Zanussi Zdf 2020 User Manual

ENUser manual 2
Dishwasher
ZDF2020
 

Contents
Safety information _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _  2
Control panel _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _  3
Washing programmes _ _ _ _ _ _ _ _ _ _ _ _ _ _ _  4
Use of the appliance _ _ _ _ _ _ _ _ _ _ _ _ _ _ _  5
Setting the water softener _ _ _ _ _ _ _ _ _ _ _ _ _  5
Use of dishwasher salt _ _ _ _ _ _ _ _ _ _ _ _ _ _  6
Use of rinse aid _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _  7
Loading cutlery and dishes _ _ _ _ _ _ _ _ _ _ _ _  7
Use of detergent _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _  9Setting and...

• Do not change the specifications or modify this prod-
uct. Risk of injury and damage to the appliance.
• Do not use the appliance:
– if the mains cable or water hoses are damaged,
– if the control panel, worktop or plinth area are dam-
aged, that you can get access to the inner side of
the appliance.Contact your local Service Force Centre.
• Do not drill into the sides of the appliance to prevent
damage to hydraulic and electrical components.
Warning!  Carefully obey the instructions for
electrical and...

Indicator lights
Rinse aid1)Comes on when it is necessary to fill the rinse aid container. Refer to Use of
rinse aid.
1) When the salt and/or rinse aid containers are empty, the related indicator lights do not come on while a washing programme
operates.
Delay start button
Use the delay start button to delay the start of the washing
programme with an interval of 3 hours. Refer to the chapter
Setting and starting a washing programme.
Programme knob and on/off indicator light
• To set a washing programme,...

Consumption values
ProgrammeProgramme duration
(in minutes)Energy consumption
(in kWh)Water consumption
(in litres)
85-951,8-2,022-25
105-1151,5-1,723-25
300,99
130-1401,0-1,214-16
120,15
The pressure and temperature of the water, the var-
iations of power supply and the quantity of dishes
can change these values.
Use of the appliance
Refer to the following instructions for each step of pro-
cedure:
1. Make a check if the water softener level is correct for
the water hardness in your area. If necessary...

Water hardnessWater hardness setting
°dH°THmmol/lClarkemanuallyelectronically
15 - 1826 - 322,6 - 3,218 - 2214
11 - 1419 - 251,9 - 2,513 - 1713
4 - 107 - 180,7 - 1,85 - 1212
< 4< 7< 0,7< 511)11)
1) No use of salt required.
You must set the water softener manually and elec-
tronically.
Manual adjustment
The appliance is set at the factory at position 2.
12
Set switch to position 1 or
2.
Electronic adjustment
The water softener is set at the factory at level 5.
1. Press and hold the start/cancel button....

56
It is normal that water overflows from the salt con-
tainer when you fill it with salt.
Make sure that there is no grain of salt outer of the
salt compartment. Salt which stays on the tank for
a while drills the tank. It is recommended to start a wash-
ing programme immediately after you fill the salt con-
tainer. This prevents of corrosion because of spilled salt.
When you set electronically the water softener to level 1,
the salt indicator light does not stay on.
Use of rinse aid
Caution!  Only use...

• While you load cutlery and dishes, do these steps:
– Load hollow items (e.g. cups, glasses and pans)
with the opening down.
– Make sure that water does not collect in the con-
tainer or in a deep base.
– Make sure that cutlery and dishes do not lie inside
one another.
– Make sure that cutlery and dishes do not cover other
cutlery and dishes.
– Make sure that glasses do not touch other glasses.
– Put small objects in the cutlery basket.
• Plastic items and pans with non-stick coatings can
keep water...

Maximum height of the dishes in :
 upper basketlower basket
Upper position20 cm31 cm
Lower position24 cm27 cm
12
Do these steps to move the upper basket to the upper or
lower position:
1. Move the front runner stops (A) out.
2. Pull the basket out.
3. Put the basket in the upper or lower position.
4. Replace the front runner stops (A) in their initial po-
sition.
Caution!  If the basket is in the upper position, do
not put cups on the cup racks.
Use of detergent
Only use detergents (powder, liquid or...

• rinse aid
• other cleaning agents.
Do these steps to use detergent tablets:
1. Make sure that the detergent tablets are applicable for
your water hardness. Refer to the instructions from
the manufacturer.
2. Set the lowest levels of water hardness and rinse aid
dosage.
It is not necessary to fill the salt container and the
rinse aid dispenser.
Do these steps when the drying results are not
satisfactory:
1. Fill the rinse aid dispenser with rinse aid.
2. Set the rinse aid dosage to position 2.
Do these...