Zanussi Zwg 6100 P User Manual

• remove the filter and clean it under the tap;
• if necessary, place thefilter cover in the right
position again.
• open the filter cover and insert the filter
again;
The filter is inserted correctly when the indicator on its
top is visible and blocked.
• close the filter cover;
• insert the mains plugagain.
Cleaning the water inlet filters
Important!  If the appliance doesnt fill, it takes a long time
to fill with water, the starting button flashes red or the
display (if available) shows the relevant...

lights illuminates to indicate that the appliance is not
working.Before contacting your local Service Centre, please carry
out the checks listed below.
Fault code and malfunctionPossible cause / Solution
The light of button 6 flashes
and the light 7.1 illuminates:
Problem with the water supply
The water tap is closed.
• Open the water tap.
The inlet hose is squashed or kinked.
• Check the inlet hose connection.
The filter in the inlet hose or the inlet valve filter are blocked.
• Clean the water inlet...

Fault code and malfunctionPossible cause / Solution
The light of button 6 flashes
and the light 7.3 illuminates:
Door open
The door has not been closed or is not closed properly.
• Close firmly the door.
The appliance does not start or stops during operation
without any visible alarm.Before contacting your local Service Centre, please carry
out the checks listed below.
MalfunctionPossible cause / Solution
The appliance does not start:
The plug is not properly inserted in the power socket.
• Insert the...

MalfunctionPossible cause / Solution
The door will not open:
The programme is still running.
• Wait the end of washing cycle.
The door lock has not been released.
• Wait until the door lock is released.
There is water in the drum.
• Select drain or spin programme to empty out the water.
The appliance vibrates noisi-
ly:
The transit bolts and packing have not been removed.
• Check the correct installation of the appliance.
The appliance is not levelled correctly.
• Adjust the feet.
The laundry is not...

The necessary data for the service centre is on the rat-
ing plate. We recommend that you write the data here:
Mod. ... ... ...
Prod. No. ... ... ...
           Ser . No. ... ... ...
Mod.
 ..
. ...  ..
.
Prod. N o
.
 .. . ... ..
   
    
    
  
  
   
      
    
  S
er
.  No
. ... ... 
...
Model description
(MOD.) ...............................
Product number (PNC) ...............................
Serial number (S.N.) ...............................
  25
 

26 
 

 27
 

 www.zanussi.com/shop
   
192991971-A-052011