Xerox Xm7 22w Users Guide

							
10Xerox© LCD Monitor User’s Manual
Introduction

Make sure the following items are in the box. If any items are 
missing, please return this product to the original place of 
purchase.
CAUTION:
Be sure to save original box and all packing material for future 
transport of monitor.
ACPower Cord
Package Contents
LCD Monitor 
Quick GuideWarranty CardCD-ROM(Driver/Manual)

D-SUB Cable 
DVI Cable(Optional) AUDIO Cable
Warranty  card

Quick0000002700550049004400450038220057002C   
						

							
11Xerox© LCD Monitor User’s Manual
Introduction
ENGLISH
Front View and Controls
1
23
4
5

  MENU
   Press once to display the OSD (On-Screen Display). And 
press to activate the items you highlight .
  DOWN/UP
   In OSD mode, press the DOWN/UP buttons to move the 
selection highlight to the next menu item counterclockwise 
or clockwise, respectively. Adjusts the volume up and down.
  
 AUTO
  Press to automatically adjust the display settings to optimize
      monitor' s performance.
  LED 
   The LED light indicates when the LCD monitor is activated 
(blue light indicates power on and amber light indicates 
power saving).
 
  
   Turns the LCD monitor on and off.
1
2
3
4
5
 
						

							
Installation
12Xerox© LCD Monitor User’s Manual

1 Turn off the computer and unplug the power cord.
2 Connect the signal cable to the D-SUB port on the back of 
the computer.

3 Connect the audio cable to the out port on the back of the 
computer.
4 Connect the power cord to the LCD monitor and wall outlet. 
 
5 Press the     button, located on the bottom side of the main 
unit to turn the monitor on, then turn the computer on. If the 
monitor displays an image, the monitor is successfully 
installed. If no image is displayed, check all connections.
Refer to the owner’s manual of the computer for connections.
In the process of connecting external equipment, do not connect 
any AC power cords to wall outlets until all other connections 
are completed.
2  Installation
Connecting Your LCD Monitor to a Computer 
Method 1 : Analog (D-SUB) Connection
 
						

							
Installation
ENGLISH
13Xerox© LCD Monitor User’s Manual

NOTE:
Unplug the monitor before installation to avoid electric shock or 
damage.
NOTE:
The     button is used for switching the LCD monitor on and 
off, it does not disconnect the device from the main voltage. 
To completely disconnect the main voltage, please remove the 
power plug from the socket. 
NOTE:
The LED indicator is blue or green when the monitor operates 
normally and will turn to amber when in power saving mode.  
When the monitor is off, the LED turns dark.

Connect to power source
Connect to the D-SUB port 2
4

Connect to the out port3
NOTE:
 XM7 series LCD monitor may come with (2 D-SUB) or (2 D-SUB and 
1 DVI) connectors.
2 D-SUB
2 D-SUB+1 DVI
 
						

							
Installation
14Xerox© LCD Monitor User’s Manual

Method 2: Digital (DVI) Connection 
1 Turn off the computer and unplug the power cord.

2 Connect the DVI signal cable to the DVI port 
on the back of the computer.
3 Connect the audio cable to the out port on the back of the 
computer.
4 Connect the power cord to the LCD monitor and wall outlet.   
5 Press the     button, located on the bottom side of the main 
unit to turn the monitor on, then turn the computer on. If the 
monitor displays an image, the monitor is successfully 
installed. If no image is displayed, check all connections.
6 When the DVI and VGA input ports are connected at the 
same time, press down the AUTO button after 3 seconds to 
switch between the VGA mode and DVI mode.
Connect to power source4
2Connect to the DVI port 
Connect to the out port3
Note: HDCP has been implemented across the DVI interface. The HDCP specification provides  a cost-effective 
and transparent method for receiving the highest quality digital entertainment  content from HDMI compliant 
video sources.  (Specified for HDCP models)

2 D-SUB+1 DVI 
 
						

							
Installation
ENGLISH
15Xerox© LCD Monitor User’s Manual

The wide-screen display enables you to view your content in a brand new way. The next 
generation of computing environments and game consoles are starting to support wide-screen 
resolutions.
■  Multitask  -  view applications side by side and reduce toggling between them.
■  Enrich  -  view DVD films in their native wide format for an enhanced multimedia  experience.
■  Experience -  enjoy gaming action at higher wide-screen resolution.
However, to enable wide resolution ( WSXGA+, 1680x1050), you need to select the 
correct setting in your Control Panel>Display>Settings dialog box in Windows ®
. 
Please note, some video cards and PCs with integrated video may not support the 
wide-screen resolutions.  You may have to update the video chip/card driver or even 
purchase a new video card to utilize the advantages of  the wide-screen.
For your PC, refer to the available drivers and downloads from the PC manufacturer’s web site. 
For upgraded video card, refer to the video card manufacturer’s web site: nVIDIA ®
 (www.nvidia.
com), ATI ®
 (www.ati.com), S3 ®
 (www.s3graphics.com), Intel ®
 (ww w.intel.com), and so on.
HOW TO GET SUPPORT FOR YOUR WIDE SCREEN
 
						

							
16Xerox© LCD Monitor User’s Manual
Introduction
Follow the instructions below to set up and install the monitor.
1  The package contains:
  1. Display unit
  2. Stand
2  Cover an even,stable surface with a soft cloth. Place the 
unit face-down on the cloth. Fit the stand onto the bottom 
of the display unit as shown.
3  Use a coin to tighten the screw on 
the bottom of the stand until the 
screw is firmly fixed in place.
STANDDISPLAY UNIT
Installing Your LCD Monitor
4
 
						

							
OSD Menu
ENGLISH
17Xerox© LCD Monitor User’s Manual
NOTE:
If you find that your display card driver does not offer this 
feature, you can purchase aftermarket rotation software from 
manufacturers such as Portrait Displays®.  This monitor 
manufacturer provides no warranty with respect to the use of 
aftermarket display software.  
  To access the SETTINGS dialog box, go to 
START>SETTINGS>CONTROL PANEL>DISPLAY.  Inside 
the DISPLAY PROPERTIES window, go to the SETTINGS 
Tab.  
  If the feature is available, you will find it listed within this 
dialog box. If you have trouble locating this feature, you 
might also visit the website of your display driver 
manufacturer (whose name should be displayed on the 
DISPLAY PROPERTIES>SETTINGS tab) for technical 
assistance.
 
						

							
On-Screen Display (OSD) Menu

18Xerox© LCD Monitor User’s Manual
To create the best picture, your XM7 series has been preset at 
the factory with the Preset Mode Timing shown on page 27.
The OSD (On-Screen Display) Menu allows the user to adjust
various settings and options by following the steps below.
1  Press the MENU button to display the OSD. The OSD main 
menu provides an overview of the selection of controls 
available.
2  Press the DOWN or UP button to highlight the desired icon.  
Then, press the MENU button to activate the highlighted 
icon.
3  Press the DOWN or UP button to select the desired 
adjustment icon. Then, press the MENU button.
4  Press the DOWN or UP button to change the value of the 
selected item.
5  Select the exit icon to exit the OSD.
6  Repeat steps 1 through 4 to make further adjustments. All 
changes are stored immediately. 
Using the OSD Menu
3  On-Screen Display (OSD) Menu
picture
advanced
audio
options
utilities
reset
auto adjust to select
brightness
contrast
h position
v position
phase
clock
exit
exit
source
 
						

							
On-Screen Display (OSD) Menuenu
ENGLISH
19Xerox© LCD Monitor User’s Manual
The main menu includes the following options:
    picture  
 Adjusts picture settings such as brightness and contrast.
     advanced 
 Allows selection of the general color tint: CUSTOM COLOR, 
WARM, or COOL.
     audio
 Allows selection of the sound options and effects.
     options 
 Adjusts OSD settings such as Horizontal/Vertical position,
    H size and 
phase.
     utilities 
 Adjusts the setting of the display time of the on-screen menu.
  Allows selection of the language used on all the on-screen 
menus.
  reset
 Restores the factory settings.
  exit
 Exits the on-screen menus.
The OSD Options
picture
advanced
audio
options
utilities
reset auto adjust 
to select
brightness
contrast
h position
v position
phase
clock
exit
exit
source