Technical Support
If you need any assistance to get your unit functioning properly, please have your
product information ready and contact Addonics Technical Support at:
Hours: 8:30 am - 6:00 pm PST
Phone: 408-453-6212
Email: http://www.addonics.com/support/query/
v7.1.11
T E C H N O L O G I E S
User Guide
Internal IDE/SATA/USB
DigiDrive (AEDMDISU2)
Mode Jumper (JP4):
Note: Only applies on SATA connection
The internal SATA / USB DigiDrive supports Type I, II CF Cards, CF Micro drive, SD, SDHC, miniSD...
ADDONICS TECHNOLOGIES
Model: AEIDDSAU, AEIDDSAUWP (read only mode)
The internal SATA / USB DigiDrive supports Type I, II
CF Cards, CF Micro drive, SD, SDHC, miniSD (with
adapter), Trans flash, SD HS (Secure Digital High
Speed), MMC Cards (4-bit and 8-bit modes), RS-
MMC, MMC-Micro, MMC Plus, Smart Media, xD
picture card- both H and M types, Memory stick,
Memory stick PRO, MS Extreme III Type media, MS
PRO, HS (4-bit mode).
Mode Jumper (JP4):
Note: Only applies on SATA...
ADDONICS TECHNOLOGIES
Model: AEIUDDU2, AEI9UDDU, AEIUDDSA
Installation Guide
Any flash media below is compatible to use with the Internal
Ultra Digidrive, using the optional Addonics CF D igiAdapter
and 4-in-1 DigiAdapter or equivalent third party adapter.
Note: The internal UDD is not compatible with Wireless
Broadband card, Panasonic P2 card, SRAM card
and Linear Memory card.
Operation of the Internal UDD
The internal UDD is designed not to draw any power when
there...
ADDONICSTECHNOLOGIESModel:AEUDMACF,AEUDMACFWP(read-only)Step1MounttheIDE-CFAdapterPROona3.5”drivebay.Step2Connecta4-pinMolexpowercablefromthePCpowersupplytothe4-pinMolexpowerconnectorontheIDE-CFAdapterPRO.Step3Bydefault,theIDE-CFAdapterPROissetasamasterdevice.SetjumperonIDEMastermodeorSlavemode(J5ON=Master,J5OFF=Slave)Step4Connect40-pinIDEconnectortoIDEcontrolleronmotherboardusingIDEflatcable.Note:TheIDE-CFAdapterPROsupportshotswap.TECHNICALSUPPORT(8:30amto6:00pmPST)Phone:408-453-6212Email:http://www.add...
ADDONICS TECHNOLOGIES
Model: AEUDMD4, AEUDMD4WP (read only mode)
Step 1 Mount the IDE DigiDrive PRO on a 3.5” drive bay.
Step 2 Connect a 4-pin floppy power cable from the PC power supply to the 4-pin
Molex power connector on the IDE DigiDrive PRO.
Step 3 By default, the IDE DigiDrive PRO is set as a master device. Set jumper on
IDE Master mode or Slave mode (JP2 ON = Master, JP2 OFF = Slave)
Step 4 Connect 40-pin IDE connector to IDE controller on motherboard using...
T E C H N O L O G I E S
Technical Support
If you need any assistance to get your unit functioning properly, please have your
product information ready and contact Addonics Technical Support at:
Hours: 8:30 am - 6:00 pm PST
Phone: 408-453-6212
Email: http://www.addonics.com/support/query/
www.addonics.com
User Guide
Internal Micro SATA UDD
(MSUDDSA)
ADDONICS TECHNOLOGIES
Model: MSUDDUS
I. Mounting the Internal Micro SATA UDD on a 3.5” drive
bay
Using the screws provided, mount the bracket on a 3.5” drive bay
on the system
II. Connecting cables
Note: When both SATA and USB connections are used, USB
takes precedence over SATA.
a. USB 5-pin header connection
Connect the USB cable provided to the USB 5-pin
header on the internal micro SATA PCB and the other
end to the USB header on the...
Technical Support
If you need any assistance to get your unit functioning properly, please have your
product information ready and contact Addonics Technical Support at:
Hours: 8:30 am - 6:00 pm PST
Phone: 408-453-6212
Email: http://www.addonics.com/support/query/
v7.1.11
www.addonics.com
T E C H N O L O G I E S
User Guide
Internal UDD II
(UDD2SA)
www.addonics.com
M2 PCIe SSD + 2 M2 SSD - PCIe 3.0 4X
(AD3M2SPX4)
Technical Support
If you need any assistance to get your unit functioning properly, please have
your product information ready and contact Addonics Technical Support at:
Hours: 8:30 am - 6:00 pm PST
Phone: 408-453-6212
Email: http://www.addonics.com/support/query/
www.addonics.com
(AD4SAHM2)
Technical Support
If you need any assistance to get your unit functioning properly, please have
your product information ready and contact Addonics Technical Support at:
Hours: 8:30 am - 6:00 pm PST
Phone: 408-453-6212
Email: http://www.addonics.com/support/query/
www.addonics.com
M2 PCIe SSD - PCIe 3.0 4-Lane adapter
(ADM2PX4 )
Technical Support
If you need any assistance to get your unit functioning properly, please have
your product information ready and contact Addonics Technical Support at:
Hours: 8:30 am - 6:00 pm PST
Phone: 408-453-6212
Email: http://www.addonics.com/support/query/
Technical Support
If you need any assistance to get your unit functioning properly, please have your
product information ready and contact Addonics Technical Support at:
Hours: 8:30 am - 6:00 pm PST
Phone: 408-453-6212
Email: http://www.addonics.com/support/query/
v7.1.11
www.addonics.com
T E C H N O L O G I E S
User Guide
CF Hard Drive Adapter
(AD44MIDECF / AD44MIDE2CF)
ADDONICS TECHNOLOGIES
Model: ADMSCF18
Installation Guide
Angled View
The Micro SATA CF adapter enables using of Compact
Flash (CF) media as a replacement for the Micro SATA hard
drive in the iPOD or the sub-Notebooks. Once installed, the
CF media behaves like the Micro SATA SSD with low power
consumption, fast access time and completely shock
resistant.
1. Loosen the 4 screws.
2. Slide your Compact Flash card into the adapter.
3. Take out the 2.5” hard drive of your...
Steps to Create HyperDuo from Controller BIOS
1. Connect one HDD and one mSATA SSD to Hybrid HDD - mSATA SSD controller.
2. Enter Ctrl_M during Marvell Controller POST display to enter into BIOS Menu
3. Select “HBA 0: Marvell 0” and Enter
4. Hit Enter “ Configuration Wizard” selection dialog box
5. Hit “Space bar” to select SSD and HDD, an ‘*” will appear ne\
xt to the device after it is
selected.
6. After SSD and HDD are selected, hit Enter
7. “HyperDuo: Safe” option is highlight. This is...
Technical Support
If you need any assistance to get your unit functioning properly, please have
your product information ready and contact Addonics Technical Support at:
Hours: 8:30 am - 6:00 pm PST
Phone: 408-453-6212
Email: http://www.addonics.com/support/query/
T E C H N O L O G I E S
www.addonics.com
Quad mSATA PCIe SSD
(AD4MSPX2)
User Guide
Technical SupportIf you need any assistance to get your unit functioning properly, please have your product information ready and contact Addonics Technical Support at:Hours: 8:30 am - 6:00 pm PSTPhone: 408-453-6212Email: http://www.addonics.com/support/query/T E C H N O L O G I E Swww.addonics.comQuad mSATA PCIe SSD(AD4MSPX2-A)User Guide
