Yamaha Dvx S200 Owners Manual

47
Using Other Equipment
Using Other Equipment
English
TVUse a commercially available audio cable.
CinemaStation
L
R
OUTPUT
AUDIO VIDEO
VIDEO
VIDEO 1 VCR VIDEO 2
R LIN
OUT
IN
IN
Notes on the audio jacks
• You cannot simultaneously use both IN and OUT jacks when
the jack names are the same as each other. For example, the
signal input from the VCR IN jack does not output from the
VCR OUT jack.
• CinemaStation’s digital and analog signal circuits are independent of each other, so analog input signals can...

48
Using Other Equipment
Operating a VCR
For VCR operations, read your VCR owner’s manual.
TVPOWERPOWER
AUDIO
/DTSSELECT
NIGHTSWCENTERSURR
SHIFT
STEREO
MATRIX 6.1A-BREPEAT
ANGLESUBTITLE
DVR-S200 WB56620
CINEMA
AMP
DVD/CD
VCRVIDEO 1
VIDEO 2
TUNER
MD/CD-R
MOVIE MUSIC SPORTS GAME
POWER
VCR
TVPOWERPOWER
AUDIO
/DTSSELECT
NIGHTSWCENTERSURR
SHIFT
STEREO
MATRIX 6.1A-BREPEAT
ANGLESUBTITLE
DVR-S200 WB56620
CINEMA
AMP
DVD/CD
VCRVIDEO 1
VIDEO 2
TUNER
MD/CD-R
MOVIE MUSIC SPORTS GAME
POWER
VIDEO 1
VIDEO 2
Advice
• The...

49
Using Other Equipment
Using Other Equipment
English
Dubbing from a Video Camera to a VCR
For video camera and VCR operations, be sure to read
their respective owner’s manuals.
TVPOWERPOWER
AUDIO
/DTSSELECT
NIGHTSWCENTERSURR
SHIFT
STEREO
MATRIX 6.1A-BREPEAT
ANGLESUBTITLE
DVR-S200 WB56620
CINEMA
AMP
DVD/CD
VCRVIDEO 1
VIDEO 2
TUNER
MD/CD-R
MOVIE MUSIC SPORTS GAME
POWER
VIDEO 1
VIDEO 2
Turn on the TV.
Start playback on the video camera, then start
recording with the VCR. Prepare to record with the VCR....

50
Using Other Equipment
Connecting Audio Equipment
You can connect a CD recorder or MD recorder to CinemaStation to record
audio played on CinemaStation.
Connecting a CD or MD Recorder
YPBPR
S VIDEO(DVD ONLY)COMPONENT VIDEO(480p/480i)(DVD ONLY)
MONITOROUT
IN OUT
VIDEO 2 MD/CD-RDIGITAL AUDIO OPTICAL
SUBWOOFER
OUTSYSTEM
CONNECTOR
75   
UNBAL
FM
ANT
GND
AM
ANT
OUT
IN
IN
OUTPUT OPTICALINPUTL
R
INPUTOUTPUT
Please...
• For equipment connection, read the owners manual of the equipment
you want to connect....

51
Using Other Equipment
Using Other Equipment
English
• CinemaStation cannot output a signal to the MD/CD-R OUTjacks even when receiving a signal from the MD/CD-R IN
jacks.
• CinemaStation’s digital and analog signal circuits are independent of each other, so analog input signals can only
output from analog output jacks and digital input signals can
only output from digital output jacks.
• CinemaStation’s optical digital jack is designed based on EIA
standards. If you use an optical cable that does not...

52
Using Other Equipment
• Perform a test recording before recording.
• It is not possible to record DSP effects.
• CinemaStation cannot output a Super Audio CD signal to theOPTICAL OUT jack. To record a Super Audio CD signal,
connect external devices (such as CD or MD recorder) to the
analog output jacks and use it to record the signal.
• When you turn off the connected CD recorder or MD recorder power, playback sound may become distorted and the volume
reduced. In this case, turn on the CD recorder or...

53
Using Other Equipment
Using Other Equipment
English• When using Timer Playback/Recording, even if CinemaStation is in standby mode, the m\
emory content (e.g. input source, AM/FM frequency) is retained and used.
TVPOWERPOWER
AUDIO
/DTSSELECT
NIGHTSWCENTERSURR
SHIFT
STEREO
MATRIX 6.1A-BREPEAT
ANGLESUBTITLE
DVR-S200 WB56620
CINEMA
AMP
DVD/CD
VCRVIDEO 1
VIDEO 2
TUNER
MD/CD-R
MOVIE MUSIC SPORTS GAME
POWER
Turn on the CD recorder or MD recorder power
and get ready for recording.
Recording Audio from...

54
Creating the Best Listening Space
Placing the Speakers (NX-P200)
Make sure the top of the television is level. If the top of the
television is not level, place the Center Speaker inside the
TV rack or directly on the floor. In any case, make sure it is
placed on a level surface.
When placing on top of the television, use the supplied
fastener (two pieces) as shown in the picture on the left,
between the bottom of the Center Speaker and top of the
television to fasten.
• Do not place on a television...

55
Creating the Best Listening Space
Creating the Best Listening Space
English
• One speaker weighs about 1.0 kg (2.2 lb). Make sure you fasten screws \
only into a solid wall or pillar. Do not attach to a wall
that is made of plaster, decorative veneer sheeting or other material that peels easily. If the screws come off and a speaker f alls,
somebody may get injured.
• Do not attach the speakers using nails or two-sided tape. Vibration during use may cause the nails to loosen, tape to peel off  and...

56
Creating the Best Listening Space
Use the supplied screw to attach the mounting
bracket to the bottom of the speaker.
The jutting part of the bracket enters the groove at the
speaker base.
Use the bracket holes (60 mm spacing) to fasten
the mounting bracket to the speaker stand.
Use the screws (4 mm dia.), spring washers and washers.
Mounting bracket
(supplied)Screw (supplied)
60 mm
When attaching to a speaker stand and bracket
• When attaching to a speaker stand and bracket, be sure to read their...