Zenith Projector Lxg 120 User Manual

TRACKING
40
TITLE
lClock Function
This function adjusts the horizontal width of the projected image to enable the image to fit on the screen size. 
lPhase Function
This function is for the detailed adjustment of the clock function.
Press the menu button and move the pointerbutton up or down to select the TRACKING
menu. 
1
Press the enterbutton and move the pointerbutton up or downto select the Clockor Phase
item.
2
exit           move        adjustMenu Menu
G VIDEOG POSITIONG SPECIALETRACKINGAuto...

Adjusting Video 
Press the menubutton and move the pointerbutton up or downto select the VIDEO menu. 
1
Move the pointerbutton up or down to select the desired video item.
3
Move the pointerbutton left or right or press the volumebuttons to adjust the selected video
item: 
l To restore the original image condition select the Resetitem and press ENTER.l To exit the menu display, press the menubutton repeatedly.
4
Press the enterbutton.
2PC Mode PC Mode
AV Mode
AV Mode
exit           move        adjustMenu...

42
INFORMATION
Supported Monitor Display
lThe projector displays images at a resolution of 1024 x 768 pixels. To display higher resolution images 
(1152 x 864 mode, 1280 x 1024 mode), the projector compresses it to 1024 x 768. The following table lists the
display formats supported by the projector.
lIf the projector does not support the input signal, the OUTOF RANGE message will appear on the screen.
lThe projector supports DDC1/2B type as Plug & Play function.(Auto recognition of PC monitor)...

Maintenance
lThe projector requires very little maintenance. You should keep the lens clean because any dirt or stains may
appear on the screen. Clean the air filter attached at the bottom of the projector periodically because a
clogged air filter prevents proper ventilation that is necessary to cool the projector and prevents it from over-
heating. If any parts need to be replaced, contact your service center.
l When cleaning any part of the projector, always turn the power off and unplug the projector...

Troubleshooting
Before calling for service, please check the following symptoms/solutions.
You may be able to avoid a service call.
SymptomCauseSolutionPage
Operation indicator-Power Cable is loose.• Tighten power cable securely to projector25
does not light.and power outlet.
Projected image-Lamp is about to fail.• Contact service center to replace lamp.13
gets darker or
deteriorates.
Temperature-Cooling fan not working.• Contact service center.13, 43
indicator is red.-Internal circuits damaged.• Contact...

Memo
45 

Operating Condition
46
Specifications.
Model
LCD panel size
resolution
screen size
projecting distance
remote control distance
speaker system
horizontal / vertical ratio
zoom ratio
Video Compatibility
Power
height
width
length
weight LXG-120
0.9 in.  (22.9 mm)
1024 (Horizontal) x 768 (Vertical) pixels
40-300 in. (1.01-7.6 m)
5.03-54.08 ft. (1.64-16.35 m.)
39.3 ft. (12 m)
1W
4:3 (horizontal:vertical)
1:1.3
NTSC/PAL/SECAM/NTSC4.43/PAL-M/PAL-N
AC120V 60Hz
3.9 in. (98.5 mm) (including front foot) 
9.3 in....

206-3671
P/NO : 3828VA0245G (3840VA0026E)