59
INSTRUCTIONS FOR USE
BEFORE USING THE DISHWASHER/
CONNECTIONS
ELECTRICAL CONNECTION
PRECAUTIONS AND GENERAL 
RECOMMENDATIONS
HOW TO FILL THE SALT CONTAINER
HOW TO FILL THE RINSE AID DISPENSER
HOW TO FILL THE DETERGENT DISPENSER
CARE AND MAINTENANCE
 
                                            

                                                    GB 
-1-
Chart
START
DELAY
optionMULTI
ZONE
optionPOWER
CLEAN
optionON/OFF
BUTTON PROGRAMME
SELECTOR
KNOB
(see “Table of 
programmes” 
below)START BUTTON
The indicator lights up during operation, flashes when a fault occurs, and goes off 
at the end of the programme.
START BUTTON RESET FUNCTION:
Press this button for at least 2 seconds; the selected programme and options will 
be cancelled. Main failure displays (repeated flashing of the START indicator lamp) 
can be cancelled by RESETTING. Detailed...
                                            

                                                    GB 
-1-
Chart
PROGRAM SELECTION 
BUTTON
Push “Programs” button 
(repeatedly) until the indicator 
of the required program lights 
up (see “Table of programs” 
below).
(see at right for options description)
START/RESUME BUTTON
Push this button to start the selected program: the 
indicator lights up and goes off at the end of the 
program. 
When the door is opened during a washing cycle, 
the cycle is temporarily paused: the Start indicator 
blinks. To resume the cycle close the door and 
push Start button...
                                            

                                                    GB 
-1-
Chart
PROGRAMME
SELECTOR
KNOB
(see “Table of 
programmes” 
below).START
DELAY
optionHALF
LOAD
optionANTI-
BACTERIAL
RINSE
optionON/OFF
BUTTON START BUTTON
The indicator lights up during operation, flashes when a fault occurs, and goes off 
at the end of the programme.
START BUTTON RESET FUNCTION:
Press this button for at least 2 seconds; the selected programme and options will be 
cancelled. Main failure displays (repeated flashing of the START indicator lamp) can be 
cancelled by RESETTING....
                                            

                                                    59
INSTRUCTIONS FOR USE
BEFORE USING THE DISHWASHER/
CONNECTIONS
ELECTRICAL CONNECTION
PRECAUTIONS AND GENERAL 
RECOMMENDATIONS
HOW TO FILL THE SALT CONTAINER
HOW TO FILL THE RINSE AID DISPENSER
HOW TO FILL THE DETERGENT DISPENSER
CARE AND MAINTENANCE
 
                                            

                                                    GB 
-1-
Chart
START
DELAY
optionMULTI
ZONE
option POWER
CLEAN
optionON/OFF
BUTTON PROGRAMME
SELECTION
BUTTON
(see “Table of 
programmes” 
below).START BUTTON
The indicator lights up during operation, flashes when a fault occurs, 
and goes off at the end of the programme.
START BUTTON RESET FUNCTION:
Press this button for at least 2 seconds; the selected programme and options will be 
cancelled. Main failure displays (repeated flashing of the START indicator lamp) can be 
cancelled by RESETTING. Detailed...
                                            

                                                    GB 
-1-
Chart
START
DELAY
optionMULTI
ZONE
option POWER
CLEAN
optionON/OFF
BUTTON PROGRAMME
SELECTION
BUTTON
(see “Table of 
programmes” 
below).START BUTTON
The indicator lights up during operation, flashes when a fault occurs, 
and goes off at the end of the programme.
START BUTTON RESET FUNCTION:
Press this button for at least 2 seconds; the selected programme and options will be 
cancelled. Main failure displays (repeated flashing of the START indicator lamp) can be 
cancelled by RESETTING. Detailed...
                                            

                                                    GB 
-1-
Chart
PROGRAM SELECTION 
BUTTON
Push “Programs” button 
(repeatedly) until the indicator 
of the required program lights 
up (see “Table of programs” 
below).
(see at right for options description)
START/RESUME BUTTON
Push this button to start the selected program: the 
indicator lights up and goes off at the end of the 
program. 
When the door is opened during a washing cycle, 
the cycle is temporarily paused: the Start indicator 
blinks. To resume the cycle close the door and 
push Start button...
                                            

                                                    WH/II/FD/GB
How to use the appliance
Further indications are given in the single chapters and in the user instructions.
Press the 
ON button.
(The first time you use the appliance 
and when using a different type of 
detergent)
1. Select the third programme from the 
top in the relative table.
2. Press the Start button for about 7 
seconds until the display changes.
3. Select the required detergent with the 
Start button: “3h” = 2in1, “6h” = 3in1, “9h” = All in 1, all three LEDs 
on = soap powder...
                                            

                                                    59
INSTRUCTIONS FOR USE
BEFORE USING THE DISHWASHER/
CONNECTIONS
ELECTRICAL CONNECTION
PRECAUTIONS AND GENERAL 
RECOMMENDATIONS
HOW TO FILL THE SALT CONTAINER
HOW TO FILL THE RINSE AID DISPENSER
HOW TO FILL THE DETERGENT DISPENSER
CARE AND MAINTENANCE
 
                                            

                                                    GB 
-1-
Chart
PROGRAM SELECTION 
BUTTON
Push “Programs” button 
(repeatedly) until the indicator 
of the required program lights 
up (see “Table of programs” 
below).
START/RESUME BUTTON
Push this button to start the selected program: the 
indicator lights up and goes off at the end of the program. 
When the door is opened during a washing cycle, the 
cycle is temporarily paused: the Start indicator blinks. 
To resume the cycle push Start button and close 
the door within 3 seconds.
CANCEL/OFF BUTTON...
                                            

                                                    GB 
-1-
Chart
(see at right for options description)
PROGRAM SELECTION 
BUTTON
Push “Programs” button 
(repeatedly) until the indicator 
of the required program lights 
up (see “Table of programs” 
below).
START/RESUME BUTTON
Push this button to start the selected program: the 
indicator lights up and goes off at the end of the 
program. When the door is opened during a 
washing cycle, the cycle is temporarily paused: the 
Start indicator blinks. 
To resume the cycle push the Start button and 
close the...
                                            

                                                    59
INSTRUCTIONS FOR USE
BEFORE USING THE DISHWASHER/
CONNECTIONS
ELECTRICAL CONNECTION
PRECAUTIONS AND GENERAL 
RECOMMENDATIONS
HOW TO FILL THE SALT CONTAINER
HOW TO FILL THE RINSE AID DISPENSER
HOW TO FILL THE DETERGENT DISPENSER
CARE AND MAINTENANCE
 
                                            

                                                    GB 
-1-
Chart
PROGRAM SELECTION 
BUTTON
Push “Programs” button 
(repeatedly) until the indicator 
of the required program lights 
up (see “Table of programs” 
below).
(see at right for options description)
START/RESUME BUTTON
Push this button to start the selected program: the 
indicator lights up and goes off at the end of the program. 
When the door is opened during a washing cycle, the 
cycle is temporarily paused: the Start indicator blinks.
To resume the cycle push Start button and close 
the door...
                                            

                                                    GB 
-1-
Chart
PROGRAMME SELECTION BUTTON
Press button “P” (repeatedly) until the indicator of the required programme lights 
up (see “Table of programmes” below).
ON
BUTTON
OFF
BUTTON
START BUTTON
The indicator lights up during operation, flashes when a fault occurs and goes off at 
the end of the programme. 
START BUTTON RESET FUNCTION
Press this button for at least 2 seconds; the selected programme and options are 
cancelled. Main failure displays (repeated flashing of the START indicator lamp) can be...
                                            

                                                    GB -1-
Chart
PROGRAM SELECTION 
BUTTON
Push “Programs” button 
(repeatedly) until the indicator 
of the required program lights 
up (see “Table of programs” 
below).
START/RESUME BUTTON
Push this button to start the selected program: the 
indicator lights up and goes  off at the end of the 
program. When the door is opened during a 
washing cycle, the cycle is temporarily paused:  the 
Start indicator blinks. 
To resume the cycle push the Start butto n and 
close the door within 3 seconds.
CANCEL/OFF...