Yamaha Yros 3 Owners Manual

8 8
Mixing Console – Editing the Volume and Tonal Balance –
Tyros3  Reference Manual  •91
Song Auto Revoice
This feature lets you use the high-quality sounds of the Tyros3 to full advantage with XG-compatible song data. 
When you play back any commercially available XG song data or that created on other instruments, you can use 
Auto Revoice to automatically assign the specially created Voices of the Tyros3 (Live!, Cool!, etc.) instead of the con-
ventional XG Voices of the same type. 
1Press the [G]...

8 8
Mixing Console – Editing the Volume and Tonal Balance –
92•  Tyros3  Reference Manual
Editing FILTER Parameters
[D]/[I] HARMONIC 
CONTENTAllows you to adjust the resonance effect (page 13) for each part.
[E]/[J] BRIGHTNESS Determines the brightness of the sound for each part by adjusting the cutoff 
frequency (page 13).
Editing TUNE Parameters
[A]/[B]/
[F]/[G]PORTAMENTO 
TIMEPortamento is a function that creates a smooth transition in pitch from the 
first note played on the keyboard to the next. The...

8 8
Mixing Console – Editing the Volume and Tonal Balance –
Tyros3  Reference Manual  •93
Selecting an Effect type and Creating a User Effect
1Press the [F] (TYPE) button in the EFFECT Page of the Mixing Con-
sole display.
The Effect Type Selection display is called up.
Editing EFFECT Parameters
[F] TYPE Selects the desired effect type. See below.
[B]/[C]/
[G]/[H]REVERB Adjusts the amount of the Reverb sound for each part or channel.
[D]/[I] CHORUS Adjusts the amount of the Chorus sound for each part or...

8 8
Mixing Console – Editing the Volume and Tonal Balance –
94•  Tyros3  Reference Manual
2Use the [1 ▲▼]/[2 ▲▼] buttons to select the effect BLOCK.
3Use the [3 ▲▼]/[4 ▲▼] buttons to select the part to which you want to 
apply the effect.
Please note that a part cannot be selected if the selected block is REVERB, 
CHORUS or DSP1.
4Use the [5 ▲▼]/[6 ▲▼] button to select the effect CATEGORY.
5Use the [7 ▲▼]/[8 ▲▼] button to select the effect TYPE.
6If you want to edit the effect parameters, press the [F]...

8 8
Mixing Console – Editing the Volume and Tonal Balance –
Tyros3  Reference Manual  •95
8Select one of the parameters you want to edit by using the [4 ▲▼]/[5 
▲▼] buttons, then adjust the value by using the [6 ▲▼]/[7 ▲▼] but-
tons.
If you have selected the REVERB, CHORUS or DSP1 effect block in step 2, you 
can adjust the Effect Return Level by pressing [8 ▲▼] button.
To re-select the Effect block, category and type, use the [1 ▲▼]–[3 ▲▼] but-
tons. The re-selected effect configuration is displayed at...

8 8
Mixing Console – Editing the Volume and Tonal Balance –
96•  Tyros3  Reference Manual
Equalizer (also called “EQ”) is a sound processor that divides the frequency spectrum 
into multiple bands that can be boosted or cut as required to tailor the overall fre-
quency response. Usually an equalizer is used to correct the sound from speakers to 
match the special character of the room. For example, you can cut some of the low 
range frequencies when playing in large spaces where the sound is too “boomy,”...

8 8
Mixing Console – Editing the Volume and Tonal Balance –
Tyros3  Reference Manual  •97
Editing and Saving the Selected EQ
1Press the [F] (EDIT) button in the EQ Page of the Mixing Console dis-
play.
The MASTER EQ EDIT display is called up.
2Use the [A]/[B] buttons to select a preset EQ type.
The set parameters of the selected EQ type are automatically shown at the bot-
tom of the display.
3Use the [3 ▲▼]–[7 ▲▼] buttons or sliders to boost or cut each of the 
five bands.
Use the [8 ▲▼] buttons to boost...

8 8
Mixing Console – Editing the Volume and Tonal Balance –
98•  Tyros3  Reference Manual
Line Out Settings
[F] DRUM&PERC./
PANELSwitches the displayed menu: PANEL parts or DRUM & PERCUSSION instru-
ments.
[1 ▲▼]–
[3 ▲▼]PART
(PANEL Page)Selects the desired part/drum instrument.
[1 ▲▼]/
[2 ▲▼]INSTRUMENTS
(DRUM & PER-
CUSSION Page)
[3 ▲▼]DEPEND ON PART
(DRUM & PER-
CUSSION Page)Checking here, the selected drum instrument will be output via the jacks set 
from the PANEL page at left.
[4 ▲▼]MAIN Checking...

9 9
Internet Direct Connection – Connecting the Tyros3 Directly to the Internet –
Tyros3  Reference Manual  •99
Internet Direct Connection
– Connecting the Tyros3 Directly to the Internet –
Contents
Registering Bookmarks of Your Favorite Pages  . . . . . . . . . . . 99
• Editing Bookmarks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100
About the Internet Settings Display (BROWSER) . . . . . . . . . 101
You can “bookmark” the page you’re viewing, and set up a custom link so the...

9 9
Internet Direct Connection – Connecting the Tyros3 Directly to the Internet –
100•  Tyros3  Reference Manual
Editing Bookmarks
From the Bookmark display, you can change the names and rearrange the order of your bookmarks, as well as 
delete unnecessary bookmarks from the list.
[1 ▲▼](UP/DOWN) Moves the selection position in the Bookmark list.
[2 ▲▼]VIEW Opens the web page of the selected bookmark.
[3 ▲▼]ADD Used when saving a bookmark (page 99).
[4 ▲▼]MOVEChanges the order of the bookmarks.
1Select...