Zanussi Zht 630 X Manual
Have a look at the manual Zanussi Zht 630 X Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 276 Zanussi manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
11
INSTALLATION INSTRUCTIONS
It is dangerous to alter the specifications or attempt to modify this product in any way.
Technical InformationTechnical Information
DIMENSIONS HEIGHT: 150mm
WIDTH: 598mm
DEPTH: 498mm
WEIGHT GROSS: 8,5 kg
NET: 7,5 kg
ELECTRICAL SUPPLY: Voltage (50Hz) 220-240 V
POWER CONSUMPTION: 138W - 150W
FAN MOTOR: 110Wz
LAMP: 28W - 40W
SUITABLE FOR INSTALLATION
ABOVE: ELECTRIC HOB: 7KW (max)
GAS HOB: 10KW (max)
SLOT-IN GAS COOKER 13.5KW (max)
SLOT-IN ELECTRIC COOKER 12.4KW (max)
Note: CE Marking certifies that this appliance complies with the requirements laid
down in EEC directive 89:336. (Electromagnetic compatibility) and subsequent
modifications and Low Voltage directive 72/23/E.
ELECTRICAL CONNECTIONS
Electrical RequirementsAny permanent electrical installation must
comply with the latest I.E.E. Regulations and
local Electricity Board regulations. For your own
safety this should be undertaken by a qualified
electrician e.g. your local Electricity Board, or a
contractor who is on the roll of the National
Inspection Council for Electrical Installation
Contracting (NICEIC).
Electrical ConnectionBefore connecting to the mains supply ensure
that the mains voltage corresponds to the
voltage on the rating plate inside the cooker
hood.
This appliance is fitted with a 2 core mains cable
and must be permanently connected to the elec -
tricity supply via a double-pole switch having 3mm
minimum contact gap on each pole. A Switched
Fuse Connection Unit to BS.1363 Part 4, fitted
with a 3 Amp fuse, is a recommended mains sup -
ply connection accessory to ensure compliance
with the Safety Requirements applicable to fixed
wiring instructions.
This appliance conforms to BS 800: 1988 and
EEC Directive No. 78 308 regarding
suppression of radio and television
interference.
DOUBLE INSULATED DO NOT EARTH
12 INSTALLING THE COOKER HOOD Please ensure that when the appliance is installed it is easily accessible to an engineer in the event of a breakdown. All installations must comply with the local authorities requirements for the discharge of exhaust air. Incorrect installation may affect the safety of this cooker hood. Installation Requirements Before installation check the wall to which the cooker hood is to be fitted for electric cables, water pipes or gas. If it is necessary to fix the hood to a hollow construction plaster or partition board structure then it should be suffi- ciently reinforced to be quite rigid in the area of the cooker hood mounting brackets, and the appropriate rawl plugs used for this type of fixing (not supplied). DuctingThe ducting must be fire retardant 100mm (4ins) in dia-meter and the length should be no more than: • 3 metres with one 90° bend • 2 metres with two 90° bends Bends of more than 90° will reduce the efficiency of the hood and reduce the airflow. The clereance height between the inferior part of the cooker hood and the hob must be 650 mm ( some models can be fitted at a lower height from the hob, please refer to the installa- tion paragraph). UnpackingThe fittings supplied to install this cooker hood can be found with the instruction book inside the packaging and consists of the following: Ducting spigot Blanking plate Wall / suspended fixing template
18 The symbol on the product or on its packaging indicates that this product may not be treated as household waste. Instead it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product. For more detailed information about recycling of this product, please contact your local city office, your household waste disposal service or the shop where you purchased the product.
19 In the event of your appliance requiring service, or if you wish to purchase spare parts please contact your local Service Force Centre by telephoning: 08705 929929 Your telephone call will be automatically routed to the Service Force centre covering your post code area. For the address of your local Service Force Centre and further information about Service Force, please visit the website at www .serviceforce.co.ukBefore calling out an engineer, please ensure you read the details under the heading Something not working. When you contact the Service Force Centre you will need to give the following details: 1.Your name, address and post code 2. Your telephone number 3. Clear and concise details of the fault 4. The model and serial number (found on the rating plate) 5. The purchase date Please note that a valid purchase receipt or guarantee documentation is required for in-guarantee service calls. For Customer Service in Ireland please contact us at the address below: Zanussi Electrolux Group (Irl) Ltd Long Mile Road Dublin 12 Republic of Ireland Tel: + 353 (0)1 4090751 Email: [email protected] Customer Care Department For general enquiries concerning your Zanussi appliance or for further information on Zanussi products please contact our Customer Care Department by letter or telephone at the address below or visit our website at www .zanussi.co.uk Service and Spare Parts Customer Services Department Major Appliances Zanussi Addington W ay Luton Bedfordshire LU4 9QQ T el: 08705 727 727 * * calls to this number may be recorded for training purposes.
www.zanussi.com U kan toebehoren, verbruiksprodukten en onderdelen bestellen via onze webwinkel op: www.zanussi.be Vous pouvez commander des accessoires, consommables et pièces détachées via notre magasin online sur: www.zanussi.be Voor het on-line bestellen van accessoires, consumables en onderdelen gaat u naar de ’webwinkel’ op: www.zanussi.nl 436004873_04 - 110922