Zanussi Zfc 340 Waa User Manual

ENUser manual 2
ELΟδηγίες Χρήσης11
PTManual de instruções 22
Chest Freezer
Οριζόντιος καταψύκτης
Arca congeladora
ZFC340WAA
 

Contents
Safety instructions _ _ _ _ _ _ _ _ _ _ _ _ _ _  2
Operation _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _  4
Control panel _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _  4
First use _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _  5
Daily use _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _  5
Helpful hints and tips _ _ _ _ _ _ _ _ _ _ _ _ _  6Care and cleaning _ _ _ _ _ _ _ _ _ _ _ _ _ _  6
What to do if… _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _  7
Technical data _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _  9
Installation _ _ _ _ _ _ _ _ _ _ _ _ _ _ _...

• It is dangerous to alter the specifications or
modify this product in any way. Any damage
to the cord may cause a short-circuit, fire
and/or electric shock.
Warning! Any electrical component (pow-
er cord, plug, compressor) must be re-
placed by a certified service agent or qualified
service personnel to avoid hazard.
1. Power cord must not be lengthened.
2. Make sure that the power plug is not
squashed or damaged by the back of
the appliance. A squashed or damaged
power plug may overheat and cause a...

• This product must be serviced by an author-
ized Service Centre, and only genuine spare
parts must be used.
Environment Protection
This appliance does not contain gasses
which could damage the ozone layer, in ei-
ther its refrigerant circuit or insulation materials.
The appliance shall not be discarded togetherwith the urban refuse and rubbish. The insula-
tion foam contains flammable gases: the appli-
ance shall be disposed according to the appli-
cable regulations to obtain from your local au-...

High temperature alarm
An increase in the temperature in the freezer
(for example due to an power failure) is indica-
ted by switching on of the Alarm lightDuring the alarm phase, don't place food inside
the freezer.
When normal conditions are restored the Alarm
light will switch off automatically.
First use
Cleaning the interior
Before using the appliance for the first time,
wash the interior and all internal accessories
with lukewarm water and some neutral soap soas to remove the typical smell of a...

Helpful hints and tips
Hints for freezing
To help you make the most of the freezing
process, here are some important hints:
• the maximum quantity of food which can be
frozen in 24 hrs. is shown on the rating plate;
• the freezing process takes 24 hours. No fur-
ther food to be frozen should be added dur-
ing this period;
• only freeze top quality, fresh and thoroughly
cleaned, foodstuffs;
• prepare food in small portions to enable it to
be rapidly and completely frozen and to make
it possible...

To remove the frost, do these steps:
1. Switch off the appliance.
2. Remove any stored food, wrap it in several
layers of newspaper and put it in a cool
place.
3. Leave the lid open , remove the plug from
the defrost water drain and collect all de-
frost water on a tray. Use a scraper to re-
move ice quickly.
4. When defrosting is completed, dry the in-
terior thoroughly and refit the plug.
5. Switch on the appliance.
6. Set the temperature regulator to obtain the
maximum coldness and run the appliance...

ProblemPossible causeSolution
 Food placed in the appliance was
too warmAllow food to cool to room tempera-
ture before storing
 The temperature of the room that
contains the appliance is too high
for efficient operationTry to reduce the temperature in the
room where the appliance stands
The High temperature
alarm light is on.It is too warm inside the freezerRefer to "High Temperature Alarm"
 The cabinet has been recently
switched on and the temperature is
still too highRefer to "High...

ProblemPossible causeSolution
It is too cold inside the
freezerThe temperature is not set correct-
ly.Set a warmer temperature
The appliance does not
work at all. Neither cooling
nor lighting worksPlug is not connected to the mains
socket properlyConnect the mains plug properly
 Power does not reach the appli-
anceTry connecting another electrical de-
vice to the power outlet
 The appliance is not switched onSwitch on the appliance
 There is no voltage in the mains
socket (try to connect another ap-...

The manufacturer declines all responsibility if
the above safety precautions are not observed.
This appliance complies with the E.E.C. Direc-
tives.
Ventilation requirements
1. Put the freezer in horizontal position on a
firm surface. The cabinet must be on all
four feet.2. Make sure that the clearance between the
appliance and rear wall is 5 cm.
3. Make sure that the clearance between the
appliance and the sides is 5 cm.
The airflow behind the appliance must be suffi-
cient.
Environmental concerns
The...