Technical Support
If you need any assistance to get your unit functioning properly, please
have your product information ready and contact Addonics Technical
Support at:
Hours: 8:30 am - 6:00 pm PST
Phone: 408-453-6212
Email: http://www.addonics.com/support/query/
T E C H N O L O G I E S
www.addonics.com
Sapphire Snap-In Disk Array with eSATA & USB 3.0
(S4SHU3)
User Guide
www.addonics.com
6G 10-Port SATA
PCIe 2X controller
(AD10SA6GPX2)
Technical Support
If you need any assistance to get your unit functioning properly, please have
your product information ready and contact Addonics Technical Support at:
Hours: 8:30 am - 6:00 pm PST
Phone: 408-453-6212
Email: http://www.addonics.com/support/query/
CONTACTUSTechnicalSupportIfyouneedanyassistancetogetyourunitfunctioningproperly,pleasehaveyourproductinformationreadyandcontactAddonicsTechnicalSupportat:Hours:8:30am-6:00pmPSTPhone:408-453-6212www.addonics.comPhone:408-573-8580Fax:408-573-8588Email:http://www.addonics.com/sales/query/Overview2-PorteSATA6GPCIe2Xcontroller(AD2ES6GPX2)Installation:InstallcardintoaPCIExpressslotwithtwo(2)ormorelanes.PowerupthesystemfortheinstallationoftheAHCIdriver.ThiscontrollerusesAHCIdriverthatcomeswithmodernOSsuchasWind...
Technical Support
If you need any assistance to get your unit functioning properly, please have your
product information ready and contact Addonics Technical Support at:
Hours: 8:30 am - 6:00 pm PST
Phone: 408-453-6212
Email: http://www.addonics.com/support/query/
v8.1.11
T E C H N O L O G I E S
www.addonics.com
User Guide
External 8-Por t SATA/SAS PCIe controller
(AD2MS6GPX8-E)
Specifications
Chip Set: Silicon Image Sil3132 Integrated Host Controller
Interface: PCI-Express Bus Compatible
I/O Ports: 2 SATA Ports
Regulatory approvals: FCC, CE
Features:
• Supports Serial ATA Generation 2 transfer rate of 3.0 Gbps (300 Mb/s)
• Supports First-Party DMA Commands for NCQ (Native Command Queuing)
• Supports 1-lane 2.5Gbps PCI Express
• Supports RAID0, 1, 5, and 10 using Silicon Image SATARAID5 Array Manager
• Supports individual drive mode
• Fully compliant with Serial ATA...
When you boot into a system, after POST, the RAID BIOS of the controller card with the attach SATA device
information displayed on the monitor.
Hardware Installations:
1. Power off PC and remove its cover.
2. Select an empty PCI-E slot and insert the SATA controller.
3. Makes sure to secure the bracket with a screw. Close the PC cover.
T E C H N O L O G I E S
User Guide
6G 2-port SATA
PCI-Express Controller
(AD2SA6GPX1)
Technical Support
If you need any assistance to get your unit functioning...
T E C H N O L O G I E S
Quick Guide
Hybrid HDD-SSD Controller (AD2SAHSSD)
Technical Support
If you need any assistance to get your unit functioning properly, please have your
product information ready and contact Addonics Technical Support at:
Hours: 8:30 am - 6:00 pm PST
Phone: 408-453-6212
Email: http://www.addonics.com/support/query/
v7.1.11
www.addonics.com
Technical Support
If you need any assistance to get your unit functioning properly, please have
your product information ready and contact Addonics Technical Support at:
Hours: 8:30 am - 6:00 pm PST
Phone: 408-453-6212
Email: http://www.addonics.com/support/query/
T E C H N O L O G I E S
www.addonics.com
Internal 6G 4-Por t SATAPCIe controller
(AD4SA6GPX2)
User Guide
ADDONICS TECHNOLOGIES
Model: AD5U2SA
Installation Guide
Types of Bus Slots
AD5U2SA Windows Driver Installation for SATA
Note: If you are only configuring independent drives using
the host controller all you need to install is the
driver. This controller connects to a PCI slot.
1. Connect the SATA host controller to an available PCI
slot.
2. Turn computer ON. When Windows boots up, the...
Addonics
TE C HNO LO GIE S
SATA/IDE RAID PCI-E Controller
Model: ADI2S3GPX1-2E
User’s Guide
Version 1.0
FCC Warning Statement This equipment has bee n tested and found to comply with the limits for a class B digital device pursuant to Part 15 of the FCC rul es. These limits are designed to prov ide reasonable protection against harmful int erference in a residential installation. This equipment generates, uses and can radiate radio frequency energy....
ADDONICS TECHNOLOGIES
ADS3GX4R5-MLM (Multilane 4X PCI-X Controller For Mac)
Addonics ADS3GX4R5-MLM Macintosh Instructions
The ADS3GX4R5-MLM has been tested on a PowerMac G5 Dual 2.0
GHz model with PCI-X slots and on a PowerMac G4 with PCI slots.
Mac OS X 10.4.x or later is required for the driver to work properly.
Hardware Install:
1. Turn the PowerMac G4 or G5 off and disconnect all cables.
2. Make sure that you are grounded to avoid static electricity.
3. Open the PowerMac G4 or...
ADDONICS TECHNOLOGIES
Model: ADSA2
Installation Guide
Angled View
Side View
Types of Bus Slots
Note: The ADSA2 SATA 2-Port RAID Controller connects
to a PCI Bus slot.
ADSA2 Windows Driver Installation
Note: If you are only configuring independent drives using
the host controller all you need to install is the
driver.
1. Connect the SATA host controller to an available PCI
slot.
2. Turn computer ON. When Windows boots up, the...
Technical Support
If you need any assistance to get your unit functioning properly, please have your
product information ready and contact Addonics Technical Support at:
Hours: 8:30 am - 6:00 pm PST
Phone: 408-453-6212
Email: http://www.addonics.com/support/query/
Specifications
Chip Set: Silicon Image Sil3132 Integrated Host Controller
Interface: PCI-Express Bus Compatible
I/O Ports: 2 SATA Ports
Regulatory approvals: FCC, CE
Features:
• Supports Serial ATA Generation 2 transfer rate of 3.0 Gbps...
ADDONICS TECHNOLOGIES
ADSA3GPX1-2EM (2-Port eSATA II PCI-Express controller)
SPECIFICATIONS
Chip Set: Silicon Image Sil3132 Integrated Host
Controller
Interface: PCI Express Bus
I/O Ports: (2) Internal SATA Connectors
Regulatory approvals: FCC, CE
Features:
· Supports Serial ATA Generation 2 transfer rate of
3.0 Gbps
· Supports First-Party DMA Com mands for NCQ
(Native Command Queuing)
· Configure RAI D 0 & 1 and independe nt drives using
Disk...
BIOS Jumper (J4)
Enable BIOS (1-2) – RAID firmware is active
Disable BIOS (2-3) – Base firmware is active
By default, the BIOS jumper is set to enable BIOS (1-2) for the ADSA3GPX8-4E. This means that when
you boot into a system, after POST, the RAID BIOS of the controller card with the attach devices shows
up. The RAID driver needs to be installed.
If the BIOS jumper is set to disable BIOS (2-3) when you boot into a s\
ystem, after POST, the RAID BIOS
of the controller card does NOT show up. The BASE...
