Yamaha 01v 96 I Manual

Initial Parameter to Control Change Table171
01V96i—Reference Manual
Appendix: MIDICHANNEL15
# High Mid Low
0 NO ASSIGN
1 SURROUND LR INPUT1
2 SURROUND LR INPUT2
3 SURROUND LR INPUT3
4 SURROUND LR INPUT4
5 SURROUND LR INPUT5
6 SURROUND LR INPUT6
7 SURROUND LR INPUT7
8 SURROUND LR INPUT8
9 SURROUND LR INPUT9
10 SURROUND LR INPUT10
11 SURROUND LR INPUT11
12 SURROUND LR INPUT12
13 SURROUND LR INPUT13
14 SURROUND LR INPUT14
15 SURROUND LR INPUT15
16 SURROUND LR INPUT16
17 SURROUND LR INPUT17
18 SURROUND LR...

172Appendix: MIDI
01V96i—Reference Manual
CHANNEL16
#High Mid Low
0 NO ASSIGN
1 SURROUND LR INPUT25
2 SURROUND LR INPUT26
3 SURROUND LR INPUT27
4 SURROUND LR INPUT28
5 SURROUND LR INPUT29
6 SURROUND LR INPUT30
7 SURROUND LR INPUT31
8 SURROUND LR INPUT32
9 SURROUND LR ST-IN1L
10 SURROUND LR ST-IN1R
11 SURROUND LR ST-IN2L
12 SURROUND LR ST-IN2R
13 SURROUND LR ST-IN3L
14 SURROUND LR ST-IN3R
15 SURROUND LR ST-IN4L
16 SURROUND LR ST-IN4R
17 NO ASSIGN
18 NO ASSIGN
19 NO ASSIGN
20 NO ASSIGN
21 NO ASSIGN
22 NO...

MIDI Data Format173
01V96i—Reference Manual
Appendix: MIDI
MIDI Data Format
1. DATA FORMAT
1.1 CHANNEL MESSAGE
1.2 SYSTEM COMMON MESSAGE
1.3 SYSTEM REALTIME MESSAGE
1.4 EXCLUSIVE MESSAGE
1.4.1 Real Time System Exclusive
1.4.2 System Exclusive Message
1.4.2.1 Bulk Dump
The following data types of bulk dump are used on the 01V96i.
1.4.2.2 PARAMTER CHANGE
The following data types of parameter change are used by the 01V96i.
* ‘tx’ indicates that the data can be transmitted from the 01V96i, and 
‘rx’...

174Appendix: MIDI
01V96i—Reference Manual
If [TABLE] is selected
If [NRPN] is selected
*1) The second and subsequent STATUS need not be added during 
transmission. Reception must be implemented so that reception oc-
curs whether or not STATUS is present.
2.4 PROGRAM CHANGE (Cn)
Reception
If [Program Change ECHO] is ON, these messages are echoed from MIDI 
OUT.
If [Program Change RX] is ON and the [Rx CH] matches, these messages will 
be received. However if [OMNI] is ON, they will be received regardless...

MIDI Data Format175
01V96i—Reference Manual
Appendix: MIDI
2.8.2.2 Scene memory bulk dump request format 
(compress)
The second and third bytes of the DATA NAME indicate the scene number that 
is being requested. If this is 256, the data of the Edit Buffer will be bulk-dumped. 
If this is 8192, the data of the Undo Buffer will be bulk-dumped.
2.8.2.3 Setup memory bulk dump format
Of the setup memory of the 01V96i, this bulk-dumps data other than the User 
Define MIDI Remote, User Defined Keys, User...

176Appendix: MIDI
01V96i—Reference Manual
2.8.2.8 User Defined Keys bulk dump request format
The second and third bytes of the DATA NAME indicate the bank number.
2.8.2.9 User Assignable Layer bulk dump format
The second and third bytes of the DATA NAME indicate the bank number.
Be aware that the state of the transmission destination will (in some cases) 
change if the same bank is being used.
2.8.2.10 User Assignable Layer bulk dump request format
The second and third bytes of the DATA NAME indicate the...

MIDI Data Format177
01V96i—Reference Manual
Appendix: MIDI2.8.2.13 Program change table bulk dump format
2.8.2.14 Program change table bulk dump request format
2.8.2.15 Equalizer library bulk dump format
The second and third bytes of the DATA NAME indicate the bank number.
0:Library no.1 – 199:Library no.200,
256:CH1 – 287:CH32, 288:STEREO 1L – 295:STEREO 4R, 384:BUS1 – 
391:BUS8, 512:AUX1 – 519:AUX8, 768:STEREO, 8192:UNDO
256 and following are data for the corresponding channel of the edit buffer.
For...

178Appendix: MIDI
01V96i—Reference Manual
2.8.2.18 Compressor library bulk dump request format
The second and third bytes of the DATA NAME indicate the bank number. (See 
above)
2.8.2.19 Gate library bulk dump format
The second and third bytes of the DATA NAME indicate the bank number.
0:Library no.1 – 127:Library no.128, 256:CH1 – 287:CH32, 8192:UNDO
256 and following are data for the corresponding channel of the edit buffer.
For reception by the 01V96i, only the user area is valid. (4-127, 256-)...

MIDI Data Format179
01V96i—Reference Manual
Appendix: MIDI
2.8.2.24 Channel library bulk dump request format
The second and third bytes of the DATA NAME indicate the bank number. (See 
above)
2.8.2.25 Input patch library bulk dump format
The second and third bytes of the DATA NAME indicate the bank number.
0:Library no.0 – 32:Library no.32, 256:current input patch data, 8192:UNDO
For reception by the 01V96i, only the user area is valid. (1-32, 256, 8192)
2.8.2.26 Input patch library bulk dump request...

180Appendix: MIDI
01V96i—Reference Manual
2.8.2.29 Plug-in effect card bulk dump format
The second byte of the DATA NAME indicates the slot number.
0:SLOT 1
The data is not received if the Developer ID and Product ID are different than 
the card that is installed in the slot.
The data is not transmitted if a valid plug-in effect card is not installed.
2.8.2.30 Plug-in effect card bulk dump request format
The second and third bytes of the DATA NAME indicate the slot number. (See 
above)
2.8.3  PARAMETER...