Zanussi Fcs 1020 C User Manual

							Washing programmes
Programme/ TemperatureType of laundryOptionsDescription of the pro-
gramme
COTTON
90°White cotton (heavily
soiled cotton items)
SPIN REDUCTION/NO
SPIN/RINSE HOLD
EXTRA QUICK/QUICK 
1)
PREWASH
ECONOMY
SUPER RINSE
Main wash
Rinses
Long spin max. 1000 rpm
Max load 3 kg
COTTON
60° - COLDColoured cotton (normally
soiled cotton items)
SPIN REDUCTION/NO
SPIN/RINSE HOLD
EXTRA QUICK/QUICK 
1)
PREWASH
ECONOMY
SUPER RINSE
Main wash
Rinses
Long spin max. 1000 rpm
Max load 3 kg
SYNTHETIC
60°-30°
Synthetic or mixed fab-
rics: underwear, coloured
garments, non-shrink
shirts, blouses.
SPIN REDUCTION/NO
SPIN/RINSE HOLD
EXTRA QUICK/QUICK 
1)
PREWASH
ECONOMY
SUPER RINSE
Main wash
Rinses
Short spin max. 900 rpm
Max Load 1,5 kg
DELICATE
40°-30°Delicate fabrics: acrylics,
viscose, polyester.
SPIN REDUCTION/NO
SPIN/RINSE HOLD
QUICK 
1)
PREWASH
SUPER RINSE
Main wash
Rinses
Short spin max. 700 rpm
Max Load 1,5 kg
WOOL 
30°-COLD
Washing programme for
machine washable wool as
well as for hand washable
woollens and delicate fab-
rics.
SPIN REDUCTION/NO
SPIN/RINSE HOLD
Main wash
Rinses
Short spin max. 900 rpm
Max Load 1 kg
RINSES 
With this programme it is
possible to rinse and spin
cotton garments which
have been washed by hand.
The machine performs 3
rinses, followed by a final
long spin. The spin speed
can be reduced.
SPIN REDUCTION/NO
SPIN/RINSE HOLD
SUPER RINSERinses
Spin max. 1000 rpm
Max Load 3 kg
DRAIN 
For emptying out the water
of the last rinse in pro-
grammes with the Rinse
Hold option selected.
 Draining of water
Max Load 3 kg
 11
 
						

							Programme/ TemperatureType of laundryOptionsDescription of the pro-
gramme
SPIN 
Separate spin for hand
washed garments and after
programmes with the Rinse
Hold option selected. You
can choose the spin speed
by turning the spin speed
selector to adapt it to the
fabrics to be spun.
SPIN REDUCTION
Drain and long spin
Max. spin speed 1000 rpm
Max Load 3 kg
 / OFF
For resetting the pro-
gramme or switching the
machine off
  
1) If you select this option, we recommend that you reduce the maximum load. Recommended load for cotton is 2 kg.
Care and cleaning
Important!  You must DISCONNECT the appliance from
the electricity supply, before you can carry out any
cleaning or maintenance work.
Descaling
The water we use normally contains lime. It is a good idea
to periodically use a water softening powder in the ma-
chine. Do this separately from any laundry washing, and
according to the softening powder manufacturers in-
structions. This will help to prevent the formation of lime
deposits.
Maintenance Wash
With the use of low temperature washes it is possible to
get a build up of residues inside the drum.
We recommend that a maintenance wash be performed
on a regular basis.
To run a maintenance wash:
• The drum should be empty of laundry.
• Select the hottest cotton wash programme.
• Use a normal measure of detergent, must be a powder
with biological properties.
External cleaning
Clean the exterior cabinet of the appliance with soap and
water only, and then dry thoroughly.
Cleaning the dispenser drawer
The washing powder and additive dispenser drawer
should be cleaned regularly.
If necessary, the whole de-
tergent drawer can be tak-
en out of the machine for
cleaning. You need to pull
it firmly outwards, so that
it comes free of retaining
stop.To remove the siphon at
the inside edge of the
drawer for cleaning, you
need to press it inwards
and pull it upwards at the
same time. Flush it out un-
der a tap, to remove any
traces of accumulated
powder. When you put it
back, press it downwards
until you hear a distinct
click.
12
 
 
						

							Cleaning the drawer recess
Having removed the draw-
er, use a small brush to
clean the recess, ensuring
that all washing powder
residue is removed from
the upper and lower part of
the recess.
Replace the drawer and run the rinse programme with-
out any clothes in the drum.
Cleaning the water inlet filter
If your water is very hard or contains traces of lime deposit,
the water inlet filter may become clogged. It is therefore
a good idea to clean it from time to time.
Turn off the water tap. Un-
screw the water inlet hose.
Clean the filter using a
hard bristle brush. Tighten
up the inlet hose.
The dangers of freezing
If the machine is exposed to temperatures below 0°C,
certain precautions should be taken.
• Turn off the water supply.
• Unscrew the inlet hose from the supply tap.
• Select a wash programme, start the machine and let
the programme run for a short time.
• Interrupt the programme by turning the programme
selector to 
 position.
• Place the end of inlet and drain hoses down low, into
the waste gully (floor drain) set into the floor. Make
sure that the end of the hose does not go below the
water level in the gullys (drains) water tap.
• Select the programme Drain and let it run until it is
finished.
•
Turn the programme selector to 
 position. When
you intend to start the machine up again, make sure
that the room temperature is above 0 °C.
The appliance is only to be used and stored indoors at
normal room temperature. The manufacturer is not re-
sponsible for any frost damage.
What to do if…
Certain problems are due to lack of simple maintenance
or oversights, which can be solved easily without calling
out an engineer. Before contacting your local Service
Centre, please carry out the checks listed below.
During machine operation it is possible that the End pilot
light blinks to indicate that the machine is not working:
•1 flash: problem with the water supply.•2 flashes: problem with the water draining.
•4 flashes: door open.
Once the problem has been eliminated, press the button
START to restart the programme. If after all checks, the
problem persists, contact your local Service Centre.
 13
 
						

							ProblemPossible cause/Solution
The machine does not start:
The door has not been closed.
• Close the door firmly.
The plug is not properly inserted in the power socket.
• Insert the plug into the power socket.
There is no power at the socket.
• Please check your domestic electrical installation.
The main fuse has blown.
• Replace the fuse.
The selector dial is not correctly positioned and the button Start has not been
pressed.
• Please turn the selector dial and press the button Start again.
The machine does not fill:
The water tap is closed.
• Open the water tap.
The inlet hose is squashed or kinked.
• Check the inlet hose connection.
The filter in the inlet hose is blocked.
• Clean the water inlet hose filter.
The door is not properly closed.
• Close the door firmly.
The machine fills then empties im-
mediately:The end of the drain hose is too low.
• Refer to relevant paragraph in «Installation» chapter.
The machine does not empty and/or
does not spin:
The drain hose is squashed or kinked.
• Check the drain hose connection.
An option or a programme that ends with the water still in the tub or that
eliminates all the spinning phases has been selected.
• Select the draining or spinning programme.
The laundry is not evenly distributed in the drum.
• Redistribute the laundry.
There is water on the floor:
Too much detergent or unsuitable detergent (creates too much foam) has been
used.
• Reduce the detergent quantity or use another one.
Check whether there are any leaks from one of the inlet hose fittings. It is not
always easy to see this as the water runs down the hose; check to see if it is
damp.
• Check the water inlet hose connection.
The drain or inlet hose is damaged.
• Change it with a new one.
14
 
 
						

							ProblemPossible cause/Solution
Unsatisfactory washing results:
Too little detergent or unsuitable detergent has been used.
• Increase the detergent quantity or use another one.
Stubborn stains have not been treated prior to washing.
• Use commercial products to treat the stubborn stains.
The correct temperature was not selected.
• Check if you have selected the correct temperature.
Excessive laundry load.
• Reduce the laundry load.
The door will not open:
The programme is still running.
• Wait the end of washing cycle.
The door lock has not been released.
• Wait until the indicator light for door locked has gone out.
There is water in the drum.
• Select drain or spin programme to empty out the water.
The machine vibrates is noisy:
The transit bolts and packing have not been removed.
• Check the correct installation of the appliance.
The support feet have not been adjusted
• Check the correct levelling of the appliance.
The laundry is not evenly distributed in the drum.
• Redistribute the laundry.
Maybe there is very little laundry in the drum.
• Load more laundry.
Spinning starts late or the machine
does not spin:
The electronic unbalance detection device has cut in because the laundry is
not evenly distributed in the drum. The laundry is redistributed by reverse
rotation of the drum. This may happen several times before the unbalance
disappears and normal spinning can resume. If, after 10 minutes, the laundry
is still not evenly distributed in the drum, the machine will not spin. In this
case ,redistribute the load manually and select the spin programme.
• Redistribute the laundry.
The load is too small.
• Add more items, redistribute the load manually and then select the spinning
programme.
No water is visible in the drum:Machines based on modern technology operate very economically using very
little water without affecting performance.
If you are unable to identify or solve the problem, contact
our service centre. Before telephoning, make a note of the
model, serial number and purchase date of your machine:
the Service Centre will require this information.
 15
 
						

							Mod. ... ... ...
Prod. No. ... ... ...
          Ser. No. ... ... ...
Technical data
DimensionsWidth
Height
Depth67 cm
49,5 cm
51,5 cm
Electrical connection
Voltage - Overall power - FuseInformation on the electrical connection is given on the rating plate, on the
inner edge of the appliance door.
Water supply pressureMinimum
Maximum0,05 MPa
0,8 MPa
Maximum LoadCotton3 kg
Spin SpeedMaximum1000 rpm
Consumption values
ProgrammeEnergy consumption
(KWh)Water consumption (litres)Programme duration (Mi-
nutes)
White Cottons 90°1.4344~ 126
Cottons 60°0.7844~ 107
Cotton + ECO  option 60°1)0.5739~ 130
Synthetic 60°0.5742~ 82
Synthetic 40°0.2642~ 67
Delicate 40°0.3845~ 61
Wool 30°0.2045~ 45
Rinses0.0327~ 26
Drain--~ 1
16
 
 
						

							ProgrammeEnergy consumption
(KWh)Water consumption (litres)Programme duration (Mi-
nutes)
Spin--~ 5
1) «Cottons + Eco option» at 60°C with a load of 3 kg is the reference programme for the data entered in the energy label, in compliance
with EEC 92/75 standards.
The consumption data shown on this chart is to be considered purely indicative, as it may vary depending on
the quantity and type of laundry, on the inlet water temperature and on the ambient temperature.
Installation
Lifting the machine
Be careful when lifting the machine. Incorrect methods of
lifting can cause physical injuries and also increase the
risk of damage to the machine. Open the door and take
hold of the top inside of the door opening. You can also
lift the machine by gripping the rear overhang of the top.
Warning!  Never lift the machine by gripping it’s
control panel, door, or detergent dispenser.
Unpacking
When supplied the washing machine is packed using a
number of locking devices/packing pieces to prevent
drum and motor from damage in transit All transit bolts
and packing must be removed before using the appliance.
You are advised to keep all transit devices so that they
can be refitted if the machine ever has to be transported
again.
Spread some of the poly-
styrene packaging materi-
als on the floor behind the
machine and then lay the
machine carefully rear
side down on them. Make
sure that no hoses are
crushed in the process.Remove the polystyrene
base and the plastic sup-
port bar which the ma-
chine rests on.
Return machine to its upright position and remove the
power supply cable and the draining and inlet hose from
the hose holders on the rear of the appliance.
 17
 
						

							With a suitable spanner unscrew and remove the three
screws and their spacers on machines rear.
The three holes must then
be plugged with the plastic
plug caps supplied in the
bag containing the in-
struction booklet, which
can be found inside the
drum.
Positioning
Install the machine on a flat hard floor. Make sure that air
circulation around the machine is not impeded by carpets,
rugs etc. Check that the machine does not touch the wall
or furniture. Level the washing machine by raising or
lowering the two front feet. If necessary, check the setting
with a spirit level. Any necessary adjustment can be made
with a spanner. Accurate levelling prevents vibration,
noise and displacement of the machine during operation.
Caution!  Never place cardboard, wood or similar
materials under the machine to compensate for any
unevenness in the floor.
Water inlet
Warning!  This appliance must be connected to a
cold water supply
Caution!  Before connecting up the appliance to new
pipework or to pipework that has not been used for
some time, run off a reasonable amount of water to flush
out any debris that may have collected
Caution!  Do not use the hose from your previous
appliance to connect to water supply.
Connect the hose to a tap
with a 3/4” thread. Always
use the hose supplied with
the appliance.
The machine end of the in-
let hose can be turned in
any direction. Set the hose
correctly by loosening the
ring nut. After positioning
the inlet hose, be sure to
tighten the ring nut again
to prevent leaks.
The inlet hose must not be lengthened. If it is too short
and you do not wish to move the tap, you will have to
purchase a new, longer hose specially designed for this
type of use.
Water drainage
The end of the drain hose can be positioned in three ways:
Hooked over the edge of a sink using the plastic hose
guide supplied with the machine.
In this case, make sure the end cannot come unhooked
when the machine is emptying. This could be done by
tying it to the tap with a piece of string or attaching it to
the wall.
In a sink drain pipe with a trap.
18
 
 
						

							650-800 mm
The drain hose can be connected directly into the pipe
(e.g. beneath a washtub or sink), above the water trap. The
drain hose must be arranged so that some part of it’s
length is routed up to a level corresponding to the top
edge of the tub and fixed in place there.
Directly into a drain pipe at a height of not less than 65
cm and not more than 80 cm.
Their must be an air gap around and below the end of
drain hose. This means that the internal diameter of the
standpipe must be larger than the outer diameter of the
hose.
650-800 mm 40 mm
The hose must not be sticked into the standpipe more than
50 mm and it has to be fixed in this position. The drain
hose must not be kinked.
The drain hose can be extended up to total 3,5 m. For the
extension piece use a hose with an internal diameter at
least as large as that of the machines own hose. Use a
suitable hose connector.
Information on the electrical connection is given on the
rating plate on the inner edge of the appliance door.
Check that your domestic electrical installation can take
the maximum load required, also taking into account any
other appliances in use.
Caution!  Connect the machine to an earthed socket.
Caution!  The manufacturer does not accept any
responsibility for damage or injury through failure
to comply with the above safety precaution.
Caution!  The power supply cable must be easily
accessible after installing the machine.
Caution!  Should the appliance power supply cable
need to be replaced, this must be carried out by a
Service Centre.
Environment concerns
The symbol    on the product or on its packaging
indicates that this product may not be treated as
household waste. Instead it should be taken to the
appropriate collection point for the recycling of electrical
and electronic equipment. By ensuring this product is
disposed of correctly, you will help prevent potential
negative consequences for the environment and human
health, which could otherwise be caused by inappropriatewaste handling of this product. For more detailed
information about recycling of this product, please
contact your local council, your household waste disposal
service or the shop where you purchased the product.
Packaging materials
The materials marked with the symbol  are recyclable.
>PEPS
						

							>PP