Yamaha Bbt 500 H Manual
Have a look at the manual Yamaha Bbt 500 H Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 255 Yamaha manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
![Page 12
12
The BBT500H also features more precise settings for defining the fre-
quencies for each of the Tone Control knobs, operating the Compressor
and Noise Gate, or setting the Blend Level of the effect loop, etc.
To access these settings, press the [FUNCTION] switch and use the
four Modes described below.
•Amp Mode
In this mode, each knob functions in the manner it is labeled on the
front panel.
•Equalizer Mode
This mode is used to set the 1-band parametric equalizer and the
center frequency for each of...](http://img.usermanuals.tech/thumb/83/104845/w64_bbt-500-h-manual-1525957981_d-11.png "Page 12
12
The BBT500H also features more precise settings for defining the fre-
quencies for each of the Tone Control knobs, operating the Compressor
and Noise Gate, or setting the Blend Level of the effect loop, etc.
To access these settings, press the [FUNCTION] switch and use the
four Modes described below.
•Amp Mode
In this mode, each knob functions in the manner it is labeled on the
front panel.
•Equalizer Mode
This mode is used to set the 1-band parametric equalizer and the
center frequency for each of...")
![Page 13
13
Compressor Mode
The Compressor Mode provides settings for the Compressor, Noise Gate,
and Blend Level for the effect loop.
To enter the Compressor Mode, press and hold the [FUNCTION] switch
until the knob functions are displayed in the upper row of the panel dis-
play above the knobs (the row above that used by the Equalizer Mode).
How Knobs Function in the Compressor
Mode
qINPUT LEVEL: Sets the Input Level
wSOUND TYPE: No function.
eCOMP (RATIO): Compression ratio (1.0 - ∞, 16 steps) *operates the...](http://img.usermanuals.tech/thumb/83/104845/w64_bbt-500-h-manual-1525957981_d-12.png "Page 13
13
Compressor Mode
The Compressor Mode provides settings for the Compressor, Noise Gate,
and Blend Level for the effect loop.
To enter the Compressor Mode, press and hold the [FUNCTION] switch
until the knob functions are displayed in the upper row of the panel dis-
play above the knobs (the row above that used by the Equalizer Mode).
How Knobs Function in the Compressor
Mode
qINPUT LEVEL: Sets the Input Level
wSOUND TYPE: No function.
eCOMP (RATIO): Compression ratio (1.0 - ∞, 16 steps) *operates the...")
![Page 14
14
Utility Mode
The Utility Mode provides settings for the Crossover Filter and MIDI.
These settings are saved internally when you exit the Utility Mode and
kept even when the amplifier’s power is switched OFF.
Entering the Utility Mode
To enter the Utility Mode, from any mode press and hold the [FUNC-
TION] switch for more than 3 seconds, until “
utL” appears on the dis-
play.
INPUTTUNER
OUTSPEAKER
First amplifier (HPF 500Hz)
Second amplifier (LPF500Hz)
SPEAKERProduces
higher
frequencies
above 500Hz...](http://img.usermanuals.tech/thumb/83/104845/w64_bbt-500-h-manual-1525957981_d-13.png "Page 14
14
Utility Mode
The Utility Mode provides settings for the Crossover Filter and MIDI.
These settings are saved internally when you exit the Utility Mode and
kept even when the amplifier’s power is switched OFF.
Entering the Utility Mode
To enter the Utility Mode, from any mode press and hold the [FUNC-
TION] switch for more than 3 seconds, until “
utL” appears on the dis-
play.
INPUTTUNER
OUTSPEAKER
First amplifier (HPF 500Hz)
Second amplifier (LPF500Hz)
SPEAKERProduces
higher
frequencies
above 500Hz...")
![Page 16
16
Detailed Parameter Settings
MIDI Merge Settings
If you want MIDI signals received by the BBT500H’s MIDI IN jack trans-
mitted without alteration to other MIDI devices connected to the BBT500H’s
MIDI OUT jack, set the MIDI Merge to “on”, if not, set it to “oFF”.
1
Press and hold the [FUNCTION] switch for more than three sec-
onds (until “
utL” appears on the display) to enter the Utility Mode.
2 While holding the [MANUAL] switch, press Memory Switch [4].
The current MIDI Merge setting appears on the...](http://img.usermanuals.tech/thumb/83/104845/w64_bbt-500-h-manual-1525957981_d-15.png "Page 16
16
Detailed Parameter Settings
MIDI Merge Settings
If you want MIDI signals received by the BBT500H’s MIDI IN jack trans-
mitted without alteration to other MIDI devices connected to the BBT500H’s
MIDI OUT jack, set the MIDI Merge to “on”, if not, set it to “oFF”.
1
Press and hold the [FUNCTION] switch for more than three sec-
onds (until “
utL” appears on the display) to enter the Utility Mode.
2 While holding the [MANUAL] switch, press Memory Switch [4].
The current MIDI Merge setting appears on the...")
![Page 20
95
YAMAHA [ Bass Amplifier ] Date:23-Dec-2003
Model BBT500H MIDI Implementation Chart Version : 1.0
+----------------------------------------------------------------------+
: : Transmitted : Recognized : Remarks :
: Function ... : : : :
:-------------------+----------------+----------------+----------------:
:Basic Default : x : 1 - 16, off : memorized...](http://img.usermanuals.tech/thumb/83/104845/w64_bbt-500-h-manual-1525957981_d-19.png "Page 20
95
YAMAHA [ Bass Amplifier ] Date:23-Dec-2003
Model BBT500H MIDI Implementation Chart Version : 1.0
+----------------------------------------------------------------------+
: : Transmitted : Recognized : Remarks :
: Function ... : : : :
:-------------------+----------------+----------------+----------------:
:Basic Default : x : 1 - 16, off : memorized...")
