Zanussi Zwf 1431 S Manual

WASHING MACHINE
ZWF 1231 W - ZWF 1431 W
ZWF 1431 S - ZWF 1631 W

	





	

	
 	

	

	





	






 

!


	



#
$

#$


%&

(

INSTRUCTION BOOKLET132 983 870 GB
Quick Installation Guide:
visit our WEB SITE to view an install video
www.video.uk.electrolux.com 

2
Installation
●This appliance is heavy. Care should be taken when
moving it.
●It is dangerous to alter the specifications or attempt
to modify this product in any way.
●All packing and transit bolts must be removed before
use. Serious damage can occur to the product and to
property if this is not adhered to. See relevant section
in instructions.
●Any plumbing work required to install this appliance
should be carried out by a qualified plumber or
competent person.
●Any electrical work required to install...

3
Contents
For the User
Important Safety Information2
Your New Washing Machine4
Description of the Appliance5
Detergent dispenser drawer 5
Child safety feature 5
The Control Panel6-10
Turning the acoustic signal off 6
Operating Sequence11-13
Load the laundry 11
Measure out the detergent 11
Measure out the fabric softener 11
Switch the machine on 11
Select the required programme/fabric 11
Select the temperature 11-12
Select the spin speed or the Rinse Hold option 12
Select the desired options 12
Select...

4
Your New Washing Machine
Your new washing machine, which is fitted with the New Jet System, meets all modern
requirements for effective treatment of laundry with low water, energy and detergent
consumption. 
Even small loads are washed “economically” because the amount of water used is regulated
automatically according to the load and type of fabric.
●Automatic cooling of the wash water to 60°C
before draining, with the 95°C programme. This
reduces thermal shock to fabrics, helping to prevent...

5
Description of the Appliance
1 Detergent dispenser drawer
2 Control panel
3 Door opening handle
4 Drain pump
5 Adjustable feet
Detergent dispenser drawer
Prewash
Main wash
Fabric softener
Child safety feature
This machine incorporates a special child safety feature
to prevent small children from being trapped inside the
machine.
To activate this device, rotate the button (without
pressing it) inside the door clockwise until the groove is
horizontal. If necessary use a coin.
To disable this device and...

1 “On/Off” button
Press this button to switch the washing machine on.
The display (8) will show three flashing dashes or a
flashing zero. You will find more detailed explanations
on pages 7 & 8 (see “Display”).
Press the On/Off button again to switch the machine
off.
2 MAINS-ON light
This light is connected to the “On/Off” button. It lights
up when you press the button, and goes out when you
press it again.
3 FABRICS button
Press this button repeatedly to select the programme on
the basis of the type of...

7 • “Rinse Hold” position: 
when you choose this option, the machine will not drain
the water of the last rinse, so as not to crease the
laundry.
At the end of the cycle, the door is locked, the light of
the “Start/Pause” button goes out, a flashing zero will
appear on the display and the pilot light of “Rinse
Hold” position remains lit, to indicate that the water
must be drained and .
To complete the cycle, press “Skip Reset” button once,
all the leds are off, the display will show three flashing...

•Delay start, a time value indicated in hours and
selected by means of the relevant button (max 23
hours).
The delay time is displayed for 3 seconds, then the
duration of the selected programme reappears.
After you have pressed the “Start/Pause” button, the
delay time value displayed will decrease by units of
one hour every hour. When only two hours remain,
the display will decrease in 30 minute steps down to
zero.
You can delay the start of the selected programme by
up to 23 hours in one hour...

9
9 “Start/Pause” button
This button has two functions:
•Start: after you have selected the desired programme
and options, press this button to start the washing
machine. The light above the button will stop flashing
and remain lit.
If you have selected a delay time by means of the
“Delay” button, the countdown will begin and will be
shown on the display.
•Pause: when you press this button again, the
programme in progress is interrupted. The light above
the button will start flashing. To restart the...

10 To select Drainonly, press the “Skip” button three
times, the wash - rinses - spinLED,s go out.
The drainLED only remains alight.
11 “Delay” button
This button makes it possible to delay the starting of the
programme selected from 30 min - 60 min - 90 min, 2
hours and then by 1 hour up to a maximum of 23 hours.
The delay you have selected is shown on the display for
about 3 seconds; afterwards, the duration of the
programme reappears.
You must select this option afteryou have set the
programme and...