Yamaha Clavinova Cvp 5 Manual

CVP-509/505/503/501 Owner’s Manual21
Starting Up
These buttons are used mainly to change the Pages of displays that have “tabs” at the 
top.
The [1 ▲▼] – [8 ▲▼] buttons are used to make selections or adjust settings (up or 
down correspondingly) for functions shown directly above them.
TAB [E][F] buttons
[1 ▲▼] – [8  ▲▼] buttons
If a menu appears 
in this section of 
the display, use 
the [1 ▲] – [8  ▲] 
buttons.
If a menu appears 
in this section of 
the display, use the 
[1  ▼] – [8  ▼] but-
tons. If...

22 CVP-509/505/503/501 Owner’s Manual
Starting Up
Depending on the selected LCD display, the [DATA ENTRY] dial can be used in the 
following two ways.
• Selecting files (Voice, Style, Song, and so on)When one of the File Selection displays (page 26) is shown, you can use the 
[DATA ENTRY] dial and the [ENTER] button to select a file (Voice, Style, Song, 
and so on). 
• Adjusting the parameter values You can conveniently use the [DATA ENTRY] dial in tandem with the [1 ▲▼] –
[8 ▲▼] buttons to adjust...

CVP-509/505/503/501 Owner’s Manual23
Starting Up
A message (information or confirmation dialog) sometimes appears on \
the screen to 
facilitate operation. When the message appears, simply press the appropriate button.
With the convenient Direct Access function, you can instantly call up the desired 
display — with just a single additional button press.
1Press the [DIRECT ACCESS] button.
A message appears in the display prompting you to press the appropriate \
button.
2Press the button or pedal...

24 CVP-509/505/503/501 Owner’s Manual
Starting Up
The display that appears when the power is turned on is the Main display. The Main 
display shows the current basic settings such as the currently selected Voice and 
Style, allowing you to see them at a single glance. The Main display is the one you’ll 
usually see when you play the keyboard.
1Voice name
Displays the Voice names currently selected for RIGHT 1, RIGHT 2 and LEFT 
parts (page 37). Pressing one of the [A] – [C] and [F] – [I] buttons calls up...

CVP-509/505/503/501 Owner’s Manual25
Starting Up
8TEMPO/BAR/BEATDisplays the current position (tempo/bar/beat) in Style playback or So\
ng 
playback.
9USB Audio information (CVP-509/505/503)Displays information for the selected audio file (file name, time, \
etc.) While 
recording, a “REC” indication appears.
)Registration SequenceAppears when the Registration Sequence (page 82) is active.NOTE
For detailed information about the 
Registration Sequence, refer to the 
Reference manual on the website. 

26 CVP-509/505/503/501 Owner’s Manual
Starting Up
The File Selection display is for selecting Voice, Styles, and other data. The File 
Selection display appears when you press one of the VOICE or STYLE category 
selection buttons, SONG [SELECT] button, etc.
1Location (drive) of dataPRESET Location where pre-programmed (preset) data is stored.
USER Location where recorded or edited data is saved.
USB Location where data on USB storage device (USB flash memory, 
floppy disk, etc.) is saved.This appears only...

CVP-509/505/503/501 Owner’s Manual27
Starting Up
The instructions that follow show you how to enter characters for naming your files/
folders, inputting keywords, etc. Entering characters should be done in the display 
shown below.
1Change the type of character by pressing the [1 ▲] button.
If you select a language other than Japanese as the Language (page 17)\
, the 
following different types of characters are available:
• CASE capital letters, numbers, marks 
• case lowercase letters, numbers, marks
If...

28 CVP-509/505/503/501 Owner’s Manual
Starting Up
2Use the [DATA ENTRY] dial to move the cursor to the desired 
position.
3Press the [2 ▲▼] – [6  ▲▼] and [7  ▲] buttons, corresponding to 
the character you wish to enter.
To  actually enter the selected character, move the cursor or press another letter-
input button. Alternately, you can wait for a short time and the characters will be 
entered automatically.
For details on entering characters, refer to “Other character-entry operations” 
below.
4Press...

CVP-509/505/503/501 Owner’s Manual29
Starting Up
While holding the C7 key (right-most key on the keyboard), turn the power on.
This restores the all settings (except Internet Settings, etc.) to the factory default. 
You can also restore a specified setting to the factory default value, or save/load your 
own reset settings. Call up the operation display: [FUNCTION]  → [J] UTILITY → 
TAB [E][F] SYSTEM RESET. For details, refer to the Reference Manual on the 
website.
This procedure backs up all data stored...

1
30 CVP-509/505/503/501 Owner’s Manual
Perform the piano songs by Clavinova
Perform the piano songs by 
Clavinova
Here, we’ll call up and play the piano voice. You can play the piano voice using 
the pedals or metronome.
This convenient, easy-to-use feature completely and automatically reconfigures \
the 
entire instrument for optimum piano performance. No matter what settings\
 you’ve 
made from the panel, you can instantly call up the piano settings by a s\
ingle button 
press.
Press the piano-shaped...