Zanussi Zwd 1471 S Manual

WASHER-DRYER
ZWD 1271 W
ZWD 1471 W
ZWD 1471 S

	




	
	








 





	

	
	
		
	


	


		
	
		
	

 	 

 	
	




			 
  



!





INSTRUCTION BOOKLET132985330GB
Quick Installation Guide:
visit our WEB SITE to view an install...

2
Installation
●This appliance is heavy. Care should be taken when
moving it.
●It is dangerous to alter the specifications or attempt
to modify this product in any way.
●All packing and transit bolts must be removed before
use. Serious damage can occur to the product and to
property if this is not adhered to. See relevant section
in instructions.
●Any plumbing work required to install this appliance
should be carried out by a qualified plumber or
competent person.
●Any electrical work required to install...

3
Contents
For the User
Important Safety Information2
Your New Washer-Dryer4
Description of the Appliance5
Detergent dispenser drawer 5
Child safety feature 5
The Control Panel6-10
Operating sequence11-14
Washing11
Load the laundry 11
Measure out the detergent 11
Measure out the fabric softener 11
Switch the machine on 11
Select the required programme/fabric 11
Select the temperature 12
Select the spin speed or the “Rinse Hold” option 12
Select the desired options 12
Select the “Delay” 12
Start the...

4
Your New Washer-Dryer
This new machine, which is fitted with the New Jet System, meets all modern requirements for
effective treatment of laundry with low water, energy and detergent consumption.
●The special wool programmewith its new delicate
wash system treats your woollens with extreme care.
●The balance control deviceensures that the
machine remains stable when spinning.
●Automatic cooling of the wash water to 60°C
before draining, with the 95°C programme. This
reduces thermal shock to fabrics,...

5
Description of the Appliance
1 Detergent dispenser drawer
2 Control Panel
3 Door opening handle
4 Drain pump
5 Adjustable feet
Detergent dispenser drawer
Prewash
Main wash
Fabric softener
Child safety feature
This machine incorporates a special child safety feature
to prevent small children from being trapped inside the
machine.
To activate this device, rotate the button (without
pressing it) inside the door clockwise until the groove is
horizontal. If necessary use a coin.
To disable this device and...

6
The Control Panel
4 “Temperature” button
Press this button repeatedly to increase or decrease the
temperature, if you want your laundry to be washed at a
temperature different from the one proposed by the
machine. The relevant light will light up.
Maximum temperatures are 95°C for Cottons and
“Cotton daily” programme, 60°C for Synthetics, 40°C
for delicate fabrics, Wool and fabrics to be hand-
washed (Wool / Handwashprogramme).
5 “Spin Speed” button
Press this button repeatedly to change the spin...

7 Then select a washing programme by means of the
“Fabrics” button. If you wish to drain and spin press
the “Skip/Reset” button in order to select the “Spin” or
“Drain” position.
You can select the spin speed by means of the relevant
button and then press press the “Start/Pause” button.
Important! 
If you accidentally press the “Skip/Reset”button more
than once, the display will show three blinking dashes.
To cause the washing machine to drain the water, select
any washing programme by means of the...

8 •
Duration of washing programmein hours and
minutes, after you have selected a programme.
While the programme is running (after you have
pressed the “Start/Pause” button), the displayed time
value decreases by one unit every minute.
• Selected drying timein minutes or hours and
minutes (max 130 mins). .
After the programme has started the time remaining is
updated every minute.
• The washing machine has stopped with water in
the tub, at the end of a programme with the “Rinse
Hold” option: this is...

9
10 “Start/Pause” button
This button has two functions:
•Start: after you have selected the desired programme
and options, press this button to start the machine. The
light above the button will stop flashing and remain lit.
If you have selected a delay time by means of the
“Delay” button, the countdown will begin and will be
shown on the display.
•Pause: when you press this button again, the
programme in progress is interrupted. The light above
the button will start flashing. To restart the
programme,...

10
12 “Delay” button
This button makes it possible to delay the starting of the
programme selected from 30 min - 60 min - 90 min, 2
hours and then by 1 hour up to a maximum of 23 hours.
The delay you have selected is shown on the display for
about 3 seconds; afterwards, the duration of the
programme reappears.
You must select this option afteryou have set the
programme and beforeyou press the “Start/Pause”
button.
The time value shown on the display will decrease by
one unit every hour.
You can change...