Zanussi Zwg 685 User Manual

Programme
Maximum and Minimum Temperature
Cycle Description
Maximum Spin Speed
Maximum Fabrics Load
Type of Laundry
OptionsDetergent
Compartment
EASY IRON
40°
Main wash - Rinses
Maximum spin speed at 800 rpm for model ZWG 685 (700 rpm
for model ZWG 5105)
Max. load 1 kg
Synthetic or mixed fabrics
Selecting this programme the laundry is gently washed and
spun to avoid any creasing. In this way ironing is easier. Fur-
thermore the machine will perform additional rinses.SPIN REDUCTION
RINSE HOLD
PREWASH...

Programme
Maximum and Minimum Temperature
Cycle Description
Maximum Spin Speed
Maximum Fabrics Load
Type of Laundry
OptionsDetergent
Compartment
SPORT INTENSIVE
40°
Prewash - Main wash - Rinses
Maximum spin speed at 800 rpm for model ZWG 685 (700 rpm
for model ZWG 5105)
Max. load 2.5 kg
This programme is suitable for washing heavily soiled sport
items. The machine will add automatically a prewash phase
before the main wash to eliminate mud stains. (For this phase
we recommend that you do not put...

Programme
Maximum and Minimum Temperature
Cycle Description
Maximum Spin Speed
Maximum Fabrics Load
Type of Laundry
OptionsDetergent
Compartment
SOAK
30°
Prewash - Soak for about 40 minutes - Stop with water in the
tub
Max. load 6 kg
Special programme for heavily soiled laundry. The machine
performs a soak at 30°C. At the end of this time the machine
will stop automatically with water left in the tub.
Before starting a new washing phase, it is necessary to empty
out the water by:
•Draining only : turn...

Programme
Maximum and Minimum Temperature
Cycle Description
Maximum Spin Speed
Maximum Fabrics Load
Type of Laundry
OptionsDetergent
Compartment
SPIN
Drain and long spin
Maximum spin speed at 800 rpm for model ZWG 685 (1000
rpm for model ZWG 5105)
Max. load 6 kg
Separate spin for hand washed cotton garments and after pro-
grammes with the Rinse Hold or Night Cycle option selected.
You can choose the spin speed by pressing the relevant button
to adapt it to the fabrics to be spun.SPIN REDUCTION 
 = OFF...

ProblemPossible cause/Solution
The machine does not fill:
The water tap is closed (the button 5 red light blinks).
• Open the water tap.
The inlet hose is squashed or kinked (the button 5 red light blinks).
• Check the inlet hose connection.
The filter in the inlet hose or the inlet valve filter are blocked (the button 5 red
light blinks).
• Clean the water inlet filters. (See Cleaning the water inlet filters for more
details).
The door is not properly closed (the button 5 red light blinks).
• Close the...

ProblemPossible cause/Solution
The door will not open:
The programme is still running.
• Wait the end of washing cycle.
The door lock has not been released.
• Wait a few minutes before opening the door.
There is water in the drum.
• Select drain or spin programme to empty out the water.
The machine vibrates is noisy:
The transit bolts and packing have not been removed.
• Check the correct installation of the appliance.
The support feet have not been adjusted
• Check the correct levelling of the...

Technical data
DimensionsWidth
Height
Depth60 cm
85 cm
63 cm
Electrical connectionInformation on the electrical connection is given on the rating plate, on the
inner edge of the appliance door.
Water supply pressureMinimum
Maximum0,05 MPa
0,8 MPa
Maximum LoadCotton6 kg
Spin SpeedMaximum800 rpm (ZWG 685)
1000 rpm (ZWG 5105)
Consumption values
ProgrammeEnergy consumption
(KWh)Water consumption (litres)Programme duration (Mi-
nutes)
White Cottons 95°2.061135
Cottons 60°1.358125
Cotton ECO 60° 1)1.0254160...

Remove the drawer by
pressing the catch down-
wards and by pulling it
out. Flush it out under a
tap, to remove any traces
of accumulated powder.To aid cleaning, the top
part of the additive com-
partment should be re-
moved.
Cleaning the drawer recess
Having removed the draw-
er, use a small brush to
clean the recess, ensuring
that all washing powder
residue is removed from
the upper and lower part of
the recess.
Replace the drawer and run the rinse programme with-
out any clothes in the drum.
Cleaning...

• Turn off the water tap.
• Unscrew the hose from
the tap.
• Clean the filter in the
hose with a stiff brush.
• Screw the hose back onto the tap. Make sure the
connection is tight.
• Unscrew the hose from the machine. Keep a rag
nearby because some water may flow.
• Clean the filter in the valve with a stiff brush or with
the piece of cloth.
35°
45°
• Screw the hose back to the machine and make sure
the connection is tight.
• Turn on the water tap.
Frost precaution
If the machine is exposed to...

After removing all the
packaging, carefully lay
machine on its back to re-
move the polystyrene base
from the bottom.Remove the power supply
cable and the hoses from
the hose holders on the
rear of the appliance.
Unscrew the three bolts.Slide out the relevant plas-
tic spacers.
Fill the smaller upper hole and the two large ones with
the corresponding plastic plug caps supplied in the bag
containing the instruction booklet.
Positioning
Install the machine on a flat hard floor. Make sure that air...