The manufacturer intends that this game is to be operated for amusement purposes only and not in contravention 
of any federal, state or local law or regulation of the United States or any foreign country governing gaming 
devices. All operators of this game are responsible for its operation in accordance with such laws and regulations. 
The manufacturers factory settings for this game may require adjustment in order to comply with laws applicable 
in an operators specific jurisdiction. It is the...
                                            

                                                    midway amusement games llc
3401 north california avenue chicago, illinois 60618-5899
http://www.midway.com
16-11166
Manual Amendment
These changes apply to Touchmaster Infinity manual 16-60068.2-101. In some cases part numbers have 
changed or were in error. In other cases, part descriptions do not appear in existing manual at all.
MARS DBV SETTING (A-E2411U5E)
Page No. Part Description Correct Part Number
Service - 9 Touchscreen Replacement See enclosed sheet 16-11151
Parts - 2 Cabinet Assembly (Rear...
                                            

                                                    midway amusement games, llc
3401 north california avenue chicago, illinois 60618 usa
http://www.midwaygames.com
MARCH 2000
16-11151
TOUCHSCREEN REPLACEMENT
FOR INFINITY
® COUNTERTOP MODELS
Access Touchscreen
1. Turn off AC power. Unplug line cord. 
Refer to original manual for details or 
illustrations on any of the following 
instructions.
2.
5($5 225Insert key into Rear 
Door and turn 90 degrees clockwise to 
unlock. Remove two screws securing 
door. Swing door on hinge, remove, and 
set aside.
3.
723...
                                            

                                                    JANUARY 2000 
16-60091-101 
Operations Manual Includes 
Setup and Safety • Service  System  Parts  Wiring  Troubleshooting 
 
The manufacturer intends that this game is to be operated for amusement purposes only and not in contravention of any federal, 
state or local law or regulation of the United States or any foreign country governing gaming devices. All operators of this game are 
responsible for its operation in accordance with such laws and regulations. The manufacturer’s factory settings for...
                                            

                                                    Should you encounter a symptom of No Touchscreen Response on your Infinity, 
measure the resistance between pins 4 and 5 of the connector. Resistance values of 300 to 
2000 megohms indicate the cable assembly is not the cause. Resistance values of 1 to 100 
ohms indicate the cable and screen combination need to be replaced.
 
Following this procedure will eliminate pulling the controller only to discover the problem 
still exists.
 
 
Pinout Locations
 
-------------------------------------------...