Zanussi Zrb 834 Nw User Manual

User manual
Fridge-Freezer
ZRB834NW
 

Contents
Safety information _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _  2
Operation _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _  4
First use _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _  4
Daily use _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _  4
How to use the EasyWater dispenser _ _ _ _ _ _ _  6
Helpful hints and tips _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _  7Care and cleaning _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _  8
What to do if… _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _  9
Technical data _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _  11...

• It is dangerous to alter the specifications or modify
this product in any way. Any damage to the cord may
cause a short-circuit, fire and/or electric shock.
Warning!  Any electrical component (power cord,
plug, compressor) must be replaced by a certified
service agent or qualified service personnel.
1. Power cord must not be lengthened.
2. Make sure that the power plug is not squashed
or damaged by the back of the appliance. A
squashed or damaged power plug may over-
heat and cause a fire.
3. Make sure...

Service
• Any electrical work required to do the servicing of
the appliance should be carried out by a qualified
electrician or competent person.
• This product must be serviced by an authorized
Service Centre, and only genuine spare parts must
be used.
Environment Protection
This appliance does not contain gasses which
could damage the ozone layer, in either its refrigerant
circuit or insulation materials. The appliance shall not
be discarded together with the urban refuse and rub-
bish. The insulation...

Place the fresh food to be frozen on the top compart-
ment.
Storage of frozen food
When first starting-up or after a period out of use, before
putting the products in the compartment let the appli-
ance run at least 2 hours on the higher settings.
Important!  In the event of accidental defrosting, for
example due to a power failure, if the power has been
off for longer than the value shown in the technical
characteristics chart under rising time, the defrosted
food must be consumed quickly or cooked...

2
1
How to use the EasyWater dispenser
Internal components:
3 2
1
1. Water tank
2. Tank lid
3. Valve and gasket
External components:
1
2
3
1. Dispenser
2. Water lever
3. Water drop tray
Initial operations to use your water dispenser
1. Remove every tape and other protection system
from the tank assembly
2. clean the components, as described into Water
dispenser cleaning procedure, in order to remove
eventual residue.
Water dispenser cleaning procedure
1. Unblock the two stopping elements on the sides of...

How to use the EasyWater dispenser
Refill the water tank
To fill the tank with cold
water, simply take a jug
of tap water and pour it
inside the tank through
the filler hole on the lid.Important! In order to
avoid risk of spillage of
water during closing and
opening of the refrigera-
tor, do not fill the water
tank above the maximum
fill level indication printed
within the tank.
Important information
• The fridge door valve hole must be closed with the
valve and the gasket during the regular functioning...

Butter and cheese: these should be placed in special
airtight containers or wrapped in aluminium foil or pol-
ythene bags to exclude as much air as possible.
Milk bottles: these should have a cap and should be
stored in the bottle rack on the door.
Bananas, potatoes, onions and garlic, if not packed,
must not be kept in the refrigerator.
Hints for freezing
To help you make the most of the freezing process,
here are some important hints:
• the maximum quantity of food which can be frozen
in 24 hrs. is...

at the back of the appliance, over the motor compres-
sor, where it evaporates.
It is important to periodically clean the defrost water
drain hole in the middle of the refrigerator compartment
channel to prevent the water overflowing and dripping
onto the food inside. Use the special cleaner provided,
which you will find already inserted into the drain hole.Defrosting of the freezer
The freezer compartment of this model, on the other
hand, is a no frost type. This means that there is no
buildup of frost...

ProblemPossible causeSolution
 Products prevent that water flows in-
to the water collector.Make sure that products do not touch
the rear plate.
Water flows on the ground.The melting water outlet does not
flow in the evaporative tray above the
compressor.Attach the melting water outlet to the
evaporative tray.
There is too much frost and
ice.Products are not wrapped properly.Wrap the products better.
 The door is not closed correctly.Refer to Closing the door.
 The Temperature regulator may be
set...