0004-U:rebmuN ledoM
General:
Channels14 - 69Electronic Elements17Output Impedance 300 ohms
Physical:
Boom Length 35Maximum Width 20Vertical Height 36Turning Radius 10Element Diameter .375Shipping Weight 5.0 lbs.Carton Dimensions 35.75 x 6.25 x 21.625
Performance:
1Gain (dB)VHF Low BandN/AVHF High BandN/AUHF Band10.0
2Half-Power Beamwidth (deg.)VHF Low BandN/AVHF High BandN/AUHF Band54.0
Front-To-Back Ratio (dB)VHF Low BandN/AVHF High BandN/AUHF Band18.0
1: Avg. Over Half-Wave Dipole (Ch. 14 - 60)2: -3...
0008-U:rebmuN ledoM
General:
Channels14 - 69Electronic Elements34Output Impedance 300 ohms
Physical:
Boom Length 35Maximum Width 40.5Vertical Height 36Turning Radius 20.25Element Diameter .375Shipping Weight 10.0 lbs.Carton Dimensions 35.75 x 6.25 x 41.625
Performance:
1Gain (dB)VHF Low BandN/AVHF High BandN/AUHF Band12.0
2Half-Power Beamwidth (deg.)VHF Low BandN/AVHF High BandN/AUHF Band30.0
Front-To-Back Ratio (dB)VHF Low BandN/AVHF High BandN/AUHF Band17.3
1: Avg. Over Half-Wave Dipole (Ch. 14 -...
How you use this mount depends on what installation
location you choose.
1. Choose a safe location away from unexposed objects
such as electric wires or pipes.
2. Attach the base to the roof, sidewall, rail, or attic rafter
or floor using the anchor screws (see Figure 1).
Note: You can also attach the mount base to a tower or
an existing mast. Attach the supplied mast clamps to the
tower structure or existing mast by assembling the U-bolts
and lock nuts around part of the tower structure or...
Model Number:Y10-7-13
General:
Channels7 - 13Electronic Elements10Output Impedance 300 ohms
Physical:
Boom Length 120Maximum Width 35.75Vertical Height 4Turning Radius 70Element Diameter .375Shipping Weight 4.8 lbs.Carton Dimensions 4.5 x 6 x 71
Performance:
1Gain (dB)VHF Low BandN/AVHF High Band9.4UHF BandN/A
2Half-Power Beamwidth (deg.)VHF Low BandN/AVHF High Band44.5UHF BandN/A
3Front-To-Back Ratio (dB)VHF Low BandN/AVHF High Band16.5UHF BandN/A
1: Over Half-Wave Tuned Dipole2: -3 dB Down Points3:...
BEFORE YOU BEGIN
Read this manual and Consumer Product Safety Commission
information. For your safety and convenience, plan each step of
the installation and purchase the necessary hardware in advance.
The order in which you perform the steps and the hardware re-
quired depends on the mounting and connection methods you
choose.
We recommend two people assemble the entire antenna on the
ground, then mount the assembled antenna on the mast. The
following steps are required to assemble your antenna...
Model Number:Y5-2-6
General:
Channels2 - 6Electronic Elements5Output Impedance 300 ohms
Physical:
Boom Length 80Maximum Width 112Vertical Height 4Turning Radius 69Element Diameter .375Shipping Weight 4.5 lbs.Carton Dimensions 5.875 x 4.75 x 81
Performance:
1Gain (dB) VHF Low Band4.9VHF High BandN/AUHF BandN/A
2Half-Power Beamwidth (deg.) VHF Low Band66.3VHF High BandN/AUHF BandN/A
3Front-To-Back Ratio (dB) VHF Low Band9.8VHF High BandN/AUHF BandN/A
1: Over Half-Wave Tuned Dipole2: -3 dB Down...
Model Number:Y5-7-13
General:
Channels7 - 13Electronic Elements5Output Impedance 300 ohms
Physical:
Boom Length 60Maximum Width 35.75Vertical Height 4Turning Radius 41.5Element Diameter .375Shipping Weight 4.7 lbs.Carton Dimensions 5.875 x 4.75 x 61
Performance:
1Gain (dB) VHF Low BandN/AVHF High Band6.9UHF BandN/A
2Half-Power Beamwidth (deg.) VHF Low BandN/AVHF High Band55.5UHF BandN/A
3Front-To-Back Ratio (dB) VHF Low BandN/AVHF High Band13.3UHF BandN/A
1: Over Half-Wave Tuned Dipole2: -3 dB...
FOLLOW THESE RULES AND LIVE
1. If you’re not sure about a careful, safe installation—don’t try to do it
yourself. Call your local power company or check with Yellow Pages
under “Antennas or Television and Radio Antenna Systems” for an in-
staller in your area.
2. With at least two people, assemble as much of the antenna on the ground
as possible.
3. Watch out for overhead powerlines. Check the distance to the powerlines
before you start installing—WE RECOMMEND YOU STAY A MINIMUM
OF TWICE THE MAXIMUM...
