Yamaha Yzf R1 2007 Manual

SPECIAL TOOLS
1-15
EAS20260
SPECIAL TOOLS
The following special tools are necessary for complete and accurate tune-up and assembly. Use 
only the appropriate special tools as this will help prevent damage caused by the use of inappropri-
ate tools or improvised techniques. Special tools, part numbers or both may differ depending on the 
country.
When placing an order, refer to the list provided below to avoid any mistakes.
NOTE:
 For U.S.A. and Canada, use part number starting with “YM-”, “YU-”, or...

SPECIAL TOOLS
1-16
Steering nut wrench
90890-01403
Spanner wrench
YU-339753-28, 4-61
Damper rod holder
90890-01423
Damping rod holder
YM-014234-53, 4-54
Oil filter wrench
90890-01426
YU-384113-12
Rod holder
90890-01434
Damper rod holder double ended
YM-014344-52, 4-57
Rod puller
90890-01437
Universal damping rod bleeding tool set
YM-A87034-56, 4-57 Tool name/Tool No. IllustrationReference
pages
YM-A8703 

SPECIAL TOOLS
1-17
Rod puller attachment (M12)
90890-01435
Universal damping rod bleeding tool set
YM-A87034-56, 4-57
Fork spring compressor
90890-01441
YM-014414-52, 4-57
Fork seal driver
90890-01442
Adjustable fork seal driver (36–46 mm)
YM-014424-55
Vacuum gauge
90890-03094
Carburetor synchronizer
YU-444563-7
Compression gauge
90890-03081
Engine compression tester
YU-332233-10 Tool name/Tool No. IllustrationReference
pages
YM-A8703
YU-44456 

SPECIAL TOOLS
1-18
Extension
90890-041363-10
Valve spring compressor
90890-04019
YM-040195-23, 5-29
Valve spring compressor attachment
90890-04108
Valve spring compressor adapter 22 mm
YM-041085-23, 5-29
Middle driven shaft bearing driver
90890-04058
Bearing driver 40 mm
YM-040586-11
Mechanical seal installer
90890-04078
Water pump seal installer
YM-33221-A6-11
Universal clutch holder
90890-04086
YM-910425-47, 5-51
Valve guide remover (ø5)
90890-04097
Valve guide remover (5.0 mm)
YM-040975-25 Tool...

SPECIAL TOOLS
1-19
Valve guide remover (ø4.5)
90890-04116
Valve guide remover (4.5 mm)
YM-041165-25
Valve guide installer (ø5)
90890-04098
Valve guide installer (5.0 mm)
YM-040985-25
Valve guide installer (ø4.5)
90890-04117
Valve guide installer (4.5 mm)
YM-041175-25
Valve guide reamer (ø5)
90890-04099
Valve guide reamer (5.0 mm)
YM-040995-25
Valve guide reamer (ø4.5)
90890-04118
Valve guide reamer (4.5 mm)
YM-041185-25
Ignition checker
90890-06754
Opama pet-4000 spark checker
YU-344878-92
Yamaha bond...

SPECIAL TOOLS
1-20
Pivot shaft wrench adapter
90890-014765-7
Pocket tester
90890-03112
Analog pocket tester
YU-03112-C1-14, 5-41, 8-
83, 8-84, 8-85, 
8-88, 8-89, 8-
90, 8-91, 8-92, 
8-93, 8-94, 8-
95, 8-96, 8-97, 
8-97, 8-98, 8-
99, 8-100
Oil pressure adapter H
90890-031393-13
Valve lapper
90890-04101
Valve lapping tool
YM-A89983-5
Fuel pressure adapter
90890-03176
YM-031767-6
Pressure gauge
90890-03153
YU-031533-13, 7-6
Camshaft wrench
90890-04143
YM-041435-11, 5-16 Tool name/Tool No....

SPECIAL TOOLS
1-21
Ring nut wrench
90890-01507
YM-015074-68, 4-70
Damper rod holder (22 mm)
90890-013654-69, 4-70 Tool name/Tool No. IllustrationReference
pages 

SPECIFICATIONS
GENERAL SPECIFICATIONS...................................................................... 2-1
ENGINE SPECIFICATIONS .......................................................................... 2-2
CHASSIS SPECIFICATIONS ........................................................................ 2-8
ELECTRICAL SPECIFICATIONS ............................................................... 2-10
TIGHTENING TORQUES ............................................................................ 2-12...

GENERAL SPECIFICATIONS
2-1
EAS20280
GENERAL SPECIFICATIONS
Model
Model 4C86
 
Dimensions
Overall length 2060 mm (81.1 in)
Overall width 720 mm (28.3 in)
Overall height 1110 mm (43.7 in)
Seat height 835 mm (32.9 in)
Wheelbase 1415 mm (55.7 in)
Ground clearance 135 mm (5.31 in)
Minimum turning radius 3400 mm (133.9 in)
 
Weight
With oil and fuel 200 kg (441 lb)
Maximum load 195 kg (430 lb)
  

ENGINE SPECIFICATIONS
2-2
EAS20290
ENGINE SPECIFICATIONS
Engine
Engine type Liquid cooled 4-stroke, DOHC
Displacement 998.0 cm³
Cylinder arrangement Forward-inclined parallel 4-cylinder
Bore × stroke 77.0 × 53.6 mm (3.03 × 2.11 in)
Compression ratio 12.70 :1
Standard compression pressure (at sea level) 1480 kPa/350 r/min (210.5 psi/350 r/min) (14.8
kgf/cm²/350 r/min)
Starting system Electric starter
 
Fuel
Recommended fuel Premium unleaded gasoline only
Fuel tank capacity 18.0 L (4.76 US gal) (3.96...