3D Perception COMPACTVIEW Hmr 15 User Manual

3D perception   COMPACTVIEW HMR-15 
Revision 1                    User Manual   
 
 7 
 
 
5.  SET-UP  
The first time the 
COMPACTVIEW 
HMR-15 is switched on, a 
message will appear on the  
screen requesting a valid license 
key (activation code) for the  
projector. The message box will  
also indicate the following details  
for the projector:     Address 
Software version  
IP address 
 
  
The following procedures now require completion bef ore the C
OMPACTVIEW HMR-15  projector is 
ready for use....

3D perception   COMPACTVIEW HMR-15 
Revision 1                    User Manual   
 
 8 
 
 
    
or Wireless LAN (C) 
 
C
  
5.2.1  Connecting multiple projectors 
Multiple projectors may be connected together in a 
‘daisy chain’ by one of the following 
methods:- 
1.  By cable  
2.  By LAN  
3.  By WLAN (Optional) 
  
5.2.1.1  By cable  
Connecting multiple projectors  
together by cable is achieved by  
using the input and output RS232  
ports on each projector. The first  
projector is connected to the...

3D perception   COMPACTVIEW HMR-15 
Revision 1                    User Manual   
 
 9 
 
 
5.2.1.2  By LAN    
Connect all projectors via the LAN  
port (C) to the same LAN as the  
control PC (running  
CompactDesigner or 
CompactControl) is connected. 
C
 
 
5.2.1.3  By WLAN (Optional)    
Only applicable if Optional module 
KK700 has been purchased 
  
To be developed 
D
 
 
5.3  Set functionality codes for projectors 
Complete the following steps within CompactControl  for each COMPACTVIEW HMR-15...

3D perception   COMPACTVIEW HMR-15 
Revision 1                    User Manual   
 
 10 
 
 
Step 1 
 
    
Select Projectors on the drop-down menu  
under Maintenance under the main File  
menu 
 
  
Step 2  
    
On the Projector maintenance dialogue box click  
right on the desired projector and select  
Properties from the drop-down menu.   
NOTE : The address of all CompactView HMR-15 
projectors will commence with the characters CH. 
 
     

3D perception   COMPACTVIEW HMR-15 
Revision 1                    User Manual   
 
 11 
 
 
Step 3      
If the IP address and Subnet mask are set  
automatically (default option), the DHCP  
standard protocol will be used to assign the 
address.    
If the IP address and Subnet mask are to be  
set manually, it is recommended that users  
consult with their own network administrator.  
 
  
Step 4    
Only applicable if Optional module 
KK700 has 
been purchased
 
  
WLAN  
(To be developed) 
 
     

3D perception   COMPACTVIEW HMR-15 
Revision 1                    User Manual   
 
 12 
 
 
Step 5   
Check the Lamp time is indicated showing the 
projector is switched on.   
NOTE: This dialogue page can also used to 
reset the lamp time to zero in the event that 
the lamp unit has to be replaced. 
 
  
Step 6    
Enter the unique Security key for the projector. 
 
  
(The security key for each projector can be 
obtained by e-mail from 3D perception. Send  
the projector address [CH….] of each...

3D perception   COMPACTVIEW HMR-15 
Revision 1                    User Manual   
 
 13 
 
 
Step 7   
CW (Colour Wheel)   
This dialogue page will indicate the colour  
wheel index delay.   
NOTE:  
1.  Changing the colour wheel index 
delay will not improve  or adjust the  
colour on the projector. 
2.  Changing the colour wheel index  delay should only be performed by a  
qualified technician. 
 
 
5.4  Set computer source for projectors 
The projector may be connected to up to 3 computer  sources...

3D perception   COMPACTVIEW HMR-15 
Revision 1                    User Manual   
 
 14 
 
 
6.  FOCUS AND ZOOM 
 
A
B
 
 
6.1  Focus 
Turn the Focus ring (A) on the projection lens to ge t a correctly focused image. 
 
6.2  Zoom 
Turn the Zoom ring (B) on the projection lens to zoo m In and Out. (This is only available on the 
optional intermittent and long throw lens.)    
 If the desired image size cannot be achieved by ad justing the zoom ring, relocate the projector 
nearer or farther away from the...

3D perception   COMPACTVIEW HMR-15 
Revision 1                    User Manual   
 
 15 
 
 
7.  MOUNTING THE PROJECTOR 
7.1  To a Ceiling Mount 
The projector can be ceiling mounted using any appr
oved UL tested/listed ceiling mount fixture 
with a minimum weight capacity of 12 kg (26 lbs).    
The ceiling mount obtainable through 3D perception  (as illustrated below) is only approved for 
C
OMPACTVIEW HMR-15  projectors. 
  
For proper ventilation, the minimum distance from t he ceiling/rear wall should...

3D perception   COMPACTVIEW HMR-15 
Revision 1                    User Manual   
 
 16 
 
 
7.2  To a Tabletop 
  
Although the projector is not equipped with adjusta
ble legs it may be sited directly onto a 
tabletop, however, this is only recommended for tem porary use or for demonstration purposes. 
It is not recommended for permanent installation su ch as in a simulator.