The manufacturer intends that this game is to be operated for amusement purposes only and not in contravention of
any federal, state or local law or regulation of the United States or any foreign country governing gaming devices. All
operators of this game are responsible for its operation in accordance with such laws and regulations. The manufac-
turers factory settings for this game may require adjustment in order to comply with laws applicable in an operators
specific jurisdiction. It is the...
NOVEMBER 2000
16-11225
MIDWAY AMUSEMENT GAMES, LLC
3401 N
ORTH CALIFORNIA AVENUE CHICAGO, ILLINOIS 60618 USA
HTTP://WWW.MIDWAY.COM
AMENDMENT
Please note the following changes to part numbers in the original manual 16-40091-101:
• Page 46; the Tamper Resist Screws under the speakers are part number 4108-01193-10B.
Page 49: The Leg Leveler part number has been changed to 08-8023 and the measurements are now 1/2-13.
The Jam Nut part number is now 4424-01182-00 and measures 1/2-13.
Page 52; There are two...
The Grid - Header Installation Single Header
12
34
TR SCREW
GROUND LUG
RETAINER
FLUORESCENT
ESN NUT
TR SCREW
TR SCREW
FLANGE
KEPS NUT
STUD
RETAINER
ARTWORK
PLEXIGLAS
TR SCREW
Remove all items from carton. Inspect for damage.
Align Retainer holes with holes at bottom of Header
Housing. Fasten with tamper resistant screws.
Align Fluorescent Lamp Assembly with studs in rear
of Header Housing. Fasten with ESN nuts, but leave
a nut off the bottom left stud.
Connect Extender Cable to main harness and run it...
Distributor Notice
Date: 05-08-00
Game: TouchMaster 8000
Subject: Revision 9.04
TouchMaster 8000 Update
The TouchMaster 8000 is being updated to improve the performance of the Power Cell
game.
The update consists of 2 eproms that are at locations U51 & U52 on the CPU board.
You will be issued an RMA for the return of the replaced EPROMS from your Customer
Service representative.
Depending on your jurisdiction (country codes) and cash box setup, you may receive
specific sets of eproms...
MARCH 2000
16-80020-101
Manual Includes
• Installation Operations Adjustments Parts Information Wiring Troubleshooting
The manufacturer intends that this game is to be operated for amusement purposes only and not in contravention of
any federal, state or local law or regulation of the United States or any foreign country governing gaming devices. All
operators of this game are responsible for its operation in accordance with such laws and regulations. The
manufacturer’s factory...
The manufacturer intends that this game is to be operated for amusement purposes only and not in contravention of
any federal, state or local law or regulation of the United States or any foreign country governing gaming devices. All
operators of this game are responsible for its operation in accordance with such laws and regulations. The manufac-
turers factory settings for this game may require adjustment in order to comply with laws applicable in an operators
specific jurisdiction. It is the...
APRIL 2000
16-80021-101
Manual Includes
• Installation Operations Adjustments Parts Information Wiring Troubleshooting
The manufacturer intends that this game is to be operated for amusement purposes only and not in contravention of any federal,
state or local law or regulation of the United States or any foreign country governing gaming devices. All operators of this game are
responsible for its operation in accordance with such laws and regulations. The manufacturer’s factory...
Distributor Notice
Date: 05-05-00
Game: TouchMaster Infinity
16-11173
Subject: Revision 2.03
Free Infinity II Update
The CD Disks update for TouchMaster Infinity II is coming soon. In the interim, we are
sending an advance replacement hard drive and IDE interface cable that is to be used in
downloading version 2.03 software to TouchMaster Infinity.
The update procedure for the TouchMaster Infinity is very simple. Follow the steps listed
below.
Hard Disk Drives Update Procedure
Power...
FEBRUARY 2000
16-11089
Midway Amusement Games, LLC 3401 North California Avenue Chicago, Illinois 60618 USA
Anti-Tip Device Installation Instructions
To ensure that your Touchmaster Infinity upright cabinet is UL-compliant, you must
install the provided anti-tip device.
Materials supplied
(in coin vault
)
[ ] anti-tip plate (1) [ ] #8 screws (6)
[ ] leg leveler (1) [ ] 3/8-16 leg leveler nut (1)
INSTALLATION
Before you begin, verify the operation of
the existing game before making any
changes to the...
M
IDWAY
A
MUSEMENT
G
AMES
, LLC
3401 N. C
ALIFORNIA
A
VENUE
C
HICAGO
, I
LLINOIS
60618 USA
HTTP
://
WWW
.MIDWAY
.COM
JUNE 2000
16-11170.1
Update Hard DriveRefer to sheet 16-11081.2 (or most recent version), “CD-ROM Upgrade Instructions.”Reinstall Doors and Covers1. Hold Top Cover Assembly, with Mounting Bracket, in place over Base Assembly close
enough to reconnect fan cable.
2. Slide Top Cover Assembly fully onto Base Assembly. Do not pinch cables.
3. Fasten three screws and tighten Top Cover to...
