Yamaha Wr250r 2008 Manual
Here you can view all the pages of manual Yamaha Wr250r 2008 Manual. The Yamaha manuals for Motorcycle are available online for free. You can easily download all the documents as PDF.
Page 61
CABLE ROUTING 2-36 1. Ignition coil lead 2. Fuel pump lead 3. Injector lead 4. Throttle position sensor lead 5. Rear brake switch lead 6. Right rear turn signal light lead 7. License plate light lead 8. Taillight lead 9. Left rear turn signal light lead 10. Lean angle sensor lead 11. Intake air pressure sensor lead 12. Clutch cable 13. Throttle cable A. Fasten the radiator fan motor lead and breather hose using a clamp. The rightmost end of breather hose must be secured (to the front as...
Page 63
CABLE ROUTING 2-38 1. Throttle cable (accelerator) 2. Throttle cable (decelerator) 3. Right handlebar switch lead 4. Clutch switch lead 5. Left handlebar switch lead 6. Clutch cable 7. Front brake switch lead 8. Left front turn signal light lead 9. Wire harness (brown connector) 10. Wire harness (green connector) 11. Left front turn signal light lead 12. Meter lead (3-pin black coupler) 13. Meter lead (4-pin natural color coupler) 14. Meter lead (3-pin natural color coupler) 15. Left...
Page 65
Front rear brake hose 2-40 1. Front brake hose 2. Hose guide 3. Union bolt 4. Copper washer 5. Front brake caliper assembly 6. Rear brake disc 7. Rear brake caliper assembly 8. Copper washer 9. Union bolt 10. Rear brake hose 11. Rear brake master cylinder 12. Rear brake switch 13. Brake pedal
Page 67
Throttle body 2-42 1. Breather hose 2. Air filter case assembly 3. Pipe 4. Throttle body assembly 5. Radiator inlet hose 6. Radiator 7. Throttle body joint 8. FID hose 9. Vacuum hose 10. Pressure sensor 11. Bend hose 12. ITS boost hose 13. Air induction system hose 14. Surge tank A. Face the white paint upward of the vehicle. B. Face the white paint mark to the right side of vehi- cle. C. Face the clip holder to the right front of vehicle. D. Face the clip holder upward of the vehicle. E....
Page 69
Canister (for California) 2-44 1. Fuel tank 2. Hose (Fuel tank – roll over valve) 3. Canister cover 4. Canister 5. A.C. magneto lead 6. Neutral switch lead 7. Recovery tank hose 8. Roll over valve 9. Holder 10. Hose 11. Clip A. Face the clip end forward of the vehicle. B. Face the clip end backward of the vehicle. C. Pass the hose (roll over valve – canister) between the engine head and air cut-off valve assembly. D. Route the hose (canister – throttle body) to the up side of the FID...