Zanussi Zdts 101 User Manual
Here you can view all the pages of manual Zanussi Zdts 101 User Manual. The Zanussi manuals for Dishwasher are available online for free. You can easily download all the documents as PDF.
Page 21
Consumption values ProgrammeProgramme duration (in minutes)Energy consumption (in kWh)Water (litres) Rinse and Hold110,15 1) Test programme for Test Institutes Hints for test institutes Testing in accordance with EN 60704 must be carried out with appliance fully loaded and us- ing the test programme (see Consumption values). Test in accordance with EN 50242 must be carried out when the salt container and rinseaid dispenser have been filled with salt and rinse aid respectively and using the test pro-...
Page 22
cup racks: position ALower basket Installation WARNING! Any electrical and/or plumbing work required to install this appliance should be carried out by a qualified electrician and/or plumber or compe- tent person. Water connection WARNING! The dishwasher must not be connected to open water appliances or instantaneous water heat- ers. This dishwasher may be fed with either hot (max. 60°) or cold water. Nevertheless we ad- vise you a cold water supply. WARNING! Only use, for connection to the water...
Page 23
WARNING! The electrical cable for the safety valve is in the double-walled water inlet hose and is live. Therefore do not immerse the water inlet hose or the safety valve in water. Take care when installing the water inlet hose . Place the water inlet hose in such a way that it is always lower than the bottom edge of the safety valve.If the water inlet hose or the safety valve is damaged, remove the mains plug immediately. CAUTION! A water inlet hose with safety valve MUST only be replaced by your...
Page 24
Electrical connection CAUTION! Safety standards require the appliance to be earthed. Prior to using the appliance for the first time, ensure that the rated voltage and type of supply on the rating plate match that of the supply where the appliance is to be installed. The fuse rating is also to be found on the rating plate. Always plug the mains plug into a correctly in- stalled shockproof socket. Multi-way plugs, connectors and extension cables must not be used. This could constitute a fire hazard...