Installation Instructions
Optional Tools Needed: Ladder, Safety Goggles, Gloves, Tin Snips & Metal\
Bending Tool
•
Ensure gutter syste m is clean and free of debris
• Inspect gutter ha ngers, e nsuri ng:
- tightly fastened to fascia and attached to gutter
- m inim um one hanger every 24 inches
•
Install fi rst Diam ond Gutter Shield
® at beginning of gutter run
• Measure 2 inches from end of Shield
• Cut and re move a notch fro m front and back edges
• Cut a line 2 long down...
Tools that may be required:
• Tin snips or hacksaw to miter cut corners and cut pieces to length
• Pliers to bend the lip of the gutter around gutter spikes
• Power screw driver
Starting at one end of the gutter, slightly lift the first row of shingles
and slide the back edge of the gutter cover under the shingles (Fig. A),
then pull the front edge of The Gutter Shingle forward so that it clips to
the front edge of the gutter. (Fig. B) Note: If there is not enough space
between the gutter...
Helps Keep Leaves and Debris Out of Gutters.
Hinged Gutter Guard
™
• Convex hinged design provides strength
and allows access to gutters.
• Made of long lasting galvanized steel,
aluminum or copper. Powder coated steel
also available.
• Three foot sections come in sizes that fit
any standard style “K” gutters.
• 70 guards needed for the average home
(approximately 210’).
www.amerimax.com800-347-2586
™
© 2010 Amerimax Home Products, Inc. 201008
Installation Thoroughly clean...
INSTALLING METAL GUTTER SYSTEMS INSTRUCCIONES EN ESPAÑOL EN EL REVERSO
TOOLS REQUIREDEye protection, pencil, tape measure, string, level, hack saw, drill, screwdriver, hammer, pliers, ladder, tin snips and gloves.PLANNING - Measure Roof Line and Locate DownspoutsUse chart to fi ll in quantity of each item needed to complete your job. (Note: Stores may not stock every item listed below)
40
20
20 20
40
Downspouts
10
EXAMPLE:
# Description Quantity
A
Gutter - 10 ft.
BDownspout - 10 ft. (2x3 or...
LOCK-ON Gu tter Gu ard
TM
Installation / Installation / Instalación
®
800-347-2586
AmerimaxHP.com
Lancaster, PA 17603 800-461-5706
EuramaxCanada.com
Barrie, ON L4N 4P4
Made in USA - Hecho en EE.UU. - Fait au É-U
1. Ensure front edge locks into place on front of gutter.
2. Ensure back edge rests on top of gutter hangers.
3. Ensure 1/2 inch overlap at end of each gutter guard section.
1. Assurez-vous que le rebord avant s’enclenche sur l’avant de la gouttière.
2. Assurez-vous que le rebord arrière...
Measure your project and use tables below to determine
quantities
PlanningInstallation
Metal Gutter System
Select Your Gutter Components
Use chart below to fill in quantity of each item needed to complete your job.
A
C
D E
F
GH
I
K
L
M
O
Q
R
PS
T
U
Tools Required
J
N
(800) 347-2586 Amerimax.com
Pencil
Tape measure
String
LevelWork gloves
Pliers
Hammer
Ladder
Tin snips
Eye protectionScrewdriver
Hack saw
Drill
Gutter ComponentsTotal Length
50 ft75 ft100 ft 120 ft140 ft150 ft160 ft170 ft180 ft...
www.amerimax.com800-347-2586
™
© 2010 Amerimax Home Products, Inc. 201008
Call today to find out more
about Amerimax’s full line
of rain carrying products and
accessories! 800-347-2586
• Installs easily in aluminum or galvanized
gutter systems.
• Fits 5" K-Style gutters.
• Economical 6 inch x 20 foot rolls.
• 8 rolls needed for average home.
• Durable co-polymer material - black.
Helps Keep Leaves and Debris Out of Gutters.
Installation
Rolled Gutter Guard
™...
450 Richardson Drive
Lancaster, PA 17603
www.amerimax.com
(800) 347-2586
TM
285369.indd 16/8/09 12:13:49 PM
Helps Keep Leaves and Debris Out of Gutters.
Snap-In Guard &
Snap-In Filter
™
• Install in seconds by snapping on to front
edge of gutter.
• Handy 3 foot sections fit standard “K” style
aluminum, steel or vinyl gutters.
• Made of high quality, rigid PVC.
• Snap-In design will not collapse under
debris.
• 70 guards/filters needed for average home
(approximately 210’).
• Fits 4”, 5” & 6” gutters.
• Snap-In Guard available in white, brown or
black.
• Snap-In Filter available...
J-channel (Decorative)
Frieze Moulding
12 wide Panels
Fascia 4,
6, 8, 10
heights
available1 Fascia
Runner * Note – When product is installed in Florida see
Approval # FL 5896 for installation instructions with specifi c
adherence to the 2004 Florida Building Code.
http://www.fl oridabuilding.org/pr/pr_detl.asp?IPT=5896&RV=0&fm=ROSrch
MATERIAL SELECTION GUIDE
AND INSTALLATION INSTRUCTIONS
Attractive: Aluminum won’t split, rot, or warp.
Baked on fi nish resists peeling, cracking,...
Gutter guards
are instal led on rain gu tters to
help pr ev ent leaves, twigs and
other debris from fal ling into the
gu tters and clogging both the
gu tters and downspouts.
Obstructed gu tters and down-
spouts will pr ev ent rain w ater
and mel ting snow from flowing
thr ough the gu tter system.
W ater that cannot flow freely
can back-up and overflow the
gu tter causing damage to the
landscaping and the foundation.
Damage to the roof line and the
f ascia...
