Yamaha Audiogram 6 User Manual

 1 
AUDIOGRAM 6 Owner’s Manual AUDIOGRAM 6 
Owner’s Manual
C0 (10.11.30) 
English
Deutsch
Français
Español
Russian
ÔŠ 
Owner’s Manual
Bedienungsanleitung
Mode d’emploi
Manual de instrucciones
Руководс\bво поль\fова\bе\аля
	{
†Ì	{
USB AUDIO INTERFACE
Русский
English
Deutsch
Français
Español
ÔŠ 
FR
ES
RU
JA
EN
DE
BVEJPHSBN@FOCPPL 1BHF  5IVSTEBZ
 %FDFNCFS 
   1. 

2AUDIOGRAM 6 Owner’s Manual
1.  IMPORTANT NOTICE: DO NOT MODIFY THIS UNIT!
This product, when installed as indicated in the 
instructions contained in this manual, meets FCC 
requirements. Modifications not expressly approved 
by Y amaha may void your authority, granted by the 
FCC, to use the product.
2. IMPORTANT: When connecting this product to 
accessories and/or another product use only high 
quality shielded cables. Cable/s supplied with this 
product MUST be used. Follow all installation instruc-...

3AUDIOGRAM 6 Owner’s Manual
PRECAUTIONS
PLEASE READ CAREFULLY BEFORE PROCEEDING 
* Please keep this manual in a safe place for future reference.
 WARNING
Always follow the basic precautions listed below to avoid the possibilit\
y of serious injury or even death from electrical 
shock, short-circuiting, damages, fire or other hazards. These precaut\
ions include, but are not limited to, the 
following:
• Do not open the device or attempt to disassemble the internal parts or modify them in any way. The...

4AUDIOGRAM 6 Owner’s Manual
Always unplug the USB cable from a computer or turn off the computer to \
turn off the device when the device is not in use.
The performance of components with moving contacts, such as switches, vo\
lume controls, and connectors, deteriorates over time. Consult 
qualified Yamaha service personnel about replacing defective components.
Specifications and descriptions in this owner’s manual are for information purposes only. Yamaha Corp. reserves the right to change or modify...

5AUDIOGRAM 6 Owner’s Manual
Introduction ................................................................. 5
Contents ........................................................................\
............... 5
Features ........................................................................\
............... 6
Setup ........................................................................\
.... 7
Quick Guide................................................................. 8
1. Installing Cubase AI...

Introduction
6AUDIOGRAM 6 Owner’s Manual
Connect To Your Computer via a Single USB Cable (page 8)
The AUDIOGRAM interface connects to your computer via the supplied USB cable. Stereo audio data is 
transferred in both directions—from the interface to the computer, and vice-versa—via the USB connection 
(44.1 kHz or 48 kHz sampling frequency).
No Driver Installation Required (page 8)
The AUDIOGRAM system uses the standard drivers included in your computer’s operating system, so 
there’s no need to install...

7AUDIOGRAM 6 Owner’s Manual
Setup
MicrophoneGuitar CD player
Ke
yboard, etc.
ComputerHeadphones
Pow
ered speakers
To  connect a device such 
as a microphone:
To  connect an instrument 
such as an electric guitar 
or bass: USB cable
Cubase AI
Be sure to turn the PHANTOM 
+48V switch (★) on when 
using a phantom-powered 
condenser microphone. 

8AUDIOGRAM 6 Owner’s Manual
Quick Guide
This quick setup and operation guide covers everything from installing t\
he Cubase AI software to using
Cubase AI for recording and mixdown. While going through this section yo\
u might find it useful to also
refer to the “Controls and Functions” section on page 15, as well \
as the pdf manual supplied with the
Cubase AI software.
You are only permitted to use this software pursuant to the terms and conditions of the 
“Steinberg Software End User License Agreement...

Quick Guide
9AUDIOGRAM 6 Owner’s Manual
To  prevent loud pops and noises, turn on the power 
to your sound gear starting with the sources 
(instruments, CD players, etc.) and ending with the 
monitor speakers (powered speakers).
1Turn on the instruments and microphones.
2If you are using a condenser microphone for 
the channel 1, turn on the PHANTOM +48V 
switch.
Observe the following precautions when 
turning on phantom power.
• Make sure that the PHANTOM +48V switch 
is off when phantom power is not...

Quick Guide
10AUDIOGRAM 6 Owner’s Manual
This section describes the procedure for recording to the Cubase AI software we installed earlier via the 
AUDIOGRAM interface.
Cubase AI 6 is used for the examples in this manual. For details about other versions of Cubase AI or
Cubase AI operation in general, refer to the PDF manual provided with the software.
Cubase AI Setup
1Set the computer output to the maximum 
level.
For details on how to make the setting refer to the 
“The recorded sound is too low in...