Yamaha Dpx 1100 User Manual

37
Menu
7

Reset parameters to the default settings.
VIDEOESC : Return
Image
Memory 1 Signal Initial SetupMove Menu Window
Menu operations
VIDEO
Image
Memory 4 Signal Initial SetupMove Menu Window
Press        to reset 
to factory settings.
ESC : Return
1. From the main menu, select the item you wish to reset
to the default setting.
2.
Press the RESET button on the remote control to reset to the default
settings (resetting does not affect items with no default setting).
Memo
•The RESET button has a...

38 
Reset the [Lamp Running Time] displayed on screen to “0”.
VIDEO
Special Image Signal Initial SetupMove Menu Window
Memory 1 Cinema Zoom
Cinema Squeeze
14:9 ZoomSubtitle Zoom
+ : Enter
Menu operations

Use the [Subtitle Area] menu to adjust the size of the subtitle display area. Use [V Scroll] to adjust the vertical position of the subtitle display.
1. From the menu screen select [Signal] 
 [Display
Aspect Ratio] 
 [Special].
2.Press the + button to enter lower level menu items.
3. Select [Subtitle...

39
Menu
7
5. Press the + button to enter lower level selection
menus.
6.
Use h or g buttons to select [Subtitle Area] or [V Scroll].
7. Use the + or – buttons to select a suitable setting.
Memo
•Press h or g buttons to move to a different menu item within
the [Subtitle Zoom] menu.
8. Press the ESCAPE button to return to a higher level
menu.VIDEO
Image Signal Initial SetupMove Menu Window
Memory 1
ESC : Return
Subtitle AreaV Scroll0
0
Subtitle Zoom
Menu operations
Press the  button
1. From the menu...

40

 Adjusting image quality using the inline menu
Use the inline menu to adjust image quality without obstructing the image during projection. See “Menu group items and functions” (pages
25-31) for information on each setting.

Black Level
Inline menu item
Indicate that you can use the h and g buttons to change
the position of the inline menu.
Press the + or - buttons to set the item to an appropriate setting. Press the
RESET button to return the item to its default setting.

1. Press the  button when...

41
Memory function
8
The memory function automatically saves the settings of menu items listed in the table below.

 Memory configurations
The DPX-1100 can store up to 6 sets of configurations, called memory numbers, for each input jack.  For each memory number the DPX-
1100 stores a specific configuration for each signal type, giving a total of 72 possible configurations.

 Recalling a memory number


 Saving memory settings
All memory numbers have default settings. The unit saves any changes to menu...

42
OffLMLMHH
abcde
Memory 1VIDEO 0
0
0100
WRGB 4
+ : EnterImage Signal Initial SetupMove Menu Window
Black Level
White Level
Gamma Trim
Hue
Saturation
Sharpness Type
Sharpness Gain
Level Adjustment Iris Color Adjustment
White Peaking
0
6500K +
0.000uv-
2. Press the g button to select
“Memory number status” from the
bottom of the screen.
3. Press the + button to open the
submenu.
Remote Control Main Unitor
5. Press the  button to call the
memory number you selected. 4. Press theh or g buttons to select
a...

43
Memory function
8 
 Memory lock
The unit has a lock function you can set so that it does not accidentally overwrite information stored in its memory. You can set the lock
function for each memory number, and additionally for each SDTV/HDTV/RGB-PC input.

1. Select the memory number you
wish to lock.
2. Select a memory number status.
3. Press the 
 button.
A 
 mark appears beside locked memory
numbers.
Memo
•To lock another memory number,
select another memory number ( page
41-42) and repeat steps 2...

44
VIDEO
Image
Memory 4 Signal Initial SetupMove Menu Window
ESC : ReturnPress        to reset current memory.
1. From the main menu, select
[Initial] 
 [Reset]  [Current
Memory].
VIDEO+ : Enter
ResetAll Settings
All Memory
Current Memory Image
Memory 4 Signal Initial SetupMove Menu Window
2. Press the + button to display a
confirmation screen.
3. Press the 
 button to return the
parameters to their default
settings.
Remote Control Main Unitor
Remote Control Main Unitor

 Resetting to the default...

45
Memory function
8

Return the all memory contents to the default settings regardless of the input jack or input signal.
1. From the main menu, select
[Initial] 
 [Reset]  [All
memory].
VIDEO
Reset
+ : EnterAll SettingsAll MemoryCurrent Memory
Image
Memory 4 Signal Initial SetupMove Menu Window
2. Press the + button to display a
confirmation screen.
3. Press the 
 button to return the
parameters to their default
settings.
Remote Control Main Unitor
Remote Control Main Unitor
VIDEO
Image
Memory 4 Signal...

46
Connecting to AV components
This unit is equipped with 6 types of video input jacks for AV components. Follow the diagram to connect AV components to this unit, taking
care to use cables and adapters that match the input jacks.
Warning
•Be sure to turn off the power of this unit and the source component before attempting connection.
•Connection methods and jack names may differ depending on the component you are attempting to connect. Refer to the owner’s
manual for the component.
•Insert all plugs...