Yamaha Dpx 1100 User Manual
Have a look at the manual Yamaha Dpx 1100 User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 255 Yamaha manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
![Page 60
56
Troubleshooting
CauseRemedyProblem
Image is unstable.
The image becomes
cloudy.
Cannot adjust focus or
zoom, or the vertical
position of the lens.
Remote control does
not work correctly.
There is condensation on the DPX-1100.
[Lens Adjustment Lock] in the menu is set
to ON.
The batteries are exhausted.
The remote control sensor is not set
correctly.
There is a fluorescent lamp near the
remote control sensor being used.
The remote control code switch is
incorrectly set.
Switch the DPX-1100 power off...](http://img.usermanuals.tech/thumb/83/58778/w64_yamaha_dpx-1100_dlp-user-manual-59.png "Page 60
56
Troubleshooting
CauseRemedyProblem
Image is unstable.
The image becomes
cloudy.
Cannot adjust focus or
zoom, or the vertical
position of the lens.
Remote control does
not work correctly.
There is condensation on the DPX-1100.
[Lens Adjustment Lock] in the menu is set
to ON.
The batteries are exhausted.
The remote control sensor is not set
correctly.
There is a fluorescent lamp near the
remote control sensor being used.
The remote control code switch is
incorrectly set.
Switch the DPX-1100 power off...")
57 Reference 11 CauseRemedyProblem Troubleshooting FAN warning indicator lights up. TEMP warning indicator lights up. COVER warning indicator lights up. LAMP warning indicator lights up or blinks. The fan is broken. The temperature inside the DPX-1100 is extremely high. The filter cover is not correctly attached. The lamp cover is not correctly attached. Lamp running time has exceeded 2000 hours. The lamp has burned out. Contact the store where the DPX-1100 was purchased. Check that the ventilation slots are not covered. Tightly attach the filter cover. Tightly attach the lamp cover. Replace the lamp with a new one. Replace the lamp with a new one. •This unit uses a DMD TM chip for the picture display. Their highly accurate technology makes it possible to keep more than 99.99% of effective pixels, however, unexpectedly it can produce less than 0.01% of ineffective pixels. In such a case, missing or flashing of a few pixels can be found on the screen. These are characteristics of DMD TM , not mechanical problems. 14_DPX-1100_E.p652004.05.25, 18:01 57
58 Message display MessageCondition No Signal Memory 1—6 Now Processing The lamps has reached its recommended replacement time. Please replace with a new one. Invalid Operation Lens Adjustment is locked. INPUT A (Component) (Example) Auto Sync... Out Of Range Unknown Format Press again to enter standby. The memory setting number is displayed for 2 seconds. This message is displayed when the power switch is turned on if the lamp running time exceeds 2000 hours. Press the ESCAPE button to remove the message. This message will display for 2 seconds if you press the V. POS, ZOOM, or FOCUS buttons when the [Lens Adjustment Lock] is set to [On]. Appears in the menu operation guide when you press an invalid button during menu operation. This message displays for 2 seconds. The unit is not receiving or detecting any signal at the selected input jack. This message is displayed together with the name of the input source selected with the INPUT button. The input name selected by the INPUT button is displayed. It will turn off 2 seconds after the signal has been input. The unit is setting itself to the most appropriate configuration for the RGB signal currently being received. The unit is not able to decode the PC or HDMI signal currently being input. The unit is not able to decode the video signal currently being input. Press the STANDBY/ON button once more to place the unit in standby mode. 14_DPX-1100_E.p652004.04.16, 13:01 58
59 Reference 11 LED indicator meanings (*) This LED is also present on the front panel of the main unit. LED indicatorState Unlit Lit orange Blinking green Meaning Lit green Blinking orange Blinking red Unlit Lit red Unlit Lit red Unlit Lit red Unlit Lit red Blinking orange STANDBY/ON (*) LAMP COVER TEMP FA N Electrical fault. Standby Preparing for operation. Operating Cooling the lamp. When the LAMP/COVER/TEMP/FAN indicator is lit red. Normal The lamp has burned out. Normal The lamp cover or the filter cover is not attached correctly. Normal The temperature of the lamp or the interior of the case is abnormally high. Normal The cooling fan has broken. The lamp running time has exceeded 2000 hours. 14_DPX-1100_E.p652004.04.16, 13:01 59
60 Specifications Usable temperature range Usable humidity range Power supply Power consumption Power consumption in standby mode Noise level Dimension Weight 5 °C – 35 °C 30 % – 85 %(There should be no condensation) AC100 – 120 V/220 – 240 V, 50/60 Hz 375 W 0.1 W – 0.2 W 30 dB(Standard mode), 28 dB(When Lamp Power Mode is set to 80) 495(W) x 192.6(H) x 465.4(D) mm 13.8 kg • General Wireless remote Wired remote1 in front, 1 at rear 1 input jack, 1 output jack Remote TriggerRS-232C (D-sub 9 pins) +12 V/Max 200 mA when the power is on • Controls • Input HDMIDigital RGB/component signal Projection mode Lens Lamp Screen size Brightness Contrast DLPTM (DMDTM) type, 1280 X 720 pixels, 0.8 inch f=24.3 – 38.9 mm F=2.7 – 5.0, Electronic zoom(x 1.6), Electronic focus, Electronic lens shift 270 W SHP lamp 60–200 inch (16:9) 800 – 400 ANSI lm (depends on Iris Setting) 2000:1(Default mode), 4000:1(depends on Iris Setting) • Optical Color system VIDEOComposite signal1Vp-p/75 Ω, Negative sync S-Video signal Component signal Component signal RGB signal S VIDEO D4 VIDEO INPUT A/INPUT B Y:1Vp-p/75 Ω, Negative sync C:0.286 or 0.3Vp-p/75 Ω Y with sync:1Vp-p/75 Ω, Negative sync (480i, 576i, 480p, 576p) Y with sync:1Vp-p/75 Ω, 3 values sync (1035i, 1080i, 720p) P B/CB, PR/CR:0.7Vp-p/75 Ω Y with sync:1Vp-p/75 W, Negative sync (480i, 576i, 480p, 576p) Y with sync:1Vp-p/75 W, 3 values sync (1035i, 1080i, 720p) P B/CB, PR/CR:0.7Vp-p/75 Ω G with sync:1Vp-p/75 Ω, Negative sync (480i, 576i, 480p, 576p) G with sync:1Vp-p/75 Ω, 3 values sync (1035i, 1080i, 720p) G:0.7Vp-p/75 Ω (When using HD/VD or SYNC) B, R:0.7Vp-p/75 Ω HD, VD:1–5Vp-p/2.2kΩ, positive and negative sync SYNC:2Vp-p/2.2kΩ, Negative sync (with video signals) (480i, 576i) SYNC:0.6–5Vp-p/2.2kΩ, Negative sync (without video signals) (480i, 576i, 480p, 576p) NTSC, PAL, SECAM, NTSC4.43, PAL-M, PAL-N, PAL60 14_DPX-1100_E.p652004.04.16, 13:01 60
61 Reference 11 Specifications are subject to change without notice. •This unit may interfere with reception if placed in close proximity to a radio or television receiver. Follow the instructions in this manual to install the unit correctly. STANDBY/ON SETTING LAMP COVER TEMP FAN PATTERN ESCAPE MENU INPUTDIGITAL CINEMA PROJECTOR DPX-1000ASPECT HDMI G/Y B/P B/CBR/PR/CRINPUT A HD/SYNC VDOUT IN REMOTE TRIGGER OUT S VIDEO VIDEO INPUT B RGB/YPBPR/YCBCR RS-232C D4 VIDEO 465.4 18-5/16 124.6 4-7/8 119.1 4-3/5 124 4-7/8 297.4 11-3/4132.1 5-3/16 495 19-1/2 360 14-3/16 192.6 7-9/16 237.5 9-3/8 10 3/8 (257.5 10-1/8) Dimensional drawing 14_DPX-1100_E.p652004.04.16, 13:01 61
YAMAHA ELECTRONICS CORPORATION, USA 6660 ORANGETHORPE AVE., BUENA PARK, CALIF. 90620, U.S.A. YAMAHA CANADA MUSIC LTD. 135 MILNER AVE., SCARBOROUGH, ONTARIO M1S 3R1, CANADA YAMAHA ELECTRONIK EUROPA G.m.b.H. SIEMENSSTR. 22-34, 25462 RELLINGEN BEI HAMBURG, F.R. OF GERMANY YAMAHA ELECTRONIQUE FRANCE S.A. RUE AMBROISE CROIZAT BP70 CROISSY-BEAUBOURG 77312 MARNE-LA-VALLEE CEDEX02, FRANCE YAMAHA ELECTRONICS (UK) LTD. YAMAHA HOUSE, 200 RICKMANSWORTH ROAD WATFORD, HERTS WD18 7GQ, ENGLAND YAMAHA SCANDINAVIA A.B. J A WETTERGRENS GATA 1, BOX 30053, 400 43 VÄSTRA FRÖLUNDA, SWEDEN YAMAHA MUSIC AUSTRALIA PTY, LTD. 17-33 MARKET ST., SOUTH MELBOURNE, 3205 VIC., AUSTRALIA Printed in Japan WC71040-1 C2004 All Rights Reserved. 10_DPX-1000-Cover1-4_E.p652004.03.31, 13:13 1