SBX-GTDM
Stainless Steel Surface Mount Box for GT-DM
The SBX-GTDM is an 16-Gauge stainless steel enclosure designed for surfa\
ce mounting the
GT-DM All-in-One entry panel.
-INSTRUCTIONS-
SBX-GTDM Instr.
0711JD
Aiphone Corporation
www.aiphone.com
[email protected]
P: 800.692.0200
MOUNTING INSTRUCTIONS:
1. The SBX-GTDM is designed to mount to a 1 or 2-gang
box/ring or to any flat surface.
2. Pass cable through the knockout hole.
3. Secure mounting box to wall.
4. Connect wires to GT-DM entry station....
SBX-ISDVF
Stainless Steel Surface Mount Box
The SBX-ISDVF is an 18-Gauge stainless steel enclosure designed to surfa\
ce mount the
IS Series and IX Series stainless steel flush mount door stations.
Compatible with the IS-DVF, IS-IPDVF, IS-SS, IX-DF, IX-SS, IX-DF-HID, and IX-DF-RP10.
-INSTRUCTIONS-
SBX-ISDVF Instr.
0416JD
CONTENTS:
- SBX-ISDVF surface mount box
- #15 Torx Security 1/4” Hex bit
- Qty 4. 8/32 x 1” Torx Security Screws
- Qty 4. 8/32 Speed Nuts
MOUNTING INSTRUCTIONS:
1. The SBX-ISDVF is...
SBX-ISDVFP
Stainless Steel Surface Mount Box
The SBX-ISDVFP is an 18-Gauge stainless steel enclosure designed for surface mounting \
the
IS prox and multiCLASS reader door stations.
Compatible with the IS-IPDVF-HID, IS-DVF-HID, IS-DVF-RP10, and IS-IP4DVF\
-INSTRUCTIONS-
SBX-ISDVFP Instr.
0416JD
MOUNTING INSTRUCTIONS:
1. The SBX-ISDVFP is designed to mount to a 1 or 2-gang
box, ring, or to any flat surface.
2. Pass cable through the knockout hole.
3. Secure mounting box to wall.
4. Connect wires to...
SBX-ISDVFRA
Stainless Steel Surface Mount Box
The SBX-ISDVFRA is an 18-Gauge stainless steel enclosure designed to surface mount the \
IS Series and IX Series emergency door stations.
Compatible stations: IS-DVF-2RA, IS-SS-2RA, IS-SS-RA, IS-SS-CI, IX-DF-2\
RA, IX-SS-2RA,
and IX-SS-RA
-INSTRUCTIONS-
SBX-ISDVFRA Instr.
0416JD
MOUNTING INSTRUCTIONS:
1. The SBX-ISDVFRA is designed to mount to a 1 or 2-gang
box, ring, or to any flat surface.
2. Pass cable through the knockout hole.
3. Secure mounting...
- INSTRUCTIONS -
The SBX-LSE is an 18-Gauge stainless steel lockable enclosure designed to give the video door station
added protection during non-business hours. This enclosure is designed to be mounted with the following
model Aiphone units: JF-DV, JF-DVF, JK-DV, JK-DVF, JP-DV, and JP-DVF.
Stainless Steel Security Lock Box
For Video Door Station Models: JF-DV, JF-DVF, JK-DV, JK-DVF, JP-DV, JP-DVF
CONTENTS:
- SBX-LSE enclosure box
- Mounting plate for JF/JK/JP-DV door station
- “L” bracket (for...
- INSTRUCTIONS -
The SBX-LSP is an 18-Gauge stainless steel lockable enclosure designed to give the video door station
added protection during non-business hours. This enclosure is designed to be mounted with the following
model Aiphone units: AX-DVF-P, JF-DVF-HID, JF-DVF-HID-I, JK-DVF-HID, and JK-DVF-AC.
Stainless Steel Security Lock Box
For Video Door Stations with embedded prox readers or access keypads
CONTENTS:
- SBX-LSP Enclosure
- “L” bracket (for securing in open position)
- Instructions
1....
SBX-TL2000
Stainless Steel Surface Mount Box for TL-2000
The SBX-TL2000 is an 18-Gauge stainless steel enclosure designed to surf\
ace mount the
TL-2000 telephone entry panel.
-INSTRUCTIONS-
SBX-TL2000 Instr. 0116JD
Aiphone Corporation
www.aiphone.com
[email protected]
P: 800.692.0200
MOUNTING INSTRUCTIONS:
1. The SBX-TL2000 is designed to mount to a 1 or 2-gang
box/ring or to any flat surface.
2. Pass cable through the knockout hole.
3. Secure mounting box to wall.
4. Connect supplied speed nuts to...
POWER SUPPLY ADAPTORModels;
SKK-620C
INSTALLATION MANUALPRECAUTIONS
1. Do not install or make any wire terminations while power supply is plugged in. It can cause electrical shock or damage to the unit.
2. Before plugging in the unit,make sure wires are not crossed or shorted. Fire or electric shock could result.
3. This power supply unit is designed especially for the Aiphone Intercom System. Do not use this power supply unit for any other purpose.
4. Do not put anything on the unit or cover the unit...
Modular Tower
Modular Tower Assembly Instructions
TW-MKL: L-Bracket Mounting Kit contents:
4 - L-Bolts
8 - ¾” Hex Nuts
8 - ¾” Washers
1 - Printed Template
• It is recommended to transfer the provided template to a piece of wood b\
etween ½” and 1” thick.
• Use that wood template to replicate the tower base and secure it to the \
L-bolts with the provided
washers and nuts.
Ensure all of the components required to complete the installation are p\
resent prior to beginning.
Installation:
1. Intercom...
IS Tower Strobe
Strobe / Illumination Light Wiring Instructions
The following instructions are for wiring the beacon/strobe light on top of TW-Series towers, as well
as wiring the panel light located above the panel hole.
These instructions apply to models: TW-LCB, TW-LCK, TW-LCR, TW-LCW, and TW-LCY.
Locate the beacon/strobe wires and connect to a 24V DC power supply.
• Red to +24V DC
• Black to - (Ground)
• Connect the white trigger wire to the Normally Open (NO) terminal of relay 2 on the IS...
TW-SPL
Door Station Adaptor Plate for Towers
-INSTRUCTIONS-
The TW-SPL is an adaptor plate for Aiphone’s standard IS and IX Series door stations to mount to
an Aiphone tower or wall box. The TW-SPL will secure to the mounting position of the Aiphone tower
or wall box and in turn give you the mounting provisions for the standar\
d Aiphone IS and IX stations.
This is ideal when using TW-22 Series high / low tower for car / truck gate entry applications, or \
any
time a non-emergency style station needs...
