Yamaha Motif 6 Manual

Appendix
Troubleshooting
281Owner’s Manual
■ The drum sound is wrong or unexpected when changing the transpose value. 
•This is normal. Changing the transpose setting while playing a Drum Voice will produce different sounds for the same keys played. 
Microphone does not work properly
•Check the current mode. In the Voice mode and Voice Edit mode, the A/D par t which handles the microphone sound cannot be recognized. ......... page 165
•Check whether the Mic/Line parameter is set to “mic” or not in the...

Installing Optional Hardware
282Owner’s Manual
Appendix
Installing Optional Hardware
Available devices 
The following optional devices can be installed to the MOTIF ES.
Installation locations
Installation Precautions
Before installing the optional hardware, make sure you have a Philips screwdriver and ample space to work. Protective cushions 
or supports for the instrument may also be needed.
•Before beginning installation, switch off the power to the instrument and connected peripherals, and unplug them...

Installing Optional Hardware
283Owner’s Manual
Appendix
Optional Plug-in Board Installation
A variety of optional Plug-in boards sold separately let you expand the voice library of your instrument. For details about the 
Plug-in Board line up which can be used with the MOTIF ES, see page 74. 
The MOTIF ES provides three slots on the rear panel for Plug-in Boards, allowing you to install up to three boards for 
simultaneous use.
nThe Vocal Harmony Plug-in board (PLG100-VH) can be installed only to slot...

Appendix
Installing Optional Hardware
284Owner’s Manual
5With the board still protruding slightly from the 
expansion bay, bring the cable end around and connect 
it to the board. 
Make sure to connect the proper cable, matching the color 
of the cable to the slot used. Also, take care not to pull too 
strongly on the cable as you connect it to the board.
nThe Vocal Harmony Plug-in board (PLG100-VH) can be installed only 
to slot 1.
n
The Multi part Plug-in board (PLG-100XG) can be installed only to slot...

Installing Optional Hardware
285Owner’s Manual
Appendix
Optional AIEB2 or mLAN16E Installation
By installing an optional mLAN expansion board (mLAN16E) or an I/O expansion board (AIEB2), you can increase the input/output 
capability and interfacing options of the MOTIF ES. 
Installing the AIEB2
1Turn the power of the MOTIF ES off, and disconnect the 
AC power cord. Also, make sure to disconnect the 
MOTIF ES from any connected external devices. 
2Turn over the MOTIF ES so that the keyboard faces 
down,...

Appendix
Installing Optional Hardware
286Owner’s Manual
4Remove the three screws from the rear cover while 
holding it from inside the MOTIF ES with your left hand.
Keep the removed screws in a safe place. They will be used when
re-attaching the cover to the instrument after installing the AIEB2.
5Remove the AIEB2 power cables from the hook shaped 
cable clip in the MOTIF ES.
6Remove the AIEB2 from its package. 
The AIEB2 has one flat ribbon cable and two power cables. 
Since these two power cables are...

Installing Optional Hardware
287Owner’s Manual
Appendix
8Connect the power cable coming from MOTIF ES to the 
AIEB2.
Connect the 3-pin cable to the CN3 connector of the 
AIEB2, and the 4-pin cable to the CN1 connector.
9Fasten the AIEB2 to the MOTIF ES.
Flip the unit over, so that the bottom of the plate can be 
seen, and that each connector section of the AIEB2 can be 
seen from the back (rear) side of MOTIF ES. Supporting the 
unit with one hand, attach it to the rear of the MOTIF ES with 
the three...

Appendix
Installing Optional Hardware
288Owner’s Manual
Installing the mLAN16E
1~4
Using the same procedure as in steps 1 - 4 of “Installing 
the AIEB2” above, remove the cover on the underside 
of the MOTIF ES, then remove the cover of the mLAN-I/
O expansion bay on the rear panel.
5Remove the mLAN16E from its package.
6Insert the connector on the other end of the flat ribbon 
cable to the circuit board of the MOTIF ES.
7Fasten the mLAN16E to the MOTIF ES. 
Flip the unit over, so that each connector...

Installing Optional Hardware
289Owner’s Manual
Appendix
Optional DIMM Installation
This section explains how to install DIMM memory modules to the MOTIF ES. 
Compatible DIMMs
The MOTIF ES does not necessarily support all commercially 
available DIMMs. Yamaha cannot guarantee operation of 
DIMMs that you purchase. Before purchasing DIMMs, please 
consult your Yamaha dealer, or an authorized Yamaha 
distributor (see list at end of the Owner’s Manual) for advice, 
or see the following page:...

Appendix
Glossary
290Owner’s Manual
Glossary
This section explains in detail various words and terms that were not covered in the manual.  Another resource for looking up 
unfamiliar technical terms related to music, synthesis and audio is a special website we’ve prepared, the Glossary for Electronic 
Musical Instruments.  If you come across a musical or technical term you don’t know, click on the following URL.
■ Glossary for Electronic Musical Instruments...