Zanussi Zdf 204 User Manual

User manual
Dishwasher
ZDF 204
 

Thank you for selecting our
appliance
We wish you lots of enjoyment with your new
appliance and we hope that you will consider
our brand again when purchasing household
appliances.
Please read this user manual carefully and
keep it throughout the product life cycle as a
reference document. The user manual should
be passed on to any future owner of the
appliance.
Contents
Safety information _ _ _ _ _ _ _ _ _ _ _ _ _  3
Control panel _ _ _ _ _ _ _ _ _ _ _ _ _ _ _  4
Washing programmes  _ _ _ _ _ _ _ _ _ _...

Safety information
In the interest of your safety and to ensure the
correct use, before installing and first using the
appliance, read this user manual carefully, in-
cluding its hints and warnings. To avoid
unnecessary mistakes and accidents, it is im-
portant to ensure that all people using the
appliance are thoroughly familiar with its opera-
tion and safety features. Save these instruc-
tions and make sure that they remain with the
appliance if it is moved or sold, so that everyone
using it through...

Installation
• Check your dishwasher for any transport
damage. Never connect a damaged ma-
chine. If your dishwasher is damaged con-
tact your supplier.
• All packaging must be removed before use.
• Any electrical and plumbing work required to
install this appliance must be carried out by
a qualified and competent person.
• For safety reasons it is dangerous to alter
the specifications or attempt to modify this
product in any way.
• Never use the dishwasher if the electrical
supply cable and water hoses...

Programme selector dial and On/Off switch• when in this position, the machine is switched off
(corresponding light off),
• when the marker on the dial corresponds with a
programme, the machine is switched on and a pro-
gramme is selected (programme selector indicator
light on)
Start/cancel button•
Starting the washing programme:
1. Select a washing programme.
2. Press the Start/Cancel button (corresponding
light on).
IMPORTANT!
Once the programme has started, if you want to
change the selection made you...

Indicator lights
Salt refillingIlluminates when special salt needs to be filled.
It can remain illuminated several hours after the salt
has been filled.
Washing programmes
ProgrammeHalf loadDegree of soilType of loadProgramme de-
scription
Intensive 70°Yes 1)Heavy soilCrockery, cutlery,
pots and pansPrewash
Main wash
2 intermediate rin-
ses
Final rinse
Drying
Normal 65°Yes 1)Normal soilCrockery, cutlery,
pots and pansPrewash
Main wash
1 intermediate rin-
ses
Final rinse
Drying
60° A 302)NoLight...

ProgrammeHalf loadDegree of soilType of loadProgramme de-
scription
Rinse and HoldNoAny.
Partial load (to be completed later in the
day).1 cold rinse (to
avoid food scraps
from sticking
together).
This programme
does not require the
use of detergent.
1) When the Half load button is pressed, the prewash phase will be automatically excluded. In this case the detergent dose for
the prewash phase is no longer necessary.
2) Ideal for washing a partially loaded dishwasher. This is perfect daily programme, made...

– Fill up the salt and rinse aid container.
– Adjust the water hardness setting to the
highest level and perform 1 normal washing
programme without loading any dishes.– Adjust the water hardness setting according
to the hardness of the water in your area.
– Adjust the rinse aid dosage
Set the water softener
The dishwasher is equipped with a water
softener designed to remove minerals and salts
from the water supply, which would have a det-
rimental or adverse effect on the operation of
the appliance.
The...

Setting the water softener manually (see table)
Set switch to position 1 or
2The water softener is factory set at position 2.
Setting the water softener electronically (see table)
The water softener is factory set at position 5.
The dishwasher must be switched off . 
Press and hold the start/cancel button and turn the
programme selector dial clockwise till the first pro-
gramme.
Keep the button pressed until the programme selector
indicator light and the start/cancel indicator light start...

Unscrew the cap.Only before filling with
salt for the first time, fill
the salt container with wa-
ter.Using the funnel provided,
pour in the salt until the
container is filled with salt.
Remove any trace of salt.Replace the cap tightly
turning it clockwise until it
stops with a click.IMPORTANT!
Immediately start a complete programme.
IMPORTANT!
Water will overflow from the container as salt is added.
IMPORTANT!
Top up the special salt when the light on the
control panel illuminates.
10