Yamaha Projector Dpx 1300 User Manual

							37
Menu
9
English
Menu Color
Trigger OutSets the TRIGGER OUT terminal.
Set the external control TRIGGER OUT jack 12 V signal emission to [Lamp] to
synchronize it to the ON/OFF state of the lamp, to [Fan] to synchronize it to the fan, and to
[RS-232C] to receive ON/OFF signals through the RS-232C terminal.
Choices: Lamp/Fan/RS-232C
Baud RateSets the transmission speed of the RS-232C terminal.
This setting becomes valid from the next time you switch the unit on.
Choices: 9600bps/19200bps/38400bps/57600bps/115200bps
MessageSelects whether to display memory number, input signal and other
information on the projection screen. (☞ page 62)
Choices: On/Off
Selects the color of the letters and background the main unit uses to display
the menu on screen.
You can choose to display the menu screen in [Monotone] or [Color]. Also, you can adjust
the contrast and brightness of the menu from the [Menu Brightness] and [Menu Contrast]
menus. You can select from 3 color types.
Monotone Menu Brightness
Menu ContrastColor Menu Brightness
Menu Contrast
Color Style
Menu items
Choices: Menu Brightness :-10 to 0 to +10
               Menu Contrast : 0.50 to 1.50
13_DPX-1300_E.p659/20/05, 4:01 PM 37 
						

							38
Menu operations
◆Operation button functions
Use the buttons on the remote control or the main unit to operate the menus. The button functions are listed below.
1Menu Button
Opens/Closes the menu.
2Cursor button
+ / - (Move the cursor ringht/left)
•Selects menu groups.
•Opens/Closes submenus.
•Selects/Changes settings.
h / g (Moves the cursor up/down)
•Selects menu items.
•Selects/Changes settings.
3 button
•Confirms setting changes.
•Opens the in-line menu when the menu is not open.
•Selects special operation (☞ page 42) and memory operation. (☞ page 48)
4ESCAPE button
•Returns the cursor one level up the menu (e.g. From the menu item level to the menu
group level).
•Closes submenus.
•Closes the menu screen when the cursor is in a menu group.
•Returns from the menu movement bar to the menu entry screen, after moving a menu.
5RESET button (Remote control only)
Returns parameters back to their default settings (Does not affect items with no default
setting).
45
RESET
6 123
VIDEO STILLHIDE
PATT IRIS AUTOSETTING
ZOOM FOCUS V.  POS
LIGHT
BDVI
S VIDEOAINPUT
MEMORYHDMI
INPUT
MENU
ASPECT
ESCAPE
STANDBY/ON
SETTING
LAMP COVER TEMP FAN PATTERN
ESCAPEMENU
INPUT ASPECT
3 1
2 4
5
1
3 4
2
D4
Remote Control
Main Unit
14_DPX-1300_E.p659/20/05, 4:01 PM 38 
						

							39
Menu
9
English
Menu operations
◆Menu operations 1 (with no submenu)
Menu operations use the procedure below to adjust menu item without submenus.
1. Press the MENU button to openthe menu screen.
Memo
•If you have opened the menu screen
previously, the menu displays the
settings from the last time you used it.
2. Press the + or - button to select a
menu group.
The illustration at right depicts the [Setup]
group being selected.
Menu items related to the selected menu group are displayed.
Y ou can now adjust the selected item.
Select a menu group (Image / Signal / Initial / Setup)
(Select with the +/- buttons)
Select an item to adjust or a setting
(Select with the  h /  g buttons)
Choose a setting for the selected item
(Usually, use the +/- buttons)
Remote Control Main Unit or
Image
Black Level
abcde
Memory 1VIDEO
0
White Level 0Gamma TrimHue 0Saturation 100
Color Adjustment
Level AdjustmentIris
SignalInitialSetup
White Peaking
Move Menu WindowWRGB
06500K  +
0.000uv-
2Sharpness Gain
Sharpness Type 2
Location
VIDEO
V Keystone Correction 0
OffOnLamp Power
82
OffOnMessageTrigger OutBaud Rate
Front / Table
Front & Rear
Monotone
Lamp115200bps
ID 1
Image
Memory 1
Signal Initial Setup
Move Menu Window
Menu Color Remote Control Sensor
Remote Control ID
Lens Adjustment Lock
H Keystone Correction 0
STANDBY/ON
SETTING
LAMP COVER TEMP FAN
PA
TTERN
ESCAPE MENU
INPUT
ASPECTPATT
IRIS
AUTOSETTINGZOOM FOCUS
V.   POS
INPUT
MENU
ASPECT
ESCAPE
Remote Control Main Unit
MENU Button
14_DPX-1300_E.p65 9/23/05, 12:03 PM
39 
						

							40
6. To close the menu screen when
you have finished making
adjustments, press the MENU
button. 5. Move to another item or group as
necessary.
Memo
•Press the h or g button to move the
cursor to another item in the same
group.
To move to an item in another menu
group, press the ESCAPE or h button
to return to the top of the menu group,
and repeat steps 2,3 and 4. Remote Control Main Unitor
Menu operations
4. Press the + or - button to select a
suitable setting.
The illustration at right depicts the  [Lens
Adjustment Lock] mode set to [On].
Memo
•The setting method depends on the
item selected.
3. Press the h or g button to move
the cursor to the item you wish to
adjust.
The illustration at right depicts [Lens
Adjustment Lock] being selected.
Remote ControlMain Unit or
Remote Control Main Unitor
Location
VIDEO
V Keystone Correction 0
OffOnLamp Power
82
OffOnMessageTrigger OutBaud Rate
Front / Table
Front & Rear
Monotone
Lamp115200bps
ID 1
Image
Memory 1 Signal Initial SetupMove Menu Window
Menu Color Remote Control Sensor
Remote Control ID
Lens Adjustment Lock
H Keystone Correction 0
Location
VIDEO
V Keystone Correction 0
OffOnLamp Power
82
OffOnMessageTrigger OutBaud Rate
Front / Table
Front & Rear
Monotone
Lamp115200bps
ID 1
Image
Memory 1 Signal Initial SetupMove Menu Window
Menu Color Remote Control Sensor
Remote Control ID
Lens Adjustment Lock
H Keystone Correction 0
Remote Control Main Unit
STANDBY/ON
SETTING
LAMP COVER TEMP FAN PATTERN
ESCAPE MENU
INPUT ASPECTPATT IRIS AUTOSETTINGZOOM FOCUS V.  POS
INPUT
MENU
ASPECT
ESCAPE
Remote Control Main Unit ESCAPE Button
STANDBY/ON
SETTING
LAMP COVER TEMP FAN PATTERN
ESCAPE MENU
INPUT ASPECTPATT IRIS AUTOSETTINGZOOM FOCUS V.  POS
INPUT
MENU
ASPECT
ESCAPE
MENU Button
14_DPX-1300_E.p659/20/05, 4:01 PM 40 
						

							41
Menu
9
English
Menu operations
◆Menu operations 2 (with submenus)
Use the procedure below to adjust menu items that contain submenus.
1. Carry out steps 1 to 3 from “MenuOperations 1” to select the menu
item you want to set.
The illustration at right depicts [Display
Language] in the [Initial] group selected.
Memo
•“” appears to the right of items that
contain a submenu.
Remote Control Main Unit or
Color System
VIDEO
INPUT A SignalINPUT A Sync TypeINPUT B SignalINPUT B Sync Type
Auto Power OffAuto Input SearchDisplay Language
Reset
AutoComponentAutoRGB TVAutoHDMI SignalComponentDVI SignalComponent
EnglishLamp Running Time0 Hour
On
OffOffOn
Image
Memory 1
Signal Initial Setup
Move Menu Window
ItalianoPortuguêsa
FrançaisEspañolDeutschEnglish
VIDEO
Display Language
Image
Memory 1
Signal Initial Setup
Move Menu Window
VIDEO
ItalianoPortuguêsa
FrançaisEspañolDeutschEnglish
2. Press the + button to move to the
submenu.
Memo
•Some menu items contain other items
that you can select. In such cases,
move to the lower level submenu
using the + button.
3. Press the  h or  g button to adjust
item settings.
Memo
• When “  : Fix” appears in the
operations guide at the bottom left of
the menu screen, press the 
 button
to confirm the selected settings.
4. Press the – or ESCAPE button to return to higher level menu items.
5. To close the menu screen when you have finished making
adjustments, press the MENU
button.
Items using the 
 button for setting.
Display Aspect  Ratio
Color System
Input A  Signal
Input A  Sync Type
Input B Signal
Input B Sync Type
HDMI Signal
DVI Signal
Remote Control Sensor
Remote Control ID
14_DPX-1300_E.p65 9/21/05, 3:32 PM
41 
						

							42 
◆Special operations
Some items in the menu require special methods to configure.
VIDEOMemory 1 Initial Setup
nu Window
Gain 0.82
y
0.3 0.35
0.6 0.65x
x=0.640     y=0.330
Image SignalMove Me
n
: Edit
y
0.5
0.0
0.0 0.5 x
Red
Example: Adjusting R (Red)
The name of the
selected item appears
here.
Use the h, g, +, or -
button to select an
item.Press the 
 button.
Press the ESCAPE
button.Color coordinate
display area
Color coordinate
adjustment area
Press the  button to
change the item to adjust.
Gain setting
display areaGain adjustment
area
Menu operations
1. Select [Color Adjustment] in the [Image] group from the main menu.
2. Press the + button to enter submenus.
3. Select a suitable item from [Standard] • [WRGB] • [WRGBYCM] using the h or g button, and
press the + button.
This explanation uses the [WRGBYCM] menu as an example.
4. Press the h, g, +, or - button to select the item you wish to configure from the color scale, and
press the 
 button.
The Color coodinate adjustment area on the right side of the menu screen will be highlighted.
5. Press the h, g, +, or - button to adjust the setting for the item.
6. If you select  R (red), G (green), B (blue), Y (yellow), C (cyan), or M (magenta) in step 4, press the
 button to move to the gain adjustment area, and press the + or - button to adjust the gain.
7. Press the ESCAPE button to return to the color scale.
Memo
 • See page 32 for datails about each color item.
14_DPX-1300_E.p659/20/05, 4:01 PM 42 
						

							43
Menu
9
English
Menu operations
1. Select [Color Adjustment] in the [Image] group from the main menu.
2. Press the + button to enter submenus.
3. Select  [WRGB] from the [Standard], [WRGB], [WRGBYCM] using the h or  g button, and press
the + button.
4. Press the  h, g , +, or - button to select W (Color temperature and  h UV)  from the color scale,
and press the 
 button.
The color temperature adjustment area on the right side of the menu scre\
en will be highlighted in white.
5. Press the  h, g , +, or - button to adjust the color temerature.
6. Press the 
 button to enter the color temperature fixed mode.
The “     ” icon appears on the W (Color temperature and  h UV ) box.
• In this mode, you cannot use the  h, g , +, or - button to change the color temperature. If you try to change,
“The color temperature is fixed.” appears at the bottom of the men\
u screen.
 
7. Press the ESCAPE button to return to the color scale. Follow steps 4 to \
5 in the “Example: Adjusting R (Red)” on page 42 to adjust the color coordinates.
•When using the color temperature fixed mode, the gain adjustment area wi\
ll not be displayed.
•T o cancel the color temperature fixed mode, select the W (Color temperat\
ure and  h UV) box and press the
 button until the “  ” icon disappeares.
The name of the
selected item appears
here.
When this unit is in
the color temperature
fixed mode, the “ 
 ”
icon appears on this
W (Color temperature
and  h UV) box. Press the 
 button.
When this unit is in the
normal mode, the “ 
 ”
icon dissapears.
Use this mode when you want to adjust the RGB coordinate while keeping the color temperature setting unchanged. Example: Using the color temperature fixed mode
Image Signal
Move Men
ESCAPE : Return
y
0.5
0.0 0.0 0.5 x
Color Temp.
Image Signal Move Men
ESCAPE : Return
y
0.5
0.0 0.0 0.5 x
Color Temp.
Memo
Memo
Press the  button.
Example:
Color temperature fixed mode
Example:
Normal mode
14_DPX-1300_E.p65
9/21/05, 3:32 PM
43 
						

							44 
Reset the selected settings to the default settings.
VIDEOESC : Return
Image
Memory 1 Signal Initial SetupMove Menu Window
VIDEO
Image
Memory 4 Signal Initial SetupMove Menu Window
Press        to reset 
to factory settings.
ESC : Return
1. Select the item you wish to reset to the default setting
from the main menu.
2. Press the RESET button on the remote control to reset
to the default setting (resetting does not affect items
with no default setting).
Memo
•The RESET button has a special function when selecting
[WRGBYCM] in [Color Adjustment]. (☞ page 32)
•The RESET button resets the parameters to their default
settings (corresponding to the signal input: HDTV or SDTV)
when the Color coordinate adjustment area is selected after
selecting  [WRGB] or [WRGBYCM] in [Color Adjustment]. (☞
page 32)
1. From the menu screen, select [Initial]  [Reset]
 [All Settings].

Reset all of your settings to its factory presets.
VIDEO+ : Enter
ResetAll Settings
All Memory
Current Memory Image
Memory 4 Signal Initial SetupMove Menu Window
2. Press the + button to display a confirmation message.
3. Press the 
 button to reset to the default settings.
Memo
•To cancel this operation and return to the previous screen,
press the ESCAPE button.

Change the position of the menu on the screen.
1. In the menu screen, press the ESCAPE or h button
and move the cursor to one of the menu groups.
2. Press the h button to enter [Move Menu Window].
3. Use the h, g, +, or - button to move the menu screen
to a location of your choice.
4. Press the ESCAPE button to return to the previous
menu screen.
Menu operations
14_DPX-1300_E.p659/20/05, 4:01 PM 44 
						

							45
Menu
9
English

Reset the [Lamp Running Time] displayed on screen to “0”.
VIDEO
Special Image Signal Initial SetupMove Menu Window
Memory 1 Cinema Zoom
Cinema Squeeze
14:9 ZoomSubtitle Zoom
+ : Enter

Use the [Subtitle Area] menu to adjust the size of the subtitle display area. Use [V Scroll] to adjust the vertical position of the subtitle display.
1.  From the menu screen, select [Signal] 
 [Display
Aspect Ratio] 
 [Special].
2.  Press the + button to enter the lower level selection
menu.
3.  Select [Subtitle Zoom] with h or g buttons.
4.  Press the 
 button.
“
” appears to the right of [Subtitle zoom].
Memo
•After the first time you carry out this procedure, “” appears
beside [Subtitle Zoom] automatically.
1. From the menu screen, select [Initial]  [Lamp
Running Time].
: Fix
NoYe s
VIDEO
Image
Memory 4 Signal Initial SetupMove Menu Window
Lamp Running Time 12 HoursPress          to reset lamp running time.
Color System
VIDEO
INPUT A SignalINPUT A Sync TypeINPUT B SignalINPUT B Sync Type
Auto Power Off
+ : Enter
Auto Input SearchDisplay Language
Reset
AutoComponentAutoRGB TVAuto
DVIComponentHDMI SignalComponent
EnglishLamp Running Time12 Hours
On OffOffOn Image
Memory 1 Signal Initial SetupMove Menu Window
2. Press the + button to open the confirmation screen.
3. Press the h or g button to select [Yes].
4. Press the 
 button to confirm.
Memo
•To cancel the operation and return to the menu screen, select
[No].
Menu operations
14_DPX-1300_E.p659/20/05, 4:01 PM 45 
						

							46
5. Press the + button to enter the lower level selection
menu.
6. Press h or g button to select [Subtitle Area] or [V
Scroll].
7. Press the + or – button to select a suitable setting.
Memo
•Press the h or g button to move to a different menu item in
the [Subtitle Zoom] menu.
8. Press the ESCAPE button to return to the higher level
selection menu.
VIDEO
Image Signal Initial SetupMove Menu Window
Memory 1
ESC : Return
Subtitle AreaV Scroll0
0
Subtitle Zoom
Press the  button
1. From the menu screen, select [Image]  [Gamma].
2. Press the 
 button to switch between capital (A to E)
and non capital (a to e) letters.
3. Use the + or – button to select an appropriate setting.

Select a gamma control pattern (color tone characteristics) from the 10 preset patterns. (☞ page 30)
Image
Black Level
ABCDE
Memory 1VIDEO 0
White Level 0GammaHue 0Saturation 100
Color Adjustment
Level AdjustmentIris
SignalInitialSetup
White PeakingMove Menu WindowWRGB
06500K +
0.000uv-
a
: ExchangeA
2Sharpness Gain
Sharpness Type2
Image
Black Level
abcde
Memory 1VIDEO 0
White Level 0GammaHue 0Saturation 100
Color Adjustment
Level AdjustmentIris
SignalInitialSetup
White PeakingMove Menu WindowWRGB
06500K +
0.000uv-
Aa
: Exchange
2Sharpness Gain
Sharpness Type2
Menu operations
14_DPX-1300_E.p659/20/05, 4:01 PM 46