Yamaha Tyros 5 Owners Manual

Tyros5  Owner’s Manual21
Basic Operations
x TAB [][ ] buttons
These buttons are used mainly to change the pa ges of displays that have “tabs” at the top.
c [ASSIGN] slider
The [ASSIGN] slider is used to adjust the setting of a user-assigned 
function. By default, this slider is used to adjust the keyboard volume 
directly during your performance.
v [1]–[8] sliders
These sliders are used to adjust settin gs (up or down correspondingly) for func tions shown directly above them, only 
when the menu is...

22Tyros5  Owner’s Manual
n [DATA ENTRY] dial and [ENTER] button
Depending on the selected display, the [DATA ENTR Y] dial can be used in the following two ways.
Selecting files (Voice, Style, Song, and so on)
You can use the [DATA ENTRY] dial and  the [ENTER] button to select a file.
Adjusting the parameter values
In addition to using sliders, you can conveniently  use the [DATA ENTRY] dial in tandem with the [1 ]–[8] but-
tons to adjust parameters indicated in the display.
This convenient...

Tyros5  Owner’s Manual23
Basic Operations
With the convenient Direct Access functio n, you can instantly call up the desired display—with just a single additional 
button press.
1Press the [DIRECT ACCESS] button.
A message appears in the display prompting you to press the appropriate button.
2Press the button (or move the slider, wheel or connected pedal) 
corresponding to the desired setting display to instantly call up 
that display.
Refer to the “Direct Access Chart” on page 1 10 for a list of the...

24Tyros5  Owner’s Manual
The display that appears when the power is turned on is the  Main display. This display shows the current basic settings 
such as the currently se lected Voice and Style,  allowing you to see them at a single  glance. The Main display is the one 
you’ll usually see when you play the keyboard.
q Song name and related information
Displays the currently select ed Song name, time signature  and tempo. Pressing the [A] 
button calls up the Song Se lection display (page 71).
w MIC...

Tyros5  Owner’s Manual25
Basic Operations
!0Vocal Harmony Type
Displays the currently selected  Vocal Harmony Type (page 89).
!1 ASSIGN slider function
Displays the function (parameter) assigned to the ASSIGN slider and its value (page 21).
!2 Transpose
Displays the amount of transposition in semitone units (page 46).
!3 Upper Octave
Displays the amount that the octave value is shifted (page 46).
!4 Registration Sequence
Appears when the Registration Sequence is active. For instructions on programming...

26Tyros5  Owner’s Manual
eMENU 1/MENU 2
At the bottom of the File Selection display, you can toggle the indication between MENU 
1 and MENU 2 by pressing the [8 ] button. Selecting MENU 1 shows the function 
names related to the current file (Voice, St yle, Song, etc.) while selecting MENU 2 shows 
the function names of the file/folder manage ment (page 29). When MENU 1 is selected 
with the Voice selection display,  for example, pressing the [7] button will play back the 
Voice demo. When MENU 2 is se...

Tyros5  Owner’s Manual27
Basic Operations
Changing the File Selection Display View
The File Selection display actually has two different view ty pes. One is Normal View, which we’ve seen up until this 
point. The other is List View, which lets you open files acco rding to their numbers. Since the Tyros5 has many files 
spread out over several pages, number input in List View may be quicker and more convenient—providing you know the 
number of the file.
Switch between the two types by pressing the [7 ]...

28Tyros5  Owner’s Manual
Memorizing Song/Style paths
The File Selection display for Songs and Styles lets you memorize the path of specific Song/Style to one of the panel 
buttons. Even if your data is scattere d across the drive in a complex hierarchy of folders and paths, you can instantly 
call up a specific file—no matter how d eeply hidden—with a single button-press.
1In the List View display, select the Song/Style to  be memorized, then press the [E] (MEMORY) button.
2For Songs, press one of the...

Tyros5  Owner’s Manual29
Basic Operations
You can save, name, copy/move, delete files,  and you can create folders to manage the 
files with the buttons located lower area in the File Selection display. For information on 
the File Selection display, refer to page 25.
Saving a File
You can save your original data (such as Songs you’ve recorded) as a file to USER, HD or USB drive (page 25).
1In the relevant File Selection display, select the appropriate tab 
(USER, HD or USB) to which you want to save the...

30Tyros5  Owner’s Manual
4Enter the file name.
Even if you skip this step, you can rename  (page 31) the file at any time after sav-
ing.
5Press the [8 ] (OK) button to actually save the file.
The saved file will be automatically located at the appropriate position among the 
files in alphabetical order.
Creating a New Folder
You can create folders.
1In the file selection display, select the appropriate tab (USER, 
HD or USB) to which you want to create a new folder by using 
the TAB [ ][ ] buttons....