Yamaha Dvx S302 Owners Manual

							GETTING STARTED
26 ■Setting language preferences
You can select your preferred language settings so that this 
receiver will automatically switch to your preferred 
language whenever you load a disc. If the language 
selected is not available on the disc, the disc’s default 
setting language will be used instead. The OSD (on-screen 
display) language for the system menu will remain as you 
set it, regardless of various disc languages.
On-screen display (OSD) language
1In DVD/CD mode, press SET UP.
2Press   to select [GENERAL SETUP PAGE].
3Press   /   to highlight [OSD LANGUAGE], 
then press  .
 
4Press   /   to select a language and press 
ENTER (OK) to confirm.
5To return to the previous menu, press  .
To exit the menu, press SET UP.
Audio, Subtitle and Disc menu 
languages
1Press s twice to stop playback (if any), then press 
SET UP.
2Press   repeatedly to select [PREFERENCE PAGE].
3Press  /  to highlight one of the options below 
at a time, then press  . 
–[AUDIO] (disc’s soundtrack)
–[SUBTITLE] (disc’s subtitles)
–[DISC MENU] (disc’s menu)
4Press   /   to select a language and press 
ENTER (OK) to confirm.
If the language you want is not in the list, then select 
[OTHERS].
Use the numeric keypad (0-9) on the remote control 
to enter the 4-digit language code (see “LIST OF 
LANGUAGE CODES” at the end of this manual”) 
and press ENTER (OK) to confirm.
5Repeat steps 3 and 4 for other settings.
6To return to the previous menu, press  .
To exit the menu, press SET UP.
DVD AUDIO
DISC LOCK
PROGRAM
OSD LANGUAGE
SCREEN SAVER
DiVX(R) VOD  CODEENGLISH
FRANÇAIS
ESPAÑOL
GENERAL SETUP PAGE
AUDIO
SUBTITLE
DISC MENU
PARENTAL
PBC
MP3/JPEG NAV
VR LIST
PASSWORDENGLISH
CHINESE
FRENCH
SPANISH
PORTUGUESE
POLISH
ITALIAN
TURKISH
PREFERENCE PAGE 
						

							GETTING STARTED
27
BASIC OPERATION
3
English
■Setting speaker channels
You can adjust the delay times (for center and surround 
speakers only) and volume level for individual speakers. 
These adjustments let you optimize the sound of your system 
to best suit your surroundings and setup.
Press 
SURR on the remote control to select the multi-
channel surround mode before adjusting the speaker settings.
1Press s to stop playback, then press SET UP.
2Press   repeatedly to select [AUDIO SETUP PAGE]. 
3Press   /   to highlight [SPEAKER SETUP], 
then press  .4Press   /   to highlight one of the options below, 
then press  . 
[SPEAKER VOLUME] – Volume level setting for 
individual speakers (–6dB to +6dB).
[SPEAKERS DELAY] – Delay time settings is in 
relation to the listening position/distance for center 
and surround speakers (0 MS to 15 MS).
5Press   /   to adjust the setting that best suit your 
surround sound needs.
6Press ENTER (OK) to confirm.
7To return to the previous menu, press  .
To exit the menu, press SET UP.
– Use a longer delay time settings when the surround 
speakers are closer to the listener than the front 
speakers.
– A test tone will be automatically generated to help 
you judge the sound level of each speaker.
Note
SPEAKER SETUP
CD UPSAMPLING
NIGHT MODE
LIP SYNC
SPEAKERS VOLUME
SPEAKERS DELAY
AUDIO SETUP PAGE
SPEAKER SETUP PAGE
Notes
0dB
0dB
0dB
0dB
0dB
0dB FRONT LEFT
FRONT RIGHT
CENTER
SUBWOOFER
SURROUND L
SURROUND R
SPEAKER VOLUME SETUP
0 MS
0 MS
0 MS CENTER
SURROUND L
SURROUND R
SPEAKER DELAY SETUP 
						

							DISC OPERATION
28
IMPORTANT! 
–If the inhibit icon (  or “X”) appears on the TV 
screen when a button is pressed, the function for 
that button is not available on the current disc or at 
the current time.
–DVD discs and players are designed with regional 
restrictions. Before playing a disc, make sure the 
disc is for the same zone as your receiver. 
–Do not push on the disc tray or put any objects other 
than discs on the disc tray. Doing so may cause the 
disc player to malfunction.
■Playing discs
1Press DVD/CD until “DVD/CD” appears in the display 
panel.
2Turn on the TV power and set to the correct Video In 
channel (see “Setting a TV” on page 24).
→ You should see the background screen on the TV. 
3Press   once to open the disc tray and load a disc, 
then press the same button again to close the disc tray.
4Playback will start automatically.
→ If a disc menu shows on the TV, see “Using the 
disc menu” on page 30.
→ If the disc is locked by parental control, you must 
enter your six-digit password (see “Restricting 
playback with parental control” on page 41).
Auto eco power standby mode
This is a power-saving feature. The receiver will 
automatically switch to Eco Power standby mode if you 
do not press any buttons for 30 minutes after a disc has 
stopped playing.
■Basic playback controls
To pause playback
During playback, press e.
–
 To resume normal playback, press h.
To select another track/chapter
Press b / a or use the numeric keypad (0-9) to 
enter a track/chapter number.
–
 During repeat playback of a track/chapter, pressing 
b / a replays the same track/chapter.
To search backward/forward
Press and hold b / a. To resume normal chapter.
Searching backward/forward playback, press h.
–
 While searching, press b / a again to increase the 
search speed.
To stop playback
Press s.
DISC OPERATION
VOLUMEI
N
PU
T
ST
AND
B
Y
/ON
TV VOL TV  CHEFFECT SURRVOLTRE  MENU
SET UP
PRESETSUBTITLE AUDIO ANGLEZOOM
TV AUX TUNER DVD/CD
TV
INPUTMUTE BASS
ENTER TOP MENU/RETURN
ON SCREENPROGREPEAT A - B-SHUFFLESCANPAG E
DIMMER
POWERPOWER
SLEEP 
NIGHT
TV
Numeric 
keypad (0-9)
dPRESETu 
(b / a)
sh
e 
						

							DISC OPERATION
29
OPERATIONS
4
English
■Selecting various repeat shuffle 
functions
Repeat play mode
Repeat chapter/title/disc (DVD-V)
Each time you press REPEAT, the display changes as 
follows:
 CHAPTER*: repeats the current chapter.
 TITLE: repeats the current title.
 DISC*: repeats the entire disc.
REPEAT OFF: exits repeat mode.
* This feature may not be available with some discs.
Repeat track/disc 
(except DVD-V/DVD-A)
Each time you press REPEAT, the display changes as 
follows:
 TRACK: repeats the current track.
 DISC: repeats the entire disc.
REPEAT OFF: exits repeat mode.
Repeat track/group/disc (DVD-A)
Each time you press REPEAT, the display changes as 
follows:
 TRACK: repeats the current track.
 GROUP: repeats the current group.
 DISC: repeats the entire disc.
REPEAT OFF: exits repeat mode.
For VCD, repeat playback is not possible if the PBC 
mode is selected.
Repeating a section within a chapter/
track
1While playing a disc, press A-B at your chosen 
starting point.
2Press A-B again at your chosen end point.
→ The section will now repeat continuously.
3To exit the sequence, press A-B.
■Shuffle (except VR format disc) 
With the Shuffle function, you can play tracks in random 
order. 
–During playback, press SHUFFLE repeatedly to 
select between SHUFFLE, SHUFFLE REPEAT and 
SHUFFLE OFF.
→ The selected mode appears in the display for 
several seconds.
–In SHUFFLE mode, all tracks on the disc currently 
playing are played in random order. 
–In SHUFFLE REPEAT mode, all tracks are played 
in random order and continuously.
–For Hybrid Super Audio CDs, tracks on the Super 
Audio CD layer are played by default (see “Playing 
Super Audio CDs” on page 34).
Note
CHAPTER TITLE
DISCREPEAT OFF
 TRACK DISC
REPEAT OFF
TRACK GROUP
DISC
REPEAT OFF 
						

							DISC OPERATION
30
 ■Other operations for video 
playback 
(DVD/VCD/SVCD)
Using the disc menu
Depending on the disc, a menu may appear on the TV 
screen once you load the disc.
To select a playback feature or item
Use  /   /   /  or the numeric keypad 
(0-9) on the remote control, then press ENTER (OK) to 
start playback.
To access or remove the menu
Press MENU on the remote control.
Displaying disc information and the 
current status
You can display disc information and the disc’s current 
status (for example, title or chapter number, elapsed 
playing time, audio/subtitle language). A number of 
operations can be performed without interrupting disc 
playback.1During playback, press ON SCREEN.
→ A list of available disc information appears on the 
TV screen.
2Press  /  to view the information and press 
ENTER (OK) to access.
3Use the numeric keypad (0-9) to enter the number/
time or press  /   to make the selection, then 
press ENTER (OK) to confirm.
→ Playback will change to the chosen time or to the 
selected title/chapter/track.
Zooming in
This function allows you to enlarge the picture on the TV 
screen and pan through the enlarged picture.
1During playback, press ZOOM repeatedly to select a 
different zoom factor.
Use  /   /   /  to move through the zoomed 
image.
→ Playback continues.
2Press ZOOM repeatedly to return to the original size.
Resuming playback from the last 
stopped point
You can resume playback of the last 10 discs, even if the 
disc was ejected or this receiver’s power switched off.
1Load one of the last played 10 discs.
→ “LOAD” appears.
2Press h and the disc will be played back from the last 
stop point.
To cancel the resume mode
In stop mode, press s again.
TV VOL TV  CHEFFECT SURRVOLTRE  MENU
SET UP
PRESETSUBTITLE AUDIOANGLEZOOM
TV AUX TUNER DVD/CD
TV
INPUTMUTE BASS
ENTER TOP MENU/RETURN
ON SCREENPROGREPEAT A - B-SHUFFLESCANPAG E
DIMMER
POWERPOWER
SLEEP 
NIGHT
TV
ON SCREEN
ZOOM
ANGLE TOP MENU/
RETURN
MENU
SUBTITLE
AUDIO
TITLE
CHAPTER
AUDIO
SUBTITLE02/02
02/14
5.1CH
OFF MENU
BITRATE 16 TITLE ELASPED 0:02:25
TRACK
TT TIME
CH TIME
REPEAT02/14
0:49:17
0:03:43
OFF MENU
BITRATE 16 TITLE ELASPED 0:02:25 
						

							DISC OPERATION
31
OPERATIONS
4
English
Advancing by frame
1During playback, press e on the remote control.
→ Play will pause and sound will be mute.
2Press e again to select the next picture frame.
3To resume normal playback, press h.
Changing sound track language This operation works only on DVDs with multiple 
soundtrack language, you can change the language you 
want while playing a DVD.
Press AUDIO repeatedly to select the available audio 
languages.
For VCD - changing the audio channel
Press AUDIO repeatedly to select the available audio 
channels provided by the disc (STEREO, LEFT MONO, 
RIGHT MONO or MIX MONO).
Changing subtitle language (DVD only)
This operation works only on DVDs with multiple subtitle 
languages, you can change the language you want while 
playing a DVD.
Press SUBTITLE repeatedly to select from the various 
subtitle languages.
Viewing from another angle (DVD only)
If the disc contains sequences recorded from different 
camera angles, this function allows you to view the picture 
from a number of different angles.
Press ANGLE repeatedly to select the desired angle.
→ Playback changes to the selected angle.
Selecting a title (DVD only)
Some DVDs may contain several titles. If the disc has 
been recorded with a title menu recorded on it, you can 
start playback from the selected movie title.
1Press TOP MENU/RETURN.
→ The disc title menu appears on the TV screen.
2Use  /   /   /  or the numeric keypad 
(0-9) to select a play option.
3Press ENTER (OK) to confirm.
Playback control (PBC) (VCD only)
PBC playback allows you to play Video CDs interactively, 
following the menu on the display.
This function can also be accessed via the 
‘PREFERENCE PAGE’ menu (see “PBC” on page 42).
For VCDs with Playback Control (PBC) 
feature (version 2.0 only)
With playback stopped, press MENU to toggle between 
‘PBC ON’ and ‘PBC OFF’.
→ If you select ‘PBC ON’, the disc menu (if available) 
will appear on the TV. Use b / a or the numeric 
keypad (0-9) to select a play option and press ENTER 
(OK) to confirm.
→ If you select ‘PBC OFF’, the VCD will skip the index 
menu and playback directly from the beginning. 
						

							DISC OPERATION
32
Preview function
Preview function includes the following 2 types.
Digest: 
This function displays a thumbnail to help you to preview 
the following sections of the disc. 
TITLE, CHAPTER, GROUP, TRACK
Interval: 
This function divides the following options at regular 
intervals to help you preview the scene you want to see.
TITLE, CHAPTER, GROUP, TRACK, DISC
The menu appears on the TV screen differs depending on the 
Disc or current status (playback or stop).
Preview title/chapter
(DVD for example)
1Press SCAN.
→ The menu appears on the TV screen.
2Press  /  to highlight [
TITLE DIGEST], 
[
CHAPTER DIGEST], [TITLE INTERVAL] or [CHAPTER 
INTERVAL
] and press ENTER (OK) to open one 
option.
3Use b / a to open the previous or next page.
4Use  /   /   /  to select a title/chapter or use 
the numeric keypad (0-9) to input the selected title/ 
chapter number next to [SELECT]. 
5Press ENTER (OK) to start playback from the scene 
you select.
To quit the preview function
Use  /   /   /  to highlight [EXIT] and press 
ENTER (OK) to confirm.
To return to the preview menu
In step 3 and 4, use  /   /   /  to highlight 
[MENU] and press ENTER (OK) to confirm.
Note
(Example of 6 thumbnails in the display)
SELECT DIGEST TYPE:
TITLE DIGEST
CHAPTER DIGEST
TITLE INTERVAL
CHAPTER INTERVAL 
						

							DISC OPERATION
33
OPERATIONS
4
English
■Playing MP3/JPEG/DivX® discs
This receiver can play DivX®, MP3, JPEG, VCD and 
SVCD files on a personally recorded CD-R/RW disc or 
commercial CD.
You have to turn on your TV and set to the correct Video In 
channel (see “Setting a TV” on page 24).
1Load the disc.
→ The disc reading time may exceed 30 seconds due 
to the complexity of the directory/file configuration. 
→ The disc menu appears on the TV screen.
2Press  /  to select a desired folder and press 
ENTER (OK) to open the folder.
3Press  /  to select a track/file.
4Press ENTER (OK) to confirm.
→ Playback will start from the selected file to the end 
of the folder.
While the disc menu is displayed, you can:
–Press b / a to select another track/file in the 
current folder.
– To select another folder from the current disc, press   
to return to the root menu, then press  /  to 
make your selection and press ENTER (OK) to 
confirm.
–Press e to pause or h to resume playback. 
If you press  /   /   /  during playback of 
JPEG images, the picture rotates.
MP3 disc features
The MP3-CD formats (ISO9660 format) 
support the following:
– MP3 files must have the extension “.MP3” or “.mp3”
– Max. 30 characters
– Max. nested directory is 8 levels.
– Max. album number is 99.
– Max. track number is 999.
– Supported sampling rates of 32, 44.1, 48/16, 22.05, and 
24 kHz
The following features are not supported 
for MP3 discs:
– The discs that have any types of file other than MP3 
and JPEG.
– The simultaneous playback of the MP3 and JPEG files.
– Chinese filenames and text.
– Non-finalized closed discs.
– Discs recorded in UDF format.
Additional note for MP3 disc playback:
– The disc read time may exceed 10 seconds due to the 
large number of songs compiled onto one disc.
– Multi-session discs are supported.
– The digital output signals of MP3 files are copy 
protected.
Downloading MP3 file from the internet or copying songs 
from your own legal discs is a delicate process.
Note
Note
MP3
MP3
MP3
MP3 
						

							DISC OPERATION
34
Playing MP3 music and a JPEG picture 
simultaneously
1Load an MP3 disc containing both music and picture 
data.
→ The disc menu appears on the TV screen.
2Select an MP3 track and press h to start playback.
3During MP3 music playback, select a picture folder 
from the TV screen and press h.
→ The picture files will be played back until end of 
the folder.
4To quit simultaneous playback, press MENU followed 
by s.
– It may not be possible to play certain MP3/JPEG/ 
DivX
® discs due to the configuration and 
characteristics of the disc or condition of the 
recording.
– It is normal to experience an occasional “skip” 
while listening to your MP3 disc.
– It is normal to experience an occasional pixelation 
during DivX
® playback due to poor clarity of 
digital contents during internet downloading.
– For multi-session discs with different formats, only 
the first session will be available.
■Playing Super Audio CDs
There are three types of Super Audio CD discs: single 
layer, double layer and hybrid discs.
Each type may contain up to two areas of recorded 
information: a High Quality Stereo area and a High 
Quality Multi-channel area.
–A single layer disc can contain both information 
areas.
–A dual layer disc can contain both information 
areas. Double the information can be stored on the 
disc, thanks to the second layer.
–A hybrid disc can contain both information areas, 
and also a second, standard CD layer, making it 
playable on standard CD players.1Load the Super Audio CD.
→ The disc menu appears on the TV screen.
2Playback will start automatically.
–
 If the Super Audio CD consists of multi-channel and 
stereo tracks, multi-channel tracks will have the 
priority for playback.
–
 To playback stereo tracks, use  /  to make 
your selection from the disc menu, then press h.
Programming Super Audio CD tracks is not possible.Notes
Super Audio CD Disc 
Single layer disc
HD layerDual layer discHybrid layer disc
HD layer CD layer
HD layer
Note
1
2
3
Hybrid Super Audio CD Disc
CD layer that plays on any 
CD player
- High Quality DSD Stereo
- High Quality DSD Multi-
channel High Density layer containing: 
						

							DISC OPERATION
35
OPERATIONS
4
English
■Special features for picture disc 
playback
1Load a picture disc (Kodak Picture CD/JPEG).
→ For Kodak discs, the slide show begins.
→ For JPEG discs, the picture menu appears on the TV 
screen. 
2Press h to start the slideshow.
You have to turn on your TV and set to the correct Video In 
channel (see “Setting a TV” on page 24).
Preview function
This function shows the content of the current folder or 
the entire disc.
1During playback, press s.
→ 12 thumbnail pictures will appear on the TV 
screen.
2Press b / a to display the other pictures on the 
previous/next page.
3Use  /   /   /  to highlight one of the picture 
and press ENTER (OK) to start playback.
4Press MENU to return to the picture CD menu.
Zooming pictures
1During playback, press ZOOM repeatedly to select a 
different zoom factor.
2Use  /   /   /  to move through the zoomed 
image.
Multi-angle playback
During playback, use  /   /   /  to rotate/flip the 
picture on the TV screen.
 : flips the picture vertically.
 : flips the picture horizontally.
 : rotates the picture anti-clockwise.
 : rotates the picture clockwise.
Scan effect
Press ANGLE repeatedly to choose a different scan effect.
→ Various scan effects appear in the top left corner of the 
TV screen.
Note