Zanussi Zwg 5100 P User Manual
Here you can view all the pages of manual Zanussi Zwg 5100 P User Manual. The Zanussi manuals for Washing Machine are available online for free. You can easily download all the documents as PDF.
Page 21
Programmes Load (kg) Energy consumption (kWh)Water consumption (litre)Approximate programme duration (minutes)Remaining moisture (%) 1) ZWG 580 P Remaining moisture (%) 1) ZWG 5100 P Remaining moisture (%) 1) ZWG 5120 P Standard cotton programmes Standard 60 °C cotton61.0754194666053 Standard 60 °C cotton30.7943172666053 Standard 40 °C cotton30.6143167666053 1) At the end of spin phase. Off Mode (W)Left On Mode (W) 0.650.65 Care and cleaning Warning! Switch the appliance off and re- move the mains plug...
Page 22
• Use a stiff brush to clean and remove all washing powder residue. • Clean all the removed parts of the dispens- er drawer under a tap to remove any traces of accumulated powder. • Use the previous brush to clean the recess, ensuring that upper and lower part of it is well cleaned. After having cleaned the dispenser and the drawer recess, replace it. Cleaning the drain filter The filter permits to hold fluff or foreign bodies left unawares in the laundry. The pump must be cleaned regularly. To clean the...
Page 23
The filter is inserted correctly when the indicator on its top is visible and blocked. • close the filter cov- er; • insert the mains plug again. Cleaning the water inlet filters Important! If the appliance doesn't fill, it takes a long time to fill with water, the starting button flashes red or the display (if available) shows the relevant alarm (see chapter "What to do if..." for more details), check if the water inlet filters are blocked . To clean the water inlet filters: • Turn off the...
Page 24
The light of button 6 flashes and the light 7.1 illuminates: Problem with the wa- ter supplyThe water tap is closed. • Open the water tap. The inlet hose is squashed or kinked. • Check the inlet hose connection. The filter in the inlet hose or the inlet valve filter are blocked. • Clean the water inlet filters (read "Cleaning the water inlet filters" for more details). The light of button 6 flashes and the light 7.2 illuminates: Problem with the wa- ter drainageThe drain hose is squashed or...
Page 25
The light of button 6 flashes and the light 7.3 illuminates: Door openThe door has not been closed or is not closed properly. • Close firmly the door. The appliance does not start or stops during operation without any visible alarm. Before contacting your local Service Centre, please carry out the checks listed below. MalfunctionPossible cause / Solution The appliance does not start: The plug is not properly inserted in the power socket. • Insert the plug into the power socket. There is no power at the...
Page 26
MalfunctionPossible cause / Solution The door will not open: The programme is still running. • Wait the end of washing cycle. The door lock has not been released. • Wait until the door lock is released. There is water in the drum. • Select drain or spin programme to empty out the water. The appliance vibrates noisily: The transit bolts and packing have not been removed. • Check the correct installation of the appliance. The appliance is not levelled correctly. • Adjust the feet. The laundry is not evenly...
Page 27
Mod. ... ... ... Prod. No. ... ... ... Ser. No. ... ... ... Mod. .. . ... ... Pr od. No . ... ... .. S er . N o . ... ... ... Model description (MOD.) ........................................ Product number (PNC) ............................................. Serial number (S.N.) ................................................. 27 www.zanussi.com