Yamaha Dpx 1300 User Manual

37
Menu
9
English
Menu Color
Trigger OutSets the TRIGGER OUT terminal.
Set the external control TRIGGER OUT jack 12 V signal emission to [Lamp] to
synchronize it to the ON/OFF state of the lamp, to [Fan] to synchronize it to the fan, and to
[RS-232C] to receive ON/OFF signals through the RS-232C terminal.
Choices: Lamp/Fan/RS-232C
Baud RateSets the transmission speed of the RS-232C terminal.
This setting becomes valid from the next time you switch the unit on.
Choices:...

38
Menu operations
◆Operation button functions
Use the buttons on the remote control or the main unit to operate the menus. The button functions are listed below.
1Menu Button
Opens/Closes the menu.
2Cursor button
+ / - (Move the cursor ringht/left)
•Selects menu groups.
•Opens/Closes submenus.
•Selects/Changes settings.
h / g (Moves the cursor up/down)
•Selects menu items.
•Selects/Changes settings.
3 button
•Confirms setting changes.
•Opens the in-line menu when the menu is not open.
•Selects special...

39
Menu
9
English
Menu operations
◆Menu operations 1 (with no submenu)
Menu operations use the procedure below to adjust menu item without submenus.
1. Press the MENU button to openthe menu screen.
Memo
•If you have opened the menu screen
previously, the menu displays the
settings from the last time you used it.
2. Press the + or - button to select a
menu group.
The illustration at right depicts the [Setup]
group being selected.
Menu items related to the selected menu group are displayed.
Y ou can now...

40
6. To close the menu screen when
you have finished making
adjustments, press the MENU
button. 5. Move to another item or group as
necessary.
Memo
•Press the h or g button to move the
cursor to another item in the same
group.
To move to an item in another menu
group, press the ESCAPE or h button
to return to the top of the menu group,
and repeat steps 2,3 and 4. Remote Control Main Unitor
Menu operations
4. Press the + or - button to select a
suitable setting.
The illustration at right depicts the...

41
Menu
9
English
Menu operations
◆Menu operations 2 (with submenus)
Use the procedure below to adjust menu items that contain submenus.
1. Carry out steps 1 to 3 from “MenuOperations 1” to select the menu
item you want to set.
The illustration at right depicts [Display
Language] in the [Initial] group selected.
Memo
•“” appears to the right of items that
contain a submenu.
Remote Control Main Unit or
Color System
VIDEO
INPUT A SignalINPUT A Sync TypeINPUT B SignalINPUT B Sync Type
Auto Power OffAuto...

42 
◆Special operations
Some items in the menu require special methods to configure.
VIDEOMemory 1 Initial Setup
nu Window
Gain 0.82
y
0.3 0.35
0.6 0.65x
x=0.640     y=0.330
Image SignalMove Me
n
: Edit
y
0.5
0.0
0.0 0.5 x
Red
Example: Adjusting R (Red)
The name of the
selected item appears
here.
Use the h, g, +, or -
button to select an
item.Press the 
 button.
Press the ESCAPE
button.Color coordinate
display area
Color coordinate
adjustment area
Press the  button to
change the item to adjust.
Gain...

43
Menu
9
English
Menu operations
1. Select [Color Adjustment] in the [Image] group from the main menu.
2. Press the + button to enter submenus.
3. Select  [WRGB] from the [Standard], [WRGB], [WRGBYCM] using the h or  g button, and press
the + button.
4. Press the  h, g , +, or - button to select W (Color temperature and  h UV)  from the color scale,
and press the 
 button.
The color temperature adjustment area on the right side of the menu scre\
en will be highlighted in white.
5. Press the  h, g , +,...

44 
Reset the selected settings to the default settings.
VIDEOESC : Return
Image
Memory 1 Signal Initial SetupMove Menu Window
VIDEO
Image
Memory 4 Signal Initial SetupMove Menu Window
Press        to reset 
to factory settings.
ESC : Return
1. Select the item you wish to reset to the default setting
from the main menu.
2. Press the RESET button on the remote control to reset
to the default setting (resetting does not affect items
with no default setting).
Memo
•The RESET button has a special function...

45
Menu
9
English

Reset the [Lamp Running Time] displayed on screen to “0”.
VIDEO
Special Image Signal Initial SetupMove Menu Window
Memory 1 Cinema Zoom
Cinema Squeeze
14:9 ZoomSubtitle Zoom
+ : Enter

Use the [Subtitle Area] menu to adjust the size of the subtitle display area. Use [V Scroll] to adjust the vertical position of the subtitle display.
1.  From the menu screen, select [Signal] 
 [Display
Aspect Ratio] 
 [Special].
2.  Press the + button to enter the lower level selection
menu.
3.  Select...

46
5. Press the + button to enter the lower level selection
menu.
6. Press h or g button to select [Subtitle Area] or [V
Scroll].
7. Press the + or – button to select a suitable setting.
Memo
•Press the h or g button to move to a different menu item in
the [Subtitle Zoom] menu.
8. Press the ESCAPE button to return to the higher level
selection menu.
VIDEO
Image Signal Initial SetupMove Menu Window
Memory 1
ESC : Return
Subtitle AreaV Scroll0
0
Subtitle Zoom
Press the  button
1. From the menu screen,...