Yamaha Ro8d Manual

English
Deutsch
Français
Español
Português
Italiano
Русский

[
ÔŠ 
Owner’s Manual
Bedienungsanleitung
Mode d’emploi
Manual de instrucciones
Manual do Proprietário
Manuale di istruzioni
Руковод\bтво пол\fзователя
S*üAÈâ: S*üAÈâ:
	{
†Ì	{
JA
ZH
RU
IT
PT
ES
FR
DE
EN 

Owner’s Manual2
The above warning is located on the top of the unit.
L’avertissement ci-dessus est situé sur le dessus de l’unité.
Explanation of Graphical Symbols
Explication des symboles
The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the us er to the presence of unins ulated “danger-
ous voltage” within the product’s enclosure  that may be of sufficient magnitude to constitute a risk of electric shock to persons.
L’éclair avec une flèche à l’intérieur d’un...

 Owner’s Manual3
1.  IMPORTANT NOTICE: DO NOT MODIFY THIS UNIT!This product, when installed as indicated in the instructions con-
tained in this manual, meets FCC  requirements. Modifications not 
expressly approved by Yamaha may void your authority, granted by 
the FCC, to use the product.
2. IMPORTANT: When connecting this product to accessories and/
or another product use only high quality shielded cables. Cable/s 
supplied  with this product MUST be used. Follo w all installation 
instructions....

 Owner’s Manual4 

English
 Owner’s Manual5
Contents
PRECAUTIONS................................... 6
Introduction .................................... 8
Features ............................................................. 8
Firmware Updates .............................................. 8
Precautions for Rack Mounting .......................... 8
About Dante .................................... 9
Controls and Functions .................. 10
Front Panel ...................................................... 10
Rear Panel...

 Owner’s Manual6
PRECAUTIONS
PLEASE READ CAREFULLY BEFORE PROCEEDING 
* Please keep this manual in a safe place for future reference.
 WARNING
Always follow the basic precautions listed below to avoid 
the possibility of serious injury or even death from 
electrical shock, short-circuiting, damages, fire or other 
hazards. These precautions include, but are not limited 
to, the following:
• Do not place the power cord near heat sources such as heaters or radiators, and 
do not excessively bend or...

English
 Owner’s Manual7
NOTICE
To avoid the possibility of malfunction/ damage to the 
product, damage to data, or damage to other property, 
follow the notices below.
• Do not use the device in the vicinity of a TV, radio, stereo equipment, mobile 
phone, or other electric devices. Otherw ise, the device, TV, or radio may 
generate noise.
• Do not expose the device to excessive dust or vibrations, or extreme cold or heat  (such as in direct sunlight, near a heater , or in a car during the day) to...

Introduction Owner’s Manual
8
Introduction
Thank you for choosing the Yamaha Input Rack Ri8-D/
Output Rack Ro8-D. 
The Ri8-D is a Dante-compatible input rack equipped with 
8 channels analog input. The Ro8-D is a Dante-compatible 
output rack equipped with 8 channels analog output.
To take full advantage of the superior functions and 
performance offered by the Ri8-D/Ro8-D, and to extend 
the useful life of the product, be sure to read this owner’s 
manual carefully before operation.
Features...

English
About Dante
 Owner’s Manual
9
About Dante
This product features Dante technology as a protocol to 
transmit audio signals. Dante is a network protocol 
developed by Audinate. It is designed to deliver 
multi-channel audio signals at various sampling and bit 
rates, as well as device control signals over a Giga-bit 
Ethernet (GbE) network. Dante also offers the following 
benefits:
• It transmits up to 512 in/512 out, for a total 1024 
channels (in theory) of audio over a GbE network. 
(The Ri8-D...

Controls and Functions Owner’s Manual
10
Controls and Functions
Front Panel
1[INPUT] Connectors 1–8 (Ri8-D only)
These are the XLR-3-31 type analog balanced 
connectors for the input channels. The input level 
range is from –62 dBu to +10 dBu. +48V phantom 
power can be supplied to devices that require it via the 
input connectors.
NOTE
The PAD will be s witched on or off internally when the gain 
of the internal head amp is adjusted bet ween +17 dB and 
+1 8 dB. Keep in mind that noise may be generated...