Zanussi Zws 165 W User Manual

							 
 
 
 
 
 
          WARNING!    
       F unctions vary depending on the  model you have chosen.If you 
      forgot to use additional function and your machine starts to wash 
      push the additional function button if the indicator light is on.     
      Additional  function will be activated.If the indicator light is not    
      on,additional function will not be activated.
  
 
 
 
 
 
    
  
  
 
PROGRAM KNOB   With the program knob, you can select the program with which you desire to 
wash your clothes. You can adjust the program selection process by turning 
the program knob in both directions. You must be careful that the adjustment 
sign of the program knob is exactly on t he program you want to select. When 
you bring the program knob to O(off) position, while your machine is running, 
your program will remain incomplete. 
 
 
 
 
 
 
      
   
 
    
 
 
 
 
  
 
  
 
   
   
 
    
  
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 10 
 
 
 
 
 
 
 
 
						

							 
 
 
 
 
 
 
O Stop 
1 Cotton 90˚ 
2 Cotton 60 ˚(Prewash) 
3 Cotton 60 ˚ 
4 Cotton 40 ˚ 
5 Eco wash 
6 Cotton 30 ˚ 
7 Quick wash 
8 Cotton cold 
9 Mix wash 
10 Synthetic 60 ˚ 
11 Baby wash 
12 Synthetic 40 ˚ 
13 Sport clothes 
14 Synthetic cold 
15 Curtain wash 
16 Delicate 30 ˚ 
17 Delicate cold                  21 Rinsing 
18 Hand wash                    
19 Wool 30 ˚                       22 Spinning 
20 Wool cold 
          23 Draining            
 
SECTION 5: WASHING YOUR LAUNDRY 
•   Plug the machine. 
•   Open the tap water. 
First wash cycle 
There may be water left inside your machine after factory tests and trials.It is 
recommended that the first wash cycle should be made without any laundry 
so that carry out this water; pour half a measuring cup of normal allpurpose 
detergent into compartment 2 and select cotton program at 90°C.  
BEFORE WASHING  
Discrimination of your laundry 
•  Discriminate your clothes according  to their types (cotton, synthetic, 
sensitive, woolen, etc.),washing te mperatures and level of dirtiness. 
•   Never wash your white and coloured clothes together. 
•   Since your new coloured clothes may shed dye on the first wash, 
wash them separately. 
•   Be careful that no metal pieces are  found on or in the pockets of your 
clothes, remove if there is any. 
•   Zip and button your clothes. 
•   Remove the plastic or metal hooks of the curtains and laces or place 
them inside a washing bag and tie. 
 
 
 11 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
						

							 
 
•  Pull the textiles like trousers,k nitted fabric,t-shirt and sweat shirt 
inside out. 
 
 
•  Wash your small clothes like socks and handkerchiefs in a washing 
bag. 
 
 
 
 
 
 
 
 
 
 
Wash up tol 90  ˚ C   Wash up to 60  ˚C Wash up to 30  ˚C     Not washable in 
         washing machine 
 
 
Placement of the clothes into the machine  
•  Open the door of your machine. 
 
•  Fill your clothes in your machine in a well-spread manner. 
 
 
•  Place each cloth separately. 
  •  When you shut the door of your machine, be careful that no cloth is 
jammed between the cover and the gasket. 
 
 
•  Shut the door of your machine tight ly otherwise your machine will not 
start the washing process. 
 
 
 
 
Filling detergent in the machine    The quantity  of the detergent that you will f ill in your machine depends on the 
following criteria: 
 
 
•  Your detergent consumption will  change according to the dirtiness 
level of your clothes. For your sli ghtly dirty clothes, do not pre-wash 
and put a small amount of detergent  in the compartment no.2 of the 
detergent drawer. 
 
 
 
 
•  For your excessively dirty clothes, select a program with pre-
washing, fill ¼ portion of the deter gent you will put in compartment  
1 in the detergent drawer and the remaining portion in compartment  
2. 
 
 
 
 
•  In your machine,use the detergents developed especially for 
automatic washing machines. The quantities that will be used for 
your clothes are written on  the packing of the detergents. 
 
 
 
•  As the hardness of your wate r increases, the amount of the 
detergent to be consumed will also increase. 
 
 
•  As the amount of your clothes  increases, the amount of the 
detergent to be consumed will also increase. 
 
 
•  Fill your softener in the softener compartment in your detergent 
drawer. Do not exceed the MAX level. Otherwise, the softener will 
diffuse in the washing water via the siphon. 
 
 
 
•  The softeners with high density should be diluted with some water 
before filling in the drawer. That is  because the softener with high 
density obstructs the siphon and prev ents the flow of the softener. 
 
 
 
 
 
 
 
 
 12 
 
 
 
 
 
 
 
 
 
 
 
 
						

							 •  You can use fluid detergents in all programs without pre-washing. 
For this, mount the fluid detergent level plate in the second 
compartment of the detergent drawer and arrange the amount of 
fluid detergent according to the levels on this plate. 
 
 
 
 
  
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
   
 
 
 
RUNNING THE MACHINE     
fluid 
detergent 
level plate 
Program selection and features 
Select the program and additional functions
 appropriate for your clothes from 
Table-1. 
Start/Pause 
By pressing this button, you can start the program you have selected or 
pause a running program. 
 
Starting the program 
•  Adjust the program knob to a program you desire. 
•   The program ready light will be on. 
•   If you want, you can select one or more additional functions. 
•   Run the program which you have selected by pressing the 
Start/Pause button. 
Changing the program 
 If you have selected a program and you do not want if to continue: 
•  Press the start/pause button. 
•   Bring the program knob to O(off) status. 
•   Adjust the program knob to the  program you desire.(You can select 
the program that you desire from Table-1). 
•   The program ready light will be on. 
•   By pressing the start/pause button,  run the program which you have 
selected. 
Cancellation of the Program   
If you desire to end a running program early: 
•  Press the start/pause button. 
•   Turn the program knob to O(off) status. 
•   Turn the program knob to “Draining” or “Spinning” programs. 
•   The program ready light will be on. 
•   Run the program you have select ed by pressing the start/pause 
button. 
Program ending 
•  Your machine will automatically  stop when the program you have 
selected ends. 
•   The program end light will be on. 
•   Turn the program knob to O(off) position. 
 13 
 
						

							 
 
 
 
 
 
  •  The door will be unlocked in approximately two minutes after the 
program ends.You can open the door by pulling the handle of the 
door towards yourself and take out your clothes. 
 
 
 
•  After you unload your clothes leave the door open to dry the interior 
of your machine. 
 
 
• Unplug your machine. 
 
•  Close the water tap. 
 
 
 
      
WARNING!    
If the power is off end on again after a while on any stage of the washing 
program, your machine will continue t he program from the point where it was 
interrupted. This is not harmful for your machine. 
 
 
 
 
 
  
 
Child lock 
 
Child lock is used in order to protect the washing cycle from the effects of 
unwanted button activations during the cyc le.Child lock is activated by 
pressing the first and third button on the control panel at the same for more 
than 3 sec.When child lock is activated,LEDs on the function buttons blink to 
indicate that child lock is active.In  order to deactive child lock, the same 
buttons (1st and 3rd) should be pressed again for more than 3 
seconds.Deactivation of child lock is shown by blinking of LED on Start/Pause 
button. 
 
 
 
 
 
 
 
 
         
 
  SECTION 6: MAINTENANCE AND CLEANING      • Unplug your machine. 
 
•  Close the water tap. 
 
 
 
  
WATER INLET FILTERS  
  On the tap part of your machine’s wa ter inlet hose and at the ends of water 
inlet valves, there are filters to prevent entrance of the dirt and foreign 
materials in the water to  the machine. If the machine is unable to receive 
sufficient water although your water  tap is opened, these filters should be 
cleaned. 
 
 
 
 
 
 
   
   
 
    
   14 
 
 
 
 
 
 
 
						

							 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
MAX DRY LOAD CAPACITY (kg) 
PROGRAM  DETERGENT 
COMPART. ADDITIONAL FUNCTION 
BUTTON  ZWS165W TYPE OF LAUNDRY   EXPLANATIONS 1-COTTON 90
˚ 2 
 5 
Dirty, boil, cotton and linen 
textile  
2-COTTON 60
˚           
 (PREWASH)  1+2 
  5 
Very dirty, cotton, coloured 
and linen textile 
3-COTTON 60
˚ 2 
 5 
Dirty, cotton, coloured and 
linen textile 
4-COTTON 40
˚ 2 
 5 
Slightly dirty, paint to get 
out, cotton, coloured and 
linen textile  
5-ECO                      
   WASH 2 
  5 
Dirty, cotton, coloured and 
linen textile 
6-COTTON 30
˚ 2 
 5 
Slightly dirty, cotton, 
coloured and linen textile 
7-QUICK WASH 
2  
2,5 
Slightly dirty, cotton, 
coloured and linen textile 
8-COTTON          
   COLD  2 
  5 
Slightly dirty cotton, 
coloured and linen textile. 
Washed without heating the 
tap water. 
9-MIX     
    WASH 2 
  5 
Dirty or very dirty, stain , 
cotton, coloured and linen 
textile  Underwears, sheet, 
table cloth, t-shirt, 
shirt, towel  
10-SYNTHETIC 60
˚ 2 
 3 
Dirty, synthetic or synthetic 
mixture textile   Nylon socks, blouse  
11-BABY                
      WASH 
2 
  3 
Baby laundry 
All baby laundry 
12-SYNTHETIC 40˚ 2 
 3 
Slightly dirty, synthetic or 
synthetic mixture textile  Nylon socks, blouse  
 
TABLE-1 
15
 
						

							 
 
 
MAX DRY LOAD CAPACITY (kg) 
PROGRAM  DETERGENT 
COMPART.  ADDITIONAL FUNCTION 
BUTTON  ZWS165W TYPE OF LAUNDRY   EXPLANATIONS 13-SPORT      
      CLOTHES 
2 
 
3 
Sport clothes  All sport clothes and 
jeans 
14-SYNTHETIC      
      COLD 
2 
 
3 
Slightly dirty, synthetic or 
synthetic mixture sensitive 
laundry.Washed without 
heating the tap water.  Nylon socks, blouse 
15-CURTAIN        
      WASH 
1+2 
 
2 
Tulle and curtain as 
sensitive laundry  Tulle, curtain, diolen, 
dralon 
16-DELICATE 30˚
 2 
 
2 
Slightly dirty, cotton, 
coloured, synthetic or 
synthetic mixture sensitive 
laundry  
17-DELICATE        
      COLD  2 
 
2 
Very slightly dirty, cold 
water with to wash cotton, 
coloured, synthetic or 
synthetic mixture sensitive 
laundry  Silk mixture, shirt, 
blouse, polyester, 
poliamid, mixture 
textile 
18-HAND                   
     WASH 
2 
 
2 
Slightly dirty, wash in hand 
cotton, coloured, synthetic 
or synthetic mixture laundry  Hand wash to all 
laundry 
 
19-WOOL  30
˚ 2 
 
2 
Dirty, hand and machine to 
wash wool laundry 
20-WOOL COLD  2 
 
2 
Very slightly dirty, cold 
water, hand and machine to 
wash wool laundry  All wool laundry 
21-RINSING 
When you need an additional rinsing to be done to your clothes after the washing process, you can use this program for all kinds of clothes. 
22-SPINNING 
When you need an additional spinning to be done to your clothes a
fter the washing process, you can use this program for all kinds of 
clothes. 
23-DRAINING 
This program is used to drain  the dirty water inside after the wa shing process of your machine. If you want the water inside your machine to 
be drained before the program ends, you can use this program. 
TABLE-1 CONTINUE 
(*) You can use softeners in all programs (except spinning and draining programs) optionally. When you arrange the quantity of  the softener, comply with the
 warning of 
the softener producer. Fill your softener in its       (softener) compartment of the detergent drawer.
 
 
16
       
 
						

							 
 
 
 
 
•  Remove the water inlet hose. 
 
•  Remove the filters found on the water inlet valves by using a pincer 
and wash thoroughly with a brush. 
 
 
•   Clean the filters of the water inle t hoses located on the tap side by 
removing manually together with the seal. 
 
 
•  After you clean the filters, you can  fit them the same way as you have 
removed. 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
PUMP FILTER   
The pump filter system elongates the life  of your pump, which is used to drain 
the dirty water. It prevents lint to enter  the pump. Cleaning of your pump filter 
in every 2-3 months is recommended. To clean your pump filter: 
 
 
 
•  Open the kickplate’s cover, by pulling the handle. 
 
•  Before opening the filter cover,place a cup in front of the filter cover 
to prevent flow of the remaining water in the machine. 
 
 
•  Loosen the filter cover by rotating it counter clockwise and drain the 
water. 
 
 
 
•  Remove the foreign materials from the filter. 
  •  Check for the rotation of the pump manually. 
  •  After you have cleaned the pump, fit the filter cover by rotating 
clockwise. 
 
 
•  Put the kickplate cover into the place. 
  •  Do not forget that if you do not fit  in the filter cover properly, it will 
leak water.  
 
 
 
 
 
   
 
      
 
   17 
 
 
 
 
 
 
 
 
 
						

							 
         WARNING!     
Danger of being scalded! 
  Since the water inside the pump maybe hot, wait for it to cool.  
   
 
 
   
   
   
   
   
   
   
   
   
   
   
   
   
   
 
DETERGENT DRAWER   Detergents may form a sediment in your  detergent drawer or in housing of the 
detergent drawer in time. To clean the sediment, pull out the detergent drawer 
from time to time.To pull out the detergentdrawer: 
 
 
 
•  Pull the detergent drawer to the end.(DIAGRAM-1) 
 
•  Lift the front of the drawer, continue to pull until the drawer is pull 
out.(DIAGRAM-2) 
 
 
•  Wash will an old toothbrush and excessiveamount of water. 
 
•  Take off the leftover detergent avoid to drop into your machine. 
 
•  After drying the detergentdrawer put into the housing in the same manner 
you pull out. 
 
 
                                 
 
        
  
 
 
 
 
 
 
 
 
 
 
 
 
 
  
 
 
          DIAGRAM-1                      DIAGRAM-2 
 
 
 
 
 
 
 
 
 
 18 
 
 
 
 
 
 
 
 
 
 
 
 
						

							 
 
 SIPHON PLUG  Pull out the detrgent drawer. Remove the siphon plug and clean the residues 
of the softener thoroughly. Fit the cleaned  siphon plug in its location. Check if 
it placed properly. 
 
 
 
   THE CABINET 
 
Clean the exterior surface of the cabine t of your machine with lukewarm water 
and a cleaning substance that will not irritate the cabinet. After rinsing with 
clean water, wipe it with a soft and dry cloth. 
 
 
 
  
        WARNING!  
If the machine is installed in a location  where the ambient temperature can fall 
below 0  ˚C, do the following when it will not be in use: 
 
 
•  Plug in the machine. 
 
  •  Close the water tap and pull out the water inlet hose or hoses from 
the tap. 
 
 
•  Place the ends of the water drain and water inlet hoses in a cup on 
the ground. 
 
 
•  Adjust the program knob to “Draining” program. 
  •  The program ready light will be on. 
  •  Run the program by pre ssing the start/pause button. 
  •  Unplug your machine when the program is over (program end light is 
on). 
 
 
When you complete these proces, the  remaining water inside the machine will 
be drained and thus formation of ice in the machine will be prevented. When 
you operate your machine again, be sure  that the ambient temperature is 
above 0 ˚ C. 
 
 
 
 
THE DRUM  
  Do not leave metal parts like needles, staples or coins inside your machine. 
These pieces cause formation of rust st ains in the drum. To eliminate these 
stains of rust, use a cleaning substance without chlorium and follow the 
warnings of the cleaning substance pro ducer. For cleaning of the rust stains, 
never use dish-washing wires or similar rough objects. 
 
 
 
 
 
REMOVE OF LIME FROM YOUR MACHINE  
If you arrange the amount of the detergent you use in your machine properly, 
there will be no need for lime removal. Ho wever, if you desire to apply the 
removal procedure, use the lime protectors in the market and pay attention to 
their warnings. 
 
 
 
 
        WARNING!  
The lime eliminating substances contain acids and this may cause colour 
modifications in your clothes along wi th an adverse effect on your machine.  
 
 
 
 
 
 
   19