   
In addition, the DVI-D input can be used with video  sources (DVD player fitted with an HDCPTM 
compliant DVI or HDMI connector) for a pure digital...