Yamaha Rio3224d Manual

EN
Owner’s Manual
Keep This Manual For Future Reference. 

 Owner’s Manual2
Contents
PRECAUTIONS................................... 5
Introduction .................................... 7
Features ............................................................. 7
Firmware Updates .............................................. 7
Precautions for Rack Mounting .......................... 7
Recessed Installation .......................................... 8
About Dante .................................... 8
Controls and Functions .................... 9
Front Panel...

 Owner’s Manual3
The above warning is located on the top of the unit.
L’avertissement ci-dessus est situé sur le dessus de l’unité.
Explanation of Graphical Symbols
Explication des symboles
The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the us er to the presence of unins ulated “danger-
ous voltage” within the product’s enclosure  that may be of sufficient magnitude to constitute a risk of electric shock to persons.
L’éclair avec une flèche à l’intérieur...

 Owner’s Manual4
1.  IMPORTANT NOTICE: DO NOT MODIFY THIS UNIT!This product, when installed as indicated in the instructions con-
tained in this manual, meets FCC requirements. Modifications not 
expressly approved by Yamaha may void your authority, granted by 
the FCC, to use the product.
2. IMPORTANT: When connecting this product to accessories and/
or another product use only high quality shielded cables. Cable/s 
supplied with this product MUST be used. Follow all installation 
instructions. Failure...

 Owner’s Manual5
PRECAUTIONS
PLEASE READ CAREFULLY BEFORE PROCEEDING 
* Please keep this manual in a safe place for future reference.
 WARNING
Always follow the basic precautions listed below to avoid 
the possibility of serious injury or even death from 
electrical shock, short-circuiting, damages, fire or other 
hazards. These precautions include, but are not limited 
to, the following:
• Do not place the power cord near heat sources such as heaters or radiators, and 
do not excessively bend or...

 Owner’s Manual6
NOTICE
To avoid the possibility of malfunction/ damage to the 
product, damage to data, or damage to other property, 
follow the notices below.
• Do not use the device in the vicinity of a TV, radio, stereo equipment, mobile 
phone, or other electric devices. Otherw ise, the device, TV, or radio may 
generate noise.
• Do not expose the device to excessive dust or vibrations, or extreme cold or heat  (such as in direct sunlight, near a heater , or in a car during the day) to prevent 
the...

Introduction
 Owner’s Manual
7
Introduction
Thank you for choosing the Yamaha Rio3224-D/Rio1608-D 
I/O Rack. The Rio3224-D is a Dante-compatible I/O rack, 
featuring 32 analog inputs, 16 analog outputs, and 8 
AES/EBU outputs. The Rio1608-D is a Dante-compatible 
I/O rack, featuring16 analog inputs and 8 analog outputs. 
To take full advantage of the superior functions and 
performance offered by the Rio3224-D/Rio1608-D, and to 
extend the useful life of the product, be sure to read this 
owner’s manual...

About Dante Owner’s Manual
8
Recessed Installation
If you want to recess the front panel surface of the device 
from the front edge of the rack, you can adjust the position 
of  t h e r a c k m ou nt br a cket s  to  re c e ss  t he  d e v ic e by  5 0 m m  or 
100mm, as shown in the illustration below.
NOTE
When you install the brackets, use the same screws that 
you just removed.
About Dante
This product features Dante technology as a protocol to 
transmit audio signals. Dante is a network protocol...

Controls and Functions
 Owner’s Manual
9
Controls and Functions
Front Panel
1[INPUT] Connectors 1–32 {1–16}
These are the XLR-3-31 type analog balanced 
connectors for the input channels. The input level 
range is from –62 dBu to +10 dBu. +48V phantom 
power can be supplied to devices that require it via the 
input connectors.
NOTE
The PAD will be switched on or off internally when the gain 
of the internal head amp is adjusted between +17 dB and 
+18 dB. Keep in mind that noise may be generated if there...

Controls and Functions Owner’s Manual
10
6DIP Switches
These switches enable you to specify the settings 
related to the startup operation of the unit.
Set the DIP switches while the power to the unit is 
turned OFF. Otherwise, the setting will not be 
effective.
Refer to the following for details.
The switch illustrations indicate the setting state as 
follows.
• Switch 1 (UNIT ID) This switch setting determines whether the 
hexadecimal setting of the [UNIT ID] rotary switch 
will range from 0 to F or...