Yamaha Dvx S302 Owners Manual

FUNCTIONAL OVERVIEW
6 ■Top and front panels (DVR-S300)
1STANDBY/ON
Turns on the DVD receiver, or sets it to the standby 
mode (see “Auto eco power standby mode” on 
page 28).
2
Opens/closes the disc tray.
3b / a , w / f
DVD/CD mode: selects the previous/next track or 
chapter. Press and hold to fast forward or fast reverse.
TUNER mode: tunes the radio preset up/down.
4e
DVD/CD mode: pauses disc playback.
5INPUT
Selects and input source or sets the priority level for 
the audio input signals.
6VOLUME...

FUNCTIONAL OVERVIEW
7
INTRODUCTION
1
English
■Rear panel (DVR-S300)
(U.K. and Europe models)
1AC power cord
Connect to a standard AC outlet.
2AV MONITOR OUT terminal  
(U.K. and Europe models only)
Connect to your TV (see page 19).
3VIDEO output terminal 
Connect to the video (composite) jack on your TV 
(see page 19).
4COMPONENT VIDEO OUT terminal 
Connect the the Y P
B/CB PR/CR jacks on your TV (see 
page 19).
5LINE OUT terminal
Connect to the AUDIO IN jacks on your VCR.
6TV IN terminal
Connect to the...

FUNCTIONAL OVERVIEW
8 ■Rear panel (NX-SW300)
1SYSTEM CONNECTOR terminal
Connect to the DVD receiver.
2SPEAKER terminals 
Connect to the speakers.
3AC power cord 
Connect to a standard AC outlet.
■Rear panel (NX-SW301)
1SYSTEM CONNECTOR terminal
Connect to the DVD receiver.
2SPEAKER terminals 
Connect to the speakers.
3AC power cord 
Connect to a standard AC outlet.
123
12
3 

FUNCTIONAL OVERVIEW
9
INTRODUCTION
1
English
■Remote control 
(For DVR-S300)
For details on how to use the remote control, see page 23.
1POWER (TV)
Turns on the TV, or sets it to the standby mode.
2DIMMER
Selects different levels of brightness for the display 
panel.
3Numeric keypad (0 – 9)
Enters a track/title number of the disc.
Enters a number of a preset radio station.
4REPEAT
Selects various repeat modes.
5PROG
DVD/CD mode: starts programming.
TUNER mode: starts automatic/manual preset 
programming...

FUNCTIONAL OVERVIEW
10
CAUDIO 
Selects an audio language (DVD) or an audio channel 
(VCD). 
DTV VOL (+ / –) 
Adjusts the TV volume.
ETV CH (+ / –) 
Switches the TV channel.
FTV INPUT
Switches the TV input.
GEFFECT 
Selects a sound effect.
HInput selection buttons
Selects the appropriate active source mode.
TV mode: switches to TV input. 
AUX mode: switches to AUX ANALOG/AUX 
DIGITAL input. 
TUNER mode: switches tuner (FM/AM) input.
DVD/CD mode: switches to DVD/CD mode.
IPOWER (  )
Turns on the DVD...

CONNECTIONS
11
English
PREPARATION
2■Roles and layout of the speakers
To enjoy quality sounds you need to place the speakers in their appropriate positions and install them correctly.
The following show the recommended layout of the speakers.
For the best possible surround sound, all of the speakers (except the subwoofer) should be placed at the same distance 
from the listening position. 
1Front Speakers (L, R)
Place the front left/right speakers on both sides of your TV at equal distances.
Main roles:...

CONNECTIONS
12 ■Placing the center speaker
When placing the center speaker on top of the TV, use the 
supplied fasteners to secure the speaker.
1Peel off the seals on one side of the fasteners and 
attach them to the bottom of the center speaker.
2Peel off the seals on the other side of the fasteners and 
attach them to the top of the TV.
– Do not place the speaker on the TV if the top of the 
TV is uneven or narrower than the bottom surface 
of the speaker. Doing so may cause the speaker to 
fall. In...

CONNECTIONS
13
English
PREPARATION
2
■Placing the front/surround 
speakers
Attaching to a wall
You can attach the speakers to a wall using commercially 
available screws (Diameter: 3.5 to 4 mm, Length: 25 mm 
or more). Each speaker requires two screws.
1Install two screws in the wall where you want to place 
the speaker.
2Hang the speaker on the screws using the holes in the 
back of the speaker.
– To attach a speaker to a wall using screws, the wall 
must be firm. Do not attach a speaker to a wall that...

SYSTEM CONNECTIONS
14 ■Connecting the speakers (DVX-S301)
– Do not connect the power cord of the subwoofer and DVD receiver into an AC outlet until all cable connections are completed.
– Please refer to the pages below for detailed information on how connect each speaker.  
 SYSTEM CONNECTIONS
Notes
SYSTEM 
CONNECTORTO SUBWOOFER
LR
+
–
+
–+
–
+
–+
–
Front speaker (R)NX-S301
(page 17)
Surround 
speaker (R) 
NX-S301
(page 17)Center speaker 
NX-C301
(page 17)
Subwoofer 
(NX-SW301) DVD receiver (DVR-S300)...

SYSTEM CONNECTIONS
15
English
PREPARATION
2
■Connecting the speakers (DVX-S302)
– Do not connect the power cord of the subwoofer and DVD receiver into an AC outlet until all cable connections are completed.
– Please refer to the pages below for detailed information on how connect each speaker.  
Notes
SYSTEM 
CONNECTORTO SUBWOOFERLR
+ +
+ +
+ +
+ +
Front speaker (R)
NX-S302
(page 17)
Surround 
speaker (R) 
NX-S302
(page 17)Center speaker 
NX-C302
(page 17)
Subwoofer 
NX-SW301
(page 17) DVD receiver...