Yamaha Rmio64d Manual

RMio64-D Owner’s Manual11
Connection
This section describes the following connections.
About Dante
Dante is a network audio protocol developed by 
Audinate. It is designed to deliver multi-channel audio 
signals at various sampling and bit rates, as well as 
device control signals over  a Giga-bit Ethernet (GbE) 
network.
Visit the Audinate website for more details on Dante:
http://www. audinate.com/
More information on Dante is also posted on the Yamaha 
Pro Audio website:...

RMio64-D Owner’s Manual12
Star Network
In a star network, each device is connected to a central 
GbE-compatible network switch. This connection 
enables you to configure a wide-band, large-scale 
network.
 Settings
• Turn on Dante DIP switch 1 (DOWN).
• If there are multiple Dante-compatible devices from 
Yamaha that require an ID setting connected to the 
same network, set a different ID for each device. Make 
sure to change the settings of the rotary switch while 
the power to the unit is turned off;...

RMio64-D Owner’s Manual13
Using Optical Cables
NOTE
Optical cables of up to 2,000 meters (theoretical value) can be 
used.
Redundant Connection (Input only)
You can set up a redundant connection using both 75Ω 
coaxial cables and optical cables, so that there is no 
input signal loss even if interference occurs in the 
connection.
In addition, the input signal from the Dante network is 
output from both the MADI [COAXIAL OUT] and MADI 
[OPTICAL OUT] connectors, regardless of the MADI 
redundancy...

RMio64-D Owner’s Manual14
Dante Network Settings and 
Audio Routing
With the Dante network, you can route the audio input 
and output of multiple Dante devices in any way you like. 
This requires you to set which channel signals are sent 
to which inputs. The routing for connecting MADI with 
the Dante network is fixed on  the RMio64-D. Therefore, 
any changes in routing are made in the Dante network. 
Use Dante Controller to configure the audio routing of 
the Dante network.
You can download Dante...

RMio64-D Owner’s Manual15
Wo rd  C l o ck
About Word Clock
• You can set the word clock source to an external clock device, the MADI input signal, or the Dante network.
• You can send the word clock from this unit to an  external device via the [WORD CLOCK OUT] 
connector.
• You can connect the [SYSTEM LINK OUT] connector  to the AES 2 IN connector on Steinberg Nuendo 
SyncStation for high-precision clock sync with 
Nuendo.
Selecting a Word Clock 
Source
Use the WORD CLOCK [WCLK  IN]/[MADI]/[DANTE] key...

RMio64-D Owner’s Manual16
Syncing the unit to a MADI input signal
NOTE
If the unit acts as the clock slave on the Dante network, input to 
the unit the same MADI clock used for the device that is the 
clock master. You can use Dante Controller (available from the 
following website) to check which device is the current clock 
master.
http://www.yamahaproaudio.com/ 
Using an external clock on MADI-compatible 
devices, and syncing the unit to a different 
external clock:
NOTE
• The same external clock...

RMio64-D Owner’s Manual17
Direct Monitoring
When RMio64-D is operating in the NUAGE Workgroup, 
a “direct monitoring” function is available. Direct 
monitoring allows you to monitor a MADI signal output 
from the RMio64-D to Steinberg Nuendo as direct MADI 
output, in the same way as NUAGE I/O.
Direct monitoring provides latency-free monitoring of 
signals from audio tracks balanced with the faders in 
Nuendo and MADI signals routed to the OUTPUT BUS.
To turn direct monitoring on or off, use the...

RMio64-D Owner’s Manual18
Routing / Patching
A mixer is not receiving an input signal 
from the RMio64-D
• Is the patch of the Dante net work set up correctly by 
Dante Controller?
• Is the patch setting in the mixer set to use the Dante  Controller?
• Is the word clock setting in the mixer set to correspond  to the Dante network?
How can the Dante input and output 
signals be patched?
Use Dante Controller to configure the audio routing 
(patching) of the Dante network . For details, refer to the 
Dante...

RMio64-D Owner’s Manual19
Index
Numerics
1Fs/2Fs/4Fs ............................................................. 8, 14
A
AC power cordUnlock ............................................................. 9, 13
AES/EBU output ........................................................... 10
Audio routing  ......................................................... 14, 18
C
Connecting AC power  ............................................................ 13
Coaxial cables...

Specifications
General Specifications
*The contents of this manual apply to the latest specifications as of the printing date. Since Yamaha makes continuous improvem ents to 
the product, this manual may not apply to the specifications of  your particular product. To obtain the latest manual, access th e Yamaha 
website then download the manual file. Since sp ecifications, equipment or separately sold accessories may not be the same in ev ery 
locale, please check with your Yamaha dealer.
Sampling...