Yamaha Rev 5 Service Manual

							PRINTING THE SERVICE MANUAL
The PDF of this service manual is not designed to be printed from cover \
to cove r.  The pages vary in size, and must therefore be  printed in sections 
based on page dimensions. 
NON-SCHEM ATIC  PAGES
Data that does NOT  INCLUDE schematic diagrams are formatted to 8.5 x  11 inches and can be printed on standard letter-size and/ or A4-sized  pape r. 
SCHEM ATIC DIAGRAMS
The schematic diagram pages are provided in two ways, full size and tile\
d.   The full-sized schematic diagrams are formatted on  paper sizes between 
8.5” x  11”  and 18” x 30” depending upon each individual diagram size.   Those diagrams that are LARGER than  11” x 17” in full- size mode have been 
tiled for your convience and can be printed on standard  11” x 17” (tabloid-size) pape r, and reassembled. 
T O PRINT  FULL SIZE  SCHEM ATIC DIAGRAMS 
If you have access to a large paper plotter or printer capable of output\
ting the full-sized diagrams, output as follows:
1) Note the page size(s) of the schematics you want to output as indi\
cated in the middle window at the bottom of the viewing s creen.
2) Go to the File menu and select Print Set-up. Choose the printer name\
 and driver for your large format printe r.  Con  fi  rm that the printer settings 
are set to output the indicated page size or large r.
3) Close the Print Set Up screen and return to the File menu. Select “\
Print...”  Input the page number of the schematic(s) you  want to print in the 
print range windo w.  Choose OK.
T O PRINT  TILED VERSIO N OF SCHEMATICS 
Schematic pages that are larger than  11” x 17” full-size are provided in a  11” x 17” printable tiled format near the end of the  document.  These can be 
printed to tabloid-sized paper and assembled to full-size for easy viewi\
ng.
If you have access to a printer capable of outputting the tabloid size (\
 11” x 17”) pape r, then output the tiled version of the  diagram as follows:
1) Note the page number(s) of the schematics you want to output as in\
dicated in the middle window at the bottom of the viewing  screen.
2) Go to the File menu and select Print Set-up. Choose the printer name\
 and driver for your printe r.  Con  fi  rm that the plotter settings are set to output 
1 1” x 17”, or tabloid size paper in landscape (  
  ) mode.
3) Close the Print Set Up screen and return to the File menu. Select “\
Print...”  Input the page number of the schematic(s) you  want to print in the 
print range windo w.  Choose OK.
T O PRINT  SPECIFIC SECTIONS  OF A SCHEM ATIC
To print just a particular section of a PDF, rather than a full page, access the Graphics Select tool in the Acrobat Reader tool bar. 
1) To view the Graphics Select Tool, press and HOLD the mouse button over the Text Select Tool which looks like:                                                                                      
This tool will expand to reveal to additional tools.                                                                                                                                                                                                                                                Choose the Graphics Select tool by placing the cursor over the button on\
 of the far right that looks like: 
2) After selecting the Graphics Select Tool, place your cursor in the document window and the cursor will change\
 to a plus (+) symbol. Click and  drag the cursor over the area you want to print. When you release the mo\
use button, a marquee (or dotted lined box) will be displayed outlining 
the area you selected.
3) With the marquee in place, go to the  fi le menu and select the “Print...” option.  When the print window a\
ppears, choose the option under the section 
called “Print Range” which says “Selected Graphic”.  
Select OK and the output will print only the area that you outlined with\
 the marquee. 
               (continued >)
T